| 1234567891011121314151617181920212223242526272829 |
- {
- "version": 2,
- "name": "Sovol SV03",
- "inherits": "sovol_base_titan",
- "metadata":
- {
- "visible": true,
- "quality_definition": "sovol_base_titan"
- },
- "overrides":
- {
- "gantry_height": { "value": 33 },
- "machine_depth": { "default_value": 350 },
- "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
- "machine_head_with_fans_polygon":
- {
- "default_value": [
- [-44, 16],
- [-44, -60],
- [44, -60],
- [44, 16]
- ]
- },
- "machine_height": { "default_value": 400 },
- "machine_name": { "default_value": "SV03" },
- "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nM420 S1 ;use bed mesh, must have used G29 previously\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
- "machine_width": { "default_value": 350 }
- }
- }
|
