Geeetech_Base_Dual_Extruder.def.json 7.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147
  1. {
  2. "version": 2,
  3. "name": "Geeetech Base Dual-Extruder Printer",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": false,
  8. "author": "Teddy.Hu",
  9. "manufacturer": "Geeetech",
  10. "file_formats": "text/x-gcode",
  11. "first_start_actions": [ "MachineSettingsAction" ],
  12. "has_machine_quality": true,
  13. "has_materials": true,
  14. "has_variants": false,
  15. "machine_extruder_trains":
  16. {
  17. "0": "Geeetech_Dual_Extruder_0",
  18. "1": "Geeetech_Dual_Extruder_1"
  19. },
  20. "preferred_material": "generic_pla",
  21. "preferred_quality_type": "standard",
  22. "preferred_variant_name": "0.4mm Nozzle",
  23. "quality_definition": "Geeetech_Base_Single_Extruder",
  24. "variants_name": "Nozzle Size"
  25. },
  26. "overrides":
  27. {
  28. "acceleration_print": { "value": 500 },
  29. "acceleration_travel": { "value": 500 },
  30. "acceleration_travel_layer_0": { "value": "acceleration_travel" },
  31. "adhesion_type": { "value": "'skirt'" },
  32. "brim_replaces_support": { "value": false },
  33. "cool_min_layer_time": { "value": "1.3 if speed_infill>=200 else 5" },
  34. "gantry_height": { "value": 40 },
  35. "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'" },
  36. "line_width": { "value": "1.125*machine_nozzle_size if speed_infill<=100 else machine_nozzle_size" },
  37. "machine_acceleration": { "value": 500 },
  38. "machine_depth": { "default_value": 350 },
  39. "machine_end_gcode": { "default_value": ";Geeetech Custom end G-code\nG91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers\n\n\n" },
  40. "machine_extruder_count": { "default_value": 2 },
  41. "machine_head_with_fans_polygon":
  42. {
  43. "default_value": [
  44. [-40, 40],
  45. [40, 40],
  46. [40, -40],
  47. [-40, -40]
  48. ]
  49. },
  50. "machine_heated_bed": { "default_value": true },
  51. "machine_height": { "default_value": 350 },
  52. "machine_max_acceleration_e": { "value": 1000 },
  53. "machine_max_acceleration_x": { "value": 500 },
  54. "machine_max_acceleration_y": { "value": 500 },
  55. "machine_max_acceleration_z": { "value": 111 },
  56. "machine_max_feedrate_e": { "value": 40 },
  57. "machine_max_feedrate_x": { "value": 500 },
  58. "machine_max_feedrate_y": { "value": 500 },
  59. "machine_max_feedrate_z": { "value": 10 },
  60. "machine_max_jerk_e": { "value": 4.9 },
  61. "machine_max_jerk_xy": { "value": 10 },
  62. "machine_max_jerk_z": { "value": 0.3 },
  63. "machine_name": { "default_value": "Geeetech Base Dual-Extruder Printer" },
  64. "machine_start_gcode": { "default_value": ";Geeetech Custom Start G-code\nM104 S{material_print_temperature_layer_0} ;Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ;Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ;Wait for Hotend Temperature\nG92 E0 ;Reset Extruder\nG28 ;Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ;ON Light\n;M106 P0 S383 ;ON MainFan 150% if need\n;M106 P1 S255 ;ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ;Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ;Draw the first line\nG92 E0 ;Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ;Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ;Scrape off nozzle residue" },
  65. "machine_width": { "default_value": 350 },
  66. "material_bed_temperature": { "maximum_value_warning": 110 },
  67. "material_final_print_temperature": { "value": "material_print_temperature" },
  68. "material_initial_print_temperature":
  69. {
  70. "minimum_value_warning": "material_standby_temperature - 10",
  71. "value": "material_print_temperature - 5"
  72. },
  73. "material_print_temperature":
  74. {
  75. "maximum_value": "250",
  76. "value": "200 if speed_infill <=100 else 210 if speed_infill <= 150 else 220 if speed_infill <= 180 else 230"
  77. },
  78. "material_print_temperature_layer_0":
  79. {
  80. "maximum_value_warning": 250,
  81. "value": "material_print_temperature + 5"
  82. },
  83. "minimum_interface_area": { "value": 10 },
  84. "minimum_support_area": { "value": "2 if support_structure == 'normal' else 0" },
  85. "optimize_wall_printing_order": { "value": true },
  86. "prime_tower_brim_enable": { "value": true },
  87. "prime_tower_min_volume":
  88. {
  89. "maximum_value_warning": 150,
  90. "value": 85
  91. },
  92. "prime_tower_size": { "value": 30 },
  93. "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'all'" },
  94. "retraction_combing_max_distance": { "value": 30 },
  95. "retraction_hop": { "value": 0.5 },
  96. "retraction_speed": { "value": 35 },
  97. "skirt_brim_speed":
  98. {
  99. "maximum_value_warning": "60",
  100. "value": "speed_print_layer_0"
  101. },
  102. "skirt_gap": { "value": 6 },
  103. "small_hole_max_size": { "value": "5 if speed_infill>=150 else 0" },
  104. "speed_layer_0":
  105. {
  106. "maximum_value_warning": "100",
  107. "value": "50 if speed_infill <= 150 else 75"
  108. },
  109. "speed_print_layer_0":
  110. {
  111. "maximum_value_warning": "60",
  112. "value": "25 if speed_infill <= 150 else 35"
  113. },
  114. "speed_support": { "value": "speed_print*0.5" },
  115. "speed_support_bottom": { "value": "speed_support_roof" },
  116. "speed_support_interface": { "value": "speed_support / 0.8" },
  117. "speed_support_roof": { "value": "speed_support_interface / 2" },
  118. "speed_topbottom": { "value": "speed_print" },
  119. "speed_travel": { "value": "200 if 120<=speed_print<=200 else speed_print if speed_print>200 else 120" },
  120. "speed_travel_layer_0":
  121. {
  122. "maximum_value_warning": "150",
  123. "value": "speed_layer_0"
  124. },
  125. "speed_wall": { "value": "60 if speed_print==60 else math.ceil(round(speed_print*0.90))" },
  126. "speed_wall_0": { "value": "30 if speed_print==60 else math.ceil(round(speed_print*0.75))" },
  127. "speed_wall_x": { "value": "60 if speed_print==60 else math.ceil(round(speed_print*0.90))" },
  128. "support_brim_enable": { "value": true },
  129. "support_brim_width": { "value": 5 },
  130. "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
  131. "support_interface_density": { "value": 33.333 },
  132. "support_interface_height": { "value": "layer_height * 3" },
  133. "support_interface_pattern": { "value": "zigzag" },
  134. "support_interface_skip_height": { "value": 0.2 },
  135. "support_pattern": { "value": "'zigzag'" },
  136. "support_wall_count": { "value": 0 },
  137. "support_xy_distance": { "value": "wall_line_width_0 * 2" },
  138. "support_xy_distance_overhang": { "value": "wall_line_width_0" },
  139. "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
  140. "top_bottom_thickness": { "value": "layer_height_0 + layer_height * 3" },
  141. "travel_avoid_supports": { "value": true },
  142. "wall_thickness": { "value": "line_width * 2" },
  143. "wall_transition_filter_deviation": { "value": 0.15 },
  144. "z_seam_corner": { "value": "'z_seam_corner_inner'" },
  145. "z_seam_type": { "value": "'sharpest_corner'" }
  146. }
  147. }