deltacomb_FBE0.40_PETG_A.inst.cfg 835 B

12345678910111213141516171819202122232425262728293031323334353637
  1. [general]
  2. definition = deltacomb_base
  3. name = A
  4. version = 4
  5. [metadata]
  6. material = generic_petg
  7. quality_type = D005
  8. setting_version = 22
  9. type = quality
  10. variant = FBE 0.40mm
  11. [values]
  12. coasting_enable = True
  13. coasting_min_volume = 3
  14. coasting_speed = 70
  15. coasting_volume = 0.256
  16. cool_fan_full_at_height = 1
  17. cool_fan_speed = 60
  18. cool_fan_speed_max = 100
  19. cool_fan_speed_min = 60
  20. infill_enable_travel_optimization = True
  21. initial_layer_line_width_factor = 120
  22. layer_height_0 = 0.2
  23. material_bed_temperature = 60
  24. material_bed_temperature_layer_0 = 45
  25. material_flow = 95
  26. material_print_temperature = 225
  27. retraction_amount = 5
  28. retraction_combing_max_distance = 5
  29. speed_infill = =speed_print
  30. speed_print = 50
  31. speed_roofing = =speed_print * 0.5
  32. speed_wall_0 = =speed_print * 0.5
  33. support_z_distance = =layer_height * 2
  34. travel_avoid_other_parts = False