Cura/resources/quality/ultimaker_s3/um_s3_cc0.4_petcf_0.2mm.inst.cfg

[general]
definition = ultimaker_s3
name = Fast
version = 4

[metadata]
material = generic_petcf
quality_type = draft
setting_version = 22
type = quality
variant = CC 0.4
weight = -2

[values]
infill_overlap = =0 if infill_sparse_density > 80 else 10
raft_airgap = =layer_height * 2
skin_overlap = 20
speed_infill = =speed_print
speed_print = 25
speed_topbottom = =speed_print
speed_wall = =speed_print
speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance / 2
support_z_distance = =layer_height * 2
top_bottom_thickness = 0.8