| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354 |
- {
- "version": 2,
- "name": "Makeit Pro-L",
- "inherits": "fdmprinter",
- "metadata":
- {
- "visible": true,
- "author": "unknown",
- "manufacturer": "Makeit 3D",
- "file_formats": "text/x-gcode",
- "has_materials": false,
- "machine_extruder_trains":
- {
- "0": "makeit_l_dual_1st",
- "1": "makeit_l_dual_2nd"
- }
- },
- "overrides":
- {
- "adhesion_type": { "default_value": "skirt" },
- "cool_min_layer_time_fan_speed_max": { "default_value": 5 },
- "gantry_height": { "value": "330" },
- "infill_sparse_density": { "default_value": 20 },
- "layer_height": { "default_value": 0.2 },
- "machine_center_is_zero": { "default_value": false },
- "machine_depth": { "default_value": 254 },
- "machine_end_gcode": { "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-5 F9000 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5 X+20 Y+20 F9000 ;move Z up a bit\nM117 MAKEiT Pro@Done\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM81" },
- "machine_extruder_count": { "default_value": 2 },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_head_with_fans_polygon":
- {
- "default_value": [
- [-305, 28],
- [-305, -28],
- [305, 28],
- [305, -28]
- ]
- },
- "machine_heat_zone_length": { "default_value": 20 },
- "machine_heated_bed": { "default_value": true },
- "machine_height": { "default_value": 330 },
- "machine_name": { "default_value": "MAKEiT Pro-L" },
- "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG28 ;home\nG1 F200 E30 ;extrude 30 mm of feed stock\nG92 E0 ;zero the extruded length\nG1 E-5 ;retract 5 mm\nG28 SC ;Do homeing, clean nozzles and let printer to know that printing started\nG92 X-6 ;Sets Curas checker board to match printers heated bed coordinates\nG1 F{speed_travel}\nM117 Printing..." },
- "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
- "machine_width": { "default_value": 305 },
- "prime_tower_position_x": { "value": "185" },
- "prime_tower_position_y": { "value": "160" },
- "print_sequence": { "enabled": true },
- "retraction_amount": { "default_value": 6 },
- "retraction_speed": { "default_value": 180 },
- "speed_print": { "default_value": 60 },
- "wall_thickness": { "value": "1.2" }
- }
- }
|
