Cura/resources/extruders/hctech_hc300-m2h_extruder_1.def.json

{
    "version": 2,
    "name": "Right Extruder",
    "inherits": "fdmextruder",
    "metadata":
    {
        "machine": "hctech_hc300-m2h",
        "position": "1"
    },
    "overrides":
    {
        "extruder_nr":
        {
            "default_value": 1,
            "maximum_value": "1"
        },
        "machine_extruder_cooling_fan_number": { "default_value": 0 },
        "machine_extruder_end_code": { "default_value": "G92 E0 ;reset extruder distance\nG1 F800 E-1 ;retract\nG92 E0 ;reset extruder distance\nG1 X0 Y300 F4800 ;move to start position\nG1 X5 Y319 ;move to wait posiotion" },
        "machine_extruder_start_code": { "default_value": "G1 X5 Y319 ;move to wait posiotion\nT1 ;switch to extruder 2\nM109 S{material_print_temperature}\nG1 F5000\nG12 ;clean nozzle\nG1 X0 Y300 F4800 ;move to start point" },
        "machine_nozzle_offset_x": { "default_value": 0.0 },
        "machine_nozzle_offset_y": { "default_value": 0.0 },
        "machine_nozzle_size": { "default_value": 0.4 },
        "material_diameter": { "default_value": 1.75 }
    }
}