ultimaker_original_dual.def.json 4.2 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394
  1. {
  2. "version": 2,
  3. "name": "Ultimaker Original Dual Extrusion",
  4. "inherits": "ultimaker",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Ultimaker",
  9. "manufacturer": "Ultimaker B.V.",
  10. "file_formats": "text/x-gcode",
  11. "platform": "ultimaker_platform.3mf",
  12. "exclude_materials": [
  13. "generic_hips",
  14. "generic_petg",
  15. "generic_bam",
  16. "ultimaker_bam",
  17. "generic_pva",
  18. "ultimaker_pva",
  19. "generic_tough_pla",
  20. "ultimaker_tough_pla_black",
  21. "ultimaker_tough_pla_green",
  22. "ultimaker_tough_pla_red",
  23. "ultimaker_tough_pla_white",
  24. "ultimaker_tough_pla_blue",
  25. "ultimaker_tough_pla_gray",
  26. "ultimaker_tough_pla_yellow",
  27. "generic_cffcpe",
  28. "generic_cffpa",
  29. "generic_gffcpe",
  30. "generic_gffpa",
  31. "generic_petcf",
  32. "structur3d_dap100silicone",
  33. "ultimaker_petg_blue",
  34. "ultimaker_petg_grey",
  35. "ultimaker_petg_black",
  36. "ultimaker_petg_green",
  37. "ultimaker_petg_white",
  38. "ultimaker_petg_orange",
  39. "ultimaker_petg_silver",
  40. "ultimaker_petg_yellow",
  41. "ultimaker_petg_transparent",
  42. "ultimaker_petg_red_translucent",
  43. "ultimaker_petg_blue_translucent",
  44. "ultimaker_petg_green_translucent",
  45. "ultimaker_petg_yellow_fluorescent",
  46. "ultimaker_petg_red",
  47. "ultimaker_petcf_black",
  48. "ultimaker_petcf_blue",
  49. "ultimaker_petcf_gray"
  50. ],
  51. "firmware_file": "MarlinUltimaker-{baudrate}-dual.hex",
  52. "firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}-dual.hex",
  53. "first_start_actions": [
  54. "UMOUpgradeSelection",
  55. "BedLevel"
  56. ],
  57. "has_machine_quality": true,
  58. "has_materials": true,
  59. "machine_extruder_trains":
  60. {
  61. "0": "ultimaker_original_dual_1st",
  62. "1": "ultimaker_original_dual_2nd"
  63. },
  64. "quality_definition": "ultimaker_original",
  65. "supported_actions": [
  66. "UMOUpgradeSelection",
  67. "BedLevel"
  68. ],
  69. "weight": 4
  70. },
  71. "overrides":
  72. {
  73. "gantry_height": { "value": "55" },
  74. "machine_center_is_zero": { "default_value": false },
  75. "machine_depth": { "default_value": 195 },
  76. "machine_end_gcode": { "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
  77. "machine_extruder_count": { "default_value": 2 },
  78. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  79. "machine_head_with_fans_polygon":
  80. {
  81. "default_value": [
  82. [-75, 35],
  83. [-75, -18],
  84. [18, 35],
  85. [18, -18]
  86. ]
  87. },
  88. "machine_height": { "default_value": 200 },
  89. "machine_name": { "default_value": "Ultimaker Original" },
  90. "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nT1 ;Switch to the 2nd extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F200 E-{switch_extruder_retraction_amount}\nT0 ;Switch to the 1st extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
  91. "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
  92. "machine_width": { "default_value": 205 }
  93. }
  94. }