Cura/resources/definitions/two_trees_sapphirepro.def.json

{
    "version": 2,
    "name": "Two Trees Sapphire Pro",
    "inherits": "two_trees_base",
    "metadata":
    {
        "visible": true,
        "platform": "sapphirepro_platform.stl",
        "quality_definition": "two_trees_base"
    },
    "overrides":
    {
        "gantry_height": { "value": 65 },
        "infill_material_flow": { "value": 100 },
        "infill_overlap": { "value": 30 },
        "machine_depth": { "default_value": 220 },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-30, 19],
                [30, 19],
                [30, -49],
                [-30, -49]
            ]
        },
        "machine_height": { "default_value": 220 },
        "machine_name": { "default_value": "Two Trees Sapphire Pro" },
        "machine_start_gcode": { "default_value": "G28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move bed down\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Bed up" },
        "machine_width": { "default_value": 220 },
        "material_flow": { "value": 90 },
        "retraction_amount": { "default_value": 7 },
        "retraction_speed": { "default_value": 40 },
        "skin_overlap": { "value": 20 },
        "speed_print": { "value": 60.0 },
        "speed_travel": { "value": 180 },
        "speed_travel_layer_0": { "value": 100 }
    }
}