Cura/resources/definitions/mbot3d_grid2plus.def.json

{
    "version": 2,
    "name": "MBot3D Grid 2+",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Magicfirm",
        "manufacturer": "Magicfirm",
        "file_formats": "application/x3g",
        "machine_extruder_trains": { "0": "mbot3d_grid2_extruder_0" },
        "machine_x3g_variant": "r1"
    },
    "overrides":
    {
        "gantry_height": { "value": 10 },
        "infill_overlap": { "value": "12 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0" },
        "machine_center_is_zero": { "default_value": true },
        "machine_depth": { "default_value": 210 },
        "machine_end_gcode": { "default_value": "M18 A B(Turn off A and B steppers)\nG1 Z190 F900\nG162 X Y F2000\nM18 X Y Z(Turn off steppers after a build)\nM104 S0 T0\nM72 P1  ( Play Ta-Da song )\nM73 P100 (end  build progress )\nM137 (build end)\n" },
        "machine_gcode_flavor": { "default_value": "Makerbot" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-37, 50],
                [25, 50],
                [25, -40],
                [-37, -40]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 190 },
        "machine_name": { "default_value": "MBot3D Grid 2+" },
        "machine_start_gcode": { "default_value": "M136\nG162 X Y F2000\nG161 Z F900\nG92 X0 Y0 Z-5 A0 B0\nG1 Z0.0 F900\nG161 Z F100\nM132 X Y Z A B\nG1 X125 Y115 Z10 F450\nG1 X0 Y115 Z10 F2000.0\nM133 T0\nG1 X20 Y115 Z0.5 F800\nG1 X0 Y115 Z0.5 F600 A12\nG92 A0\n" },
        "machine_steps_per_mm_e": { "default_value": 96.27520187033366 },
        "machine_steps_per_mm_x": { "default_value": 88.888889 },
        "machine_steps_per_mm_y": { "default_value": 88.888889 },
        "machine_steps_per_mm_z": { "default_value": 400 },
        "machine_width": { "default_value": 235 },
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "raft_airgap": { "default_value": 0.15 },
        "raft_margin": { "default_value": 6 },
        "retract_at_layer_change": { "default_value": true },
        "retraction_amount": { "default_value": 0.7 },
        "retraction_speed": { "default_value": 15 },
        "speed_layer_0": { "value": 15 },
        "speed_print": { "default_value": 50 },
        "speed_travel": { "value": 80 },
        "speed_wall": { "value": 25 },
        "speed_wall_x": { "value": 35 },
        "support_interface_density": { "default_value": 80 },
        "support_interface_enable": { "default_value": true },
        "support_interface_height": { "default_value": 0.8 },
        "support_interface_pattern": { "default_value": "grid" },
        "travel_avoid_other_parts": { "default_value": false },
        "travel_retract_before_outer_wall": { "default_value": true }
    }
}