| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970 |
- {
- "version": 2,
- "name": "Lotmaxx Shark",
- "inherits": "fdmprinter",
- "metadata":
- {
- "visible": true,
- "author": "lotmaxx.com",
- "manufacturer": "Lotmaxx",
- "platform": "lotmaxx_sc_10_20_platform.3mf",
- "has_materials": true,
- "machine_extruder_trains":
- {
- "0": "lotmaxx_sc60_extruder_left",
- "1": "lotmaxx_sc60_extruder_right"
- },
- "preferred_quality_type": "normal"
- },
- "overrides":
- {
- "acceleration_print": { "value": 1000 },
- "acceleration_travel": { "value": 1000 },
- "acceleration_travel_layer_0": { "value": 1000.0 },
- "adhesion_type": { "default_value": "skirt" },
- "expand_skins_expand_distance": { "value": 0.8 },
- "fill_outline_gaps": { "default_value": false },
- "gantry_height": { "value": 29 },
- "infill_sparse_density": { "value": 15 },
- "machine_depth": { "default_value": 235 },
- "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
- "machine_head_with_fans_polygon":
- {
- "default_value": [
- [-50.7, 16.8],
- [-50.7, -29.5],
- [46.9, -29.5],
- [49.9, 16.8]
- ]
- },
- "machine_heated_bed": { "value": true },
- "machine_height": { "default_value": 265 },
- "machine_name": { "default_value": "Lotmaxx Shark" },
- "machine_start_gcode": { "default_value": "G28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
- "machine_width": { "default_value": 235 },
- "meshfix_maximum_resolution": { "value": 0.25 },
- "optimize_wall_printing_order": { "value": true },
- "prime_tower_enable": { "value": true },
- "prime_tower_min_volume": { "value": 30 },
- "retract_at_layer_change": { "value": false },
- "retraction_amount": { "value": 4.5 },
- "roofing_layer_count": { "value": 1 },
- "skin_preshrink": { "value": 0.8 },
- "speed_layer_0": { "value": 30 },
- "speed_print": { "value": 45 },
- "speed_roofing": { "value": 35 },
- "speed_topbottom": { "value": 35 },
- "speed_travel": { "value": 80 },
- "speed_wall_0": { "value": 32 },
- "speed_wall_x": { "value": 32 },
- "support_infill_rate": { "value": 5 },
- "support_pattern": { "default_value": "lines" },
- "switch_extruder_retraction_amount": { "value": 100 },
- "switch_extruder_retraction_speeds": { "value": 60 },
- "wall_overhang_speed_factor": { "value": 50 },
- "z_seam_corner": { "default_value": "z_seam_corner_any" },
- "z_seam_relative": { "value": true },
- "z_seam_type": { "default_value": "sharpest_corner" },
- "zig_zaggify_infill": { "value": true }
- }
- }
|
