| 1234567891011121314151617181920212223242526272829303132333435 |
- {
- "version": 2,
- "name": "JGAurora Z-603S",
- "inherits": "fdmprinter",
- "metadata":
- {
- "visible": true,
- "author": "Samuel Pinches",
- "manufacturer": "JGAurora",
- "file_formats": "text/x-gcode",
- "machine_extruder_trains": { "0": "jgaurora_z_603s_extruder_0" },
- "preferred_quality_type": "fast"
- },
- "overrides":
- {
- "gantry_height": { "value": "10" },
- "layer_height_0": { "default_value": 0.2 },
- "machine_center_is_zero": { "default_value": false },
- "machine_depth": { "default_value": 180 },
- "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 Y0 F600 ;move to the X/Y-axis origin (Home)\nM84 ;turn off stepper motors\n; -- end of END GCODE --" },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_heated_bed": { "default_value": true },
- "machine_height": { "default_value": 175 },
- "machine_name": { "default_value": "JGAurora Z-603S" },
- "machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 ;home all axis\nM420 S1 ;turn on mesh bed levelling if enabled in firmware\nG92 E0 ;zero the extruded length\nG1 Z1 F1000 ;move up slightly\nG1 X60.0 Z0 E9.0 F1000.0;intro line\nG1 X100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --" },
- "machine_width": { "default_value": 280 },
- "material_diameter": { "default_value": 1.75 },
- "retraction_amount": { "default_value": 5 },
- "retraction_enable": { "default_value": true },
- "retraction_speed": { "default_value": 50 },
- "speed_print": { "default_value": 60 },
- "support_enable": { "default_value": true },
- "wall_thickness": { "value": "1.2" }
- }
- }
|
