Cura/resources/definitions/anycubic_vyper.def.json

{
    "version": 2,
    "name": "Anycubic Vyper",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "ThatGuyZim",
        "manufacturer": "Anycubic",
        "file_formats": "text/x-gcode",
        "platform": "anycubic_vyper_platform.stl",
        "machine_extruder_trains": { "0": "anycubic_vyper_extruder_0" }
    },
    "overrides":
    {
        "gantry_height": { "value": "0" },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 255 },
        "machine_end_gcode": { "default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 S1318 P266" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 265 },
        "machine_name": { "default_value": "Anycubic Vyper" },
        "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nM300 S1318 P266\nG28 Z0 ;move Z to min endstops\nG0 Z0.2\nG92 E0 ;zero the extruded length\nG1 X40 E25 F400 ; Extrude 25mm of filament in a 4cm line. Reduce speed (F) if you have a nozzle smaller than 0.4mm!\nG92 E0 ;zero the extruded length again\nG1 E-1 F500 ; Retract a little\nG1 X80 F4000 ; Quickly wipe away from the filament line\nM117 ; Printing\u2026\nG5" },
        "machine_width": { "default_value": 250 }
    }
}