anycubic_kobra_go.def.json 2.4 KB

1234567891011121314151617181920212223242526272829
  1. {
  2. "version": 2,
  3. "name": "Anycubic Kobra Go",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Kolja Lampe",
  9. "manufacturer": "Anycubic",
  10. "file_formats": "text/x-gcode",
  11. "firmware_file": "MarlinChiron.hex",
  12. "has_machine_quality": true,
  13. "has_materials": true,
  14. "machine_extruder_trains": { "0": "anycubic_kobra_go_extruder_0" },
  15. "preferred_material": "generic_pla",
  16. "preferred_quality_type": "pla",
  17. "quality_definition": "anycubic_kobra_go"
  18. },
  19. "overrides":
  20. {
  21. "machine_depth": { "default_value": 222 },
  22. "machine_end_gcode": { "default_value": "M400 ; Wait for current moves to finish\nM220 S100 ; Reset Speed factor override percentage to default (100%)\nM221 S100 ; Reset Extrude factor override percentage to default (100%)\nG91 ; Set coordinates to relative\nG1 F2400 E-1 ; Retract filament 3mm at 40mm/s to prevent stringing\nG0 F5000 Z20 ; Move Z Axis up 20mm to allow filament ooze freely\nG90 ; Set coordinates to absolute\nG0 X0 Y220 F5000 ; Move Heat Bed to the front for easy print removal\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; Disable stepper motors\n; End of custom end GCode" },
  23. "machine_heated_bed": { "default_value": true },
  24. "machine_height": { "default_value": 250 },
  25. "machine_name": { "default_value": "Anycubic Kobra Go" },
  26. "machine_start_gcode": { "default_value": "M140 S[first_layer_bed_temperature]; Heat bed\nM104 S[first_layer_temperature\n ]; Heat extruder\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nM420 S1 ; Enable Bed Levelling Mesh\nM190 S[first_layer_bed_temperature\n ]; Wait for bed to get up to temperature\nM109 S[first_layer_temperature\n ]; Wait for extruder to get up to temperature\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X2 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X2 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X2.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X2.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 F2400 E-1\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish" },
  27. "machine_width": { "default_value": 222 }
  28. }
  29. }