creality_base.def.json 9.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177
  1. {
  2. "version": 2,
  3. "name": "Creality Base Printer",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": false,
  8. "author": "trouch.com",
  9. "manufacturer": "Creality3D",
  10. "file_formats": "text/x-gcode",
  11. "exclude_materials": [
  12. "Vertex_Delta_ABS",
  13. "Vertex_Delta_PET",
  14. "Vertex_Delta_PLA",
  15. "Vertex_Delta_TPU",
  16. "chromatik_pla",
  17. "dsm_arnitel2045_175",
  18. "dsm_novamid1070_175",
  19. "fabtotum_abs",
  20. "fabtotum_nylon",
  21. "fabtotum_pla",
  22. "fabtotum_tpu",
  23. "fiberlogy_hd_pla",
  24. "filo3d_pla",
  25. "filo3d_pla_green",
  26. "filo3d_pla_red",
  27. "generic_abs",
  28. "generic_bam",
  29. "generic_cffcpe",
  30. "generic_cffpa",
  31. "generic_cpe",
  32. "generic_cpe_plus",
  33. "generic_gffcpe",
  34. "generic_gffpa",
  35. "generic_hips",
  36. "generic_nylon",
  37. "generic_pc",
  38. "generic_petg",
  39. "generic_pla",
  40. "generic_pp",
  41. "generic_pva",
  42. "generic_tough_pla",
  43. "generic_tpu",
  44. "imade3d_petg_green",
  45. "imade3d_petg_pink",
  46. "imade3d_pla_green",
  47. "imade3d_pla_pink",
  48. "innofill_innoflex60_175",
  49. "octofiber_pla",
  50. "polyflex_pla",
  51. "polymax_pla",
  52. "polyplus_pla",
  53. "polywood_pla",
  54. "structur3d_dap100silicone",
  55. "tizyx_abs",
  56. "tizyx_pla",
  57. "tizyx_pla_bois",
  58. "verbatim_bvoh_175",
  59. "zyyx_pro_flex",
  60. "zyyx_pro_pla"
  61. ],
  62. "first_start_actions": [ "MachineSettingsAction" ],
  63. "has_machine_quality": true,
  64. "has_materials": true,
  65. "has_variants": true,
  66. "machine_extruder_trains": { "0": "creality_base_extruder_0" },
  67. "preferred_material": "generic_pla",
  68. "preferred_quality_type": "standard",
  69. "preferred_variant_name": "0.4mm Nozzle",
  70. "variants_name": "Nozzle Size"
  71. },
  72. "overrides":
  73. {
  74. "acceleration_enabled": { "value": false },
  75. "acceleration_print": { "value": 500 },
  76. "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
  77. "acceleration_travel": { "value": 500 },
  78. "acceleration_travel_layer_0": { "value": "acceleration_travel" },
  79. "adaptive_layer_height_variation": { "value": 0.04 },
  80. "adaptive_layer_height_variation_step": { "value": 0.04 },
  81. "adhesion_type": { "value": "'skirt'" },
  82. "brim_replaces_support": { "value": false },
  83. "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
  84. "cool_min_layer_time": { "value": 10 },
  85. "fill_outline_gaps": { "value": false },
  86. "infill_before_walls": { "value": false },
  87. "infill_overlap": { "value": 30.0 },
  88. "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
  89. "infill_wipe_dist": { "value": 0.0 },
  90. "jerk_enabled": { "value": false },
  91. "jerk_print": { "value": 8 },
  92. "jerk_travel": { "value": "jerk_print" },
  93. "jerk_travel_layer_0": { "value": "jerk_travel" },
  94. "machine_acceleration": { "value": 500 },
  95. "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
  96. "machine_heated_bed": { "default_value": true },
  97. "machine_max_acceleration_e": { "value": 5000 },
  98. "machine_max_acceleration_x": { "value": 500 },
  99. "machine_max_acceleration_y": { "value": 500 },
  100. "machine_max_acceleration_z": { "value": 100 },
  101. "machine_max_feedrate_e": { "value": 50 },
  102. "machine_max_feedrate_x": { "value": 500 },
  103. "machine_max_feedrate_y": { "value": 500 },
  104. "machine_max_feedrate_z": { "value": 10 },
  105. "machine_max_jerk_e": { "value": 5 },
  106. "machine_max_jerk_xy": { "value": 10 },
  107. "machine_max_jerk_z": { "value": 0.4 },
  108. "machine_name": { "default_value": "Creawsome Base Printer" },
  109. "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
  110. "material_diameter": { "default_value": 1.75 },
  111. "material_final_print_temperature": { "value": "material_print_temperature" },
  112. "material_initial_print_temperature": { "value": "material_print_temperature" },
  113. "meshfix_maximum_resolution": { "value": "0.25" },
  114. "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
  115. "minimum_interface_area": { "value": 10 },
  116. "minimum_support_area": { "value": 2 },
  117. "optimize_wall_printing_order": { "value": "True" },
  118. "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
  119. "retraction_combing_max_distance": { "value": 30 },
  120. "retraction_count_max": { "value": 100 },
  121. "retraction_extrusion_window": { "value": 10 },
  122. "retraction_hop": { "value": 0.2 },
  123. "retraction_min_travel": { "value": 1.5 },
  124. "retraction_prime_speed":
  125. {
  126. "maximum_value": 200,
  127. "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
  128. },
  129. "retraction_retract_speed":
  130. {
  131. "maximum_value": 200,
  132. "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
  133. },
  134. "retraction_speed":
  135. {
  136. "maximum_value": 200,
  137. "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
  138. },
  139. "skin_overlap": { "value": 10.0 },
  140. "skirt_gap": { "value": 10.0 },
  141. "skirt_line_count": { "value": 3 },
  142. "speed_layer_0": { "value": 20.0 },
  143. "speed_prime_tower": { "value": "speed_topbottom" },
  144. "speed_print": { "value": 50.0 },
  145. "speed_roofing": { "value": "speed_topbottom" },
  146. "speed_support": { "value": "speed_wall_0" },
  147. "speed_support_interface": { "value": "speed_topbottom" },
  148. "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
  149. "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
  150. "speed_wall_x": { "value": "speed_wall" },
  151. "speed_z_hop": { "value": 5 },
  152. "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width / 2.0 /layer_height)))" },
  153. "support_brim_enable": { "value": true },
  154. "support_brim_width": { "value": 4 },
  155. "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
  156. "support_interface_density": { "value": 33.333 },
  157. "support_interface_enable": { "value": true },
  158. "support_interface_height": { "value": "layer_height * 4" },
  159. "support_interface_pattern": { "value": "'grid'" },
  160. "support_interface_skip_height": { "value": 0.2 },
  161. "support_pattern": { "value": "'zigzag'" },
  162. "support_top_distance": { "value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance') + (layer_height if support_structure == 'tree' else 0)" },
  163. "support_wall_count": { "value": 1 },
  164. "support_xy_distance": { "value": "wall_line_width_0 * 2" },
  165. "support_xy_distance_overhang": { "value": "wall_line_width_0" },
  166. "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
  167. "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
  168. "top_bottom_thickness": { "value": "layer_height_0 + layer_height * 3" },
  169. "travel_avoid_other_parts": { "value": true },
  170. "travel_avoid_supports": { "value": true },
  171. "travel_retract_before_outer_wall": { "value": true },
  172. "wall_0_wipe_dist": { "value": 0.0 },
  173. "wall_thickness": { "value": "line_width * 2" },
  174. "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
  175. "z_seam_type": { "value": "'back'" }
  176. }
  177. }