builder_premium_small.def.json 5.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104
  1. {
  2. "version": 2,
  3. "name": "Builder Premium Small",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Builder SZ",
  9. "manufacturer": "Builder",
  10. "file_formats": "text/x-gcode",
  11. "platform": "builder_premium_platform.3mf",
  12. "has_machine_quality": true,
  13. "machine_extruder_trains":
  14. {
  15. "0": "builder_premium_small_rear",
  16. "1": "builder_premium_small_front"
  17. },
  18. "platform_offset": [
  19. -126,
  20. -36,
  21. 117
  22. ],
  23. "preferred_quality_type": "normal"
  24. },
  25. "overrides":
  26. {
  27. "acceleration_enabled": { "value": true },
  28. "acceleration_layer_0": { "value": "acceleration_topbottom" },
  29. "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
  30. "acceleration_print": { "value": "3000" },
  31. "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
  32. "acceleration_support_interface": { "value": "acceleration_topbottom" },
  33. "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 3000)" },
  34. "acceleration_travel": { "value": "acceleration_print" },
  35. "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 3000)" },
  36. "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" },
  37. "adhesion_type": { "default_value": "skirt" },
  38. "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
  39. "cool_min_layer_time": { "default_value": 10 },
  40. "default_material_print_temperature": { "value": "215" },
  41. "gantry_height": { "value": "55" },
  42. "infill_before_walls": { "value": false },
  43. "infill_pattern": { "value": "'triangles'" },
  44. "jerk_enabled": { "value": "True" },
  45. "jerk_layer_0": { "value": "jerk_topbottom" },
  46. "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
  47. "jerk_print": { "value": "25" },
  48. "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
  49. "jerk_support_interface": { "value": "jerk_topbottom" },
  50. "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
  51. "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
  52. "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
  53. "machine_acceleration": { "default_value": 1000 },
  54. "machine_depth": { "default_value": 205 },
  55. "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
  56. "machine_extruder_count": { "default_value": 2 },
  57. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  58. "machine_head_with_fans_polygon":
  59. {
  60. "default_value": [
  61. [-75, -18],
  62. [-75, 35],
  63. [18, 35],
  64. [18, -18]
  65. ]
  66. },
  67. "machine_heated_bed": { "default_value": true },
  68. "machine_height": { "default_value": 200 },
  69. "machine_max_acceleration_z": { "default_value": 500 },
  70. "machine_max_feedrate_x": { "default_value": 300 },
  71. "machine_max_feedrate_y": { "default_value": 300 },
  72. "machine_max_feedrate_z": { "default_value": 40 },
  73. "machine_max_jerk_xy": { "default_value": 10 },
  74. "machine_name": { "default_value": "Builder Premium Small" },
  75. "machine_nozzle_cool_down_speed": { "default_value": 2 },
  76. "machine_nozzle_heat_up_speed": { "default_value": 2 },
  77. "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E15 ;extrude 15mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nT0 ;Start with Rear Extruder\n;Put printing message on LCD screen\nM117 Printing..." },
  78. "machine_width": { "default_value": 215 },
  79. "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
  80. "material_standby_temperature": { "value": "material_print_temperature" },
  81. "prime_blob_enable": { "enabled": true },
  82. "prime_tower_min_volume": { "default_value": 50 },
  83. "prime_tower_position_x": { "value": "175" },
  84. "prime_tower_position_y": { "value": "178" },
  85. "prime_tower_wipe_enabled": { "default_value": false },
  86. "retraction_amount": { "default_value": 3 },
  87. "retraction_speed": { "default_value": 15 },
  88. "skin_overlap": { "value": "15" },
  89. "speed_layer_0": { "value": "20" },
  90. "speed_prime_tower": { "value": "speed_topbottom" },
  91. "speed_print": { "value": "40" },
  92. "speed_support": { "value": "speed_wall_0" },
  93. "speed_support_interface": { "value": "speed_topbottom" },
  94. "speed_topbottom": { "value": "math.ceil(speed_print * 20 / 35)" },
  95. "speed_travel": { "value": "100" },
  96. "speed_wall": { "value": "math.ceil(speed_print * 30 / 40)" },
  97. "speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 25)" },
  98. "speed_wall_x": { "value": "speed_wall" },
  99. "switch_extruder_retraction_amount": { "value": 1 },
  100. "switch_extruder_retraction_speeds": { "default_value": 15 },
  101. "travel_retract_before_outer_wall": { "default_value": true },
  102. "wall_thickness": { "value": "1.2" }
  103. }
  104. }