ultimaker3_aa0.8.inst.cfg 1.2 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546
  1. [general]
  2. definition = ultimaker3
  3. name = AA 0.8
  4. version = 4
  5. [metadata]
  6. hardware_type = nozzle
  7. setting_version = 21
  8. type = variant
  9. [values]
  10. brim_width = 7
  11. cool_fan_speed = 7
  12. default_material_print_temperature = 200
  13. infill_overlap = 0
  14. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  15. infill_wipe_dist = 0
  16. jerk_print = 25
  17. layer_height = 0.2
  18. machine_min_cool_heat_time_window = 15
  19. machine_nozzle_cool_down_speed = 0.85
  20. machine_nozzle_heat_up_speed = 1.5
  21. machine_nozzle_id = AA 0.8
  22. machine_nozzle_size = 0.8
  23. machine_nozzle_tip_outer_diameter = 2.0
  24. multiple_mesh_overlap = 0
  25. prime_tower_enable = False
  26. prime_tower_wipe_enabled = True
  27. raft_surface_layers = 1
  28. retraction_amount = 6.5
  29. retraction_hop = 2
  30. retraction_hop_only_when_collides = True
  31. retraction_min_travel = =line_width * 2
  32. skin_overlap = 5
  33. speed_print = 35
  34. speed_topbottom = =math.ceil(speed_print * 25 / 35)
  35. speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
  36. support_angle = 60
  37. support_bottom_distance = =support_z_distance / 2
  38. support_top_distance = =support_z_distance
  39. support_z_distance = =layer_height * 2
  40. switch_extruder_prime_speed = 20
  41. switch_extruder_retraction_amount = 16.5
  42. top_bottom_thickness = 1.4
  43. wall_0_inset = 0