atmat_signal_pro_base.def.json 8.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176
  1. {
  2. "version": 2,
  3. "name": "Signal Pro Base",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": false,
  8. "author": "ATMAT",
  9. "manufacturer": "ATMAT sp. z o.o.",
  10. "file_formats": "text/x-gcode",
  11. "exclude_materials": [
  12. "dsm_arnitel2045",
  13. "dsm_novamid1070",
  14. "generic_cpe",
  15. "imade3d_petg",
  16. "imade3d_pla",
  17. "innofill_innoflex60",
  18. "verbatim_bvoh"
  19. ],
  20. "has_machine_quality": true,
  21. "has_materials": true,
  22. "has_variants": true,
  23. "machine_extruder_trains":
  24. {
  25. "0": "atmat_signal_pro_extruder_left",
  26. "1": "atmat_signal_pro_extruder_right"
  27. },
  28. "preferred_material": "generic_pla_175",
  29. "preferred_quality_type": "fast",
  30. "preferred_variant_name": "V6 0.40mm",
  31. "supports_network_connection": false,
  32. "supports_usb_connection": false,
  33. "variants_name": "Nozzle"
  34. },
  35. "overrides":
  36. {
  37. "acceleration_enabled": { "value": "True" },
  38. "acceleration_layer_0": { "value": "250" },
  39. "acceleration_prime_tower": { "value": "1000" },
  40. "acceleration_print": { "value": "1000" },
  41. "acceleration_support": { "value": "1000" },
  42. "acceleration_support_interface": { "value": "750" },
  43. "acceleration_topbottom": { "value": "750" },
  44. "acceleration_travel": { "value": "1000" },
  45. "acceleration_wall": { "value": "750" },
  46. "acceleration_wall_0": { "value": "500" },
  47. "adhesion_type": { "default_value": "skirt" },
  48. "alternate_extra_perimeter": { "value": "True" },
  49. "bridge_fan_speed": { "value": "100" },
  50. "bridge_fan_speed_2": { "resolve": "max(cool_fan_speed, 50)" },
  51. "bridge_fan_speed_3": { "resolve": "max(cool_fan_speed, 20)" },
  52. "bridge_settings_enabled": { "value": "True" },
  53. "bridge_wall_coast": { "value": "10" },
  54. "build_volume_temperature": { "maximum_value_warning": 45 },
  55. "cool_fan_full_at_height": { "value": "resolveOrValue('layer_height_0') + resolveOrValue('layer_height') * max(1, cool_fan_full_layer - 1)" },
  56. "cool_fan_full_layer": { "value": "4" },
  57. "cool_fan_speed_min": { "value": "cool_fan_speed" },
  58. "cool_min_layer_time": { "value": "15" },
  59. "cool_min_layer_time_fan_speed_max": { "value": "20" },
  60. "extruder_prime_pos_abs": { "value": "True" },
  61. "fill_outline_gaps": { "value": "True" },
  62. "gantry_height": { "value": 30 },
  63. "infill_before_walls": { "value": "False" },
  64. "infill_enable_travel_optimization": { "value": "True" },
  65. "jerk_enabled": { "value": "True" },
  66. "jerk_layer_0": { "value": "5" },
  67. "jerk_prime_tower": { "value": "jerk_print" },
  68. "jerk_print": { "value": "10" },
  69. "jerk_support": { "value": "jerk_print" },
  70. "jerk_support_interface": { "value": "jerk_print" },
  71. "jerk_topbottom": { "value": "jerk_print" },
  72. "jerk_travel": { "value": "jerk_layer_0" },
  73. "jerk_travel_layer_0": { "value": "jerk_layer_0" },
  74. "jerk_wall": { "value": "jerk_print" },
  75. "jerk_wall_0": { "value": "jerk_print" },
  76. "layer_height_0": { "resolve": "max(0.2, min(extruderValues('layer_height')))" },
  77. "line_width": { "value": "machine_nozzle_size * 1.125" },
  78. "machine_acceleration": { "default_value": 1500 },
  79. "machine_depth": { "default_value": 300 },
  80. "machine_end_gcode": { "default_value": "M104 T0 S0 ;extruder heater off\nM104 T1 S0 ;extruder heater off\nM140 S0 ;heated bed heater off\nG91\nG1 Z1 F420 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 E-1 F300 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y300 F6000 ;move the head out of the way\nM84 ;steppers off" },
  81. "machine_extruder_count": { "default_value": 2 },
  82. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  83. "machine_head_with_fans_polygon":
  84. {
  85. "default_value": [
  86. [-35, 65],
  87. [-35, -50],
  88. [35, -50],
  89. [35, 65]
  90. ]
  91. },
  92. "machine_heated_bed": { "default_value": true },
  93. "machine_heated_build_volume": { "default_value": true },
  94. "machine_height": { "default_value": 300 },
  95. "machine_max_acceleration_x": { "default_value": 1500 },
  96. "machine_max_acceleration_y": { "default_value": 1500 },
  97. "machine_max_acceleration_z": { "default_value": 250 },
  98. "machine_max_feedrate_e": { "default_value": 120 },
  99. "machine_max_feedrate_z": { "default_value": 10 },
  100. "machine_max_jerk_e": { "default_value": 15 },
  101. "machine_max_jerk_xy": { "default_value": 15 },
  102. "machine_max_jerk_z": { "default_value": 1 },
  103. "machine_name": { "default_value": "Signal Pro" },
  104. "machine_start_gcode": { "default_value": "G21 ; set units to millimeters\nG90 ; use absolute positioning\nM82 ; absolute extrusion mode\nG28 ; home all without mesh bed level\nM420 S1\nG92 E0.0 ; reset extruder distance position\nG1 Z0.25\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E21.5 F1000.0 ; intro line\nG92 E0.0 ; reset extruder distance position" },
  105. "machine_width": { "default_value": 300 },
  106. "material_bed_temperature": { "maximum_value_warning": 140 },
  107. "material_print_temperature": { "maximum_value_warning": 295 },
  108. "meshfix_maximum_deviation": { "value": "layer_height / 2" },
  109. "meshfix_maximum_resolution": { "value": "0.01" },
  110. "min_infill_area": { "value": "5.0" },
  111. "minimum_polygon_circumference": { "value": "0.2" },
  112. "optimize_wall_printing_order": { "value": "True" },
  113. "prime_tower_enable": { "value": "True" },
  114. "prime_tower_position_x": { "value": "270" },
  115. "prime_tower_position_y": { "value": "270" },
  116. "retraction_amount": { "value": "1" },
  117. "retraction_combing": { "value": "'noskin'" },
  118. "retraction_combing_max_distance": { "value": "10" },
  119. "retraction_hop": { "value": "0.5" },
  120. "retraction_hop_enabled": { "value": "True" },
  121. "retraction_prime_speed":
  122. {
  123. "maximum_value_warning": "130",
  124. "value": "math.ceil(retraction_speed * 0.4)"
  125. },
  126. "retraction_retract_speed":
  127. {
  128. "maximum_value_warning": "130",
  129. "value": "retraction_speed"
  130. },
  131. "retraction_speed":
  132. {
  133. "maximum_value_warning": "130",
  134. "value": "50"
  135. },
  136. "roofing_layer_count": { "value": "1" },
  137. "skirt_brim_minimal_length": { "value": "550" },
  138. "speed_layer_0": { "value": "math.ceil(speed_print * 0.25)" },
  139. "speed_roofing": { "value": "math.ceil(speed_print * 0.45)" },
  140. "speed_slowdown_layers": { "value": "2" },
  141. "speed_topbottom": { "value": "math.ceil(speed_print * 0.45)" },
  142. "speed_travel":
  143. {
  144. "maximum_value": "150",
  145. "maximum_value_warning": "151",
  146. "value": "150"
  147. },
  148. "speed_travel_layer_0": { "value": "math.ceil(speed_travel * 0.4)" },
  149. "speed_wall": { "value": "math.ceil(speed_print * 0.50)" },
  150. "speed_wall_0": { "value": "math.ceil(speed_print * 0.50)" },
  151. "speed_wall_x": { "value": "math.ceil(speed_print * 0.75)" },
  152. "support_angle": { "value": "60" },
  153. "support_bottom_distance": { "value": "support_z_distance / 2" },
  154. "support_bottom_enable": { "value": "False" },
  155. "support_brim_enable": { "value": "True" },
  156. "support_infill_rate": { "value": "20" },
  157. "support_interface_enable": { "value": "True" },
  158. "support_interface_height": { "value": "1" },
  159. "support_interface_skip_height": { "value": "layer_height" },
  160. "support_join_distance": { "value": "1" },
  161. "support_offset": { "value": "1.5" },
  162. "support_pattern": { "default_value": "zigzag" },
  163. "support_top_distance": { "value": "support_z_distance" },
  164. "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
  165. "support_xy_distance_overhang": { "value": "wall_line_width_0" },
  166. "support_z_distance": { "value": "layer_height" },
  167. "switch_extruder_prime_speed": { "value": "15" },
  168. "switch_extruder_retraction_amount": { "value": "2" },
  169. "travel_avoid_other_parts": { "value": "True" },
  170. "travel_avoid_supports": { "value": "True" },
  171. "wall_line_width": { "value": "machine_nozzle_size" },
  172. "wall_overhang_angle": { "value": "75" },
  173. "wall_overhang_speed_factor": { "value": "50" },
  174. "zig_zaggify_infill": { "value": "True" }
  175. }
  176. }