Cura/resources/quality/liquid/liquid_vo0.4_CPE_Fast_Print.inst.cfg

[general]
definition = liquid
name = Normal
version = 4

[metadata]
material = generic_cpe
quality_type = fast
setting_version = 21
type = quality
variant = VO 0.4
weight = -1

[values]
cool_min_speed = 7
infill_pattern = triangles
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 5
retraction_combing_max_distance = 50
speed_infill = =math.ceil(speed_print * 50 / 60)
speed_layer_0 = =math.ceil(speed_print * 20 / 60)
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 30 / 60)
speed_wall = =math.ceil(speed_print * 40 / 60)
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)