| .. |
|
um_s3_aa0.4_abs_0.06mm_visual.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_abs_0.15mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_abs_0.15mm_visual.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_abs_0.1mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_abs_0.1mm_visual.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_abs_0.2mm_quick.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_cpe-plus_0.15mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_cpe-plus_0.1mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_cpe_0.15mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_cpe_0.1mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_nylon_0.15mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_nylon_0.1mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_pc_0.15mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_pc_0.1mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_petg_0.15mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_petg_0.1mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_pla_0.06mm_visual.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_pla_0.15mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_pla_0.15mm_visual.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_pla_0.1mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_pla_0.1mm_visual.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_pla_0.2mm_quick.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_pla_0.3mm_quick.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.06mm_visual.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.15mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.15mm_visual.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.1mm_engineering.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.1mm_visual.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.2mm_quick.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.3mm_quick.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-pla_0.15mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-pla_0.15mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-pla_0.2mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-pla_0.2mm_quick.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-pla_0.2mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.8_um-abs_0.2mm_quick.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.8_um-abs_0.2mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.8_um-petg_0.2mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.8_um-petg_0.2mm_quick.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.8_um-petg_0.2mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.8_um-pla_0.2mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.8_um-pla_0.2mm_quick.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.8_um-pla_0.2mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s3_cc0.4_petcf_0.15mm_annealing.inst.cfg
|
8e8e64f37b
Added PET-CF quality and intent profiles.
|
1 year ago |
|
um_s3_cc0.4_petcf_0.15mm_engineering.inst.cfg
|
8e8e64f37b
Added PET-CF quality and intent profiles.
|
1 year ago |
|
um_s3_cc0.4_petcf_0.2mm_annealing.inst.cfg
|
8e8e64f37b
Added PET-CF quality and intent profiles.
|
1 year ago |
|
um_s3_cc0.4_petcf_0.2mm_engineering.inst.cfg
|
8e8e64f37b
Added PET-CF quality and intent profiles.
|
1 year ago |
|
um_s3_cc0.6_petcf_0.15mm_annealing.inst.cfg
|
8e8e64f37b
Added PET-CF quality and intent profiles.
|
1 year ago |
|
um_s3_cc0.6_petcf_0.15mm_engineering.inst.cfg
|
8e8e64f37b
Added PET-CF quality and intent profiles.
|
1 year ago |
|
um_s3_cc0.6_petcf_0.2mm_annealing.inst.cfg
|
8e8e64f37b
Added PET-CF quality and intent profiles.
|
1 year ago |
|
um_s3_cc0.6_petcf_0.2mm_engineering.inst.cfg
|
8e8e64f37b
Added PET-CF quality and intent profiles.
|
1 year ago |
Paul Kuiper