um3_aa0.4_TPU_Normal_Quality.inst.cfg 1.3 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849
  1. [general]
  2. definition = ultimaker3
  3. name = Fine
  4. version = 4
  5. [metadata]
  6. material = generic_tpu
  7. quality_type = normal
  8. setting_version = 22
  9. type = quality
  10. variant = AA 0.4
  11. weight = 0
  12. [values]
  13. brim_width = 8.75
  14. gradual_infill_step_height = =5 * layer_height
  15. infill_overlap = 0
  16. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
  17. infill_sparse_density = 10
  18. infill_wipe_dist = 0.1
  19. machine_min_cool_heat_time_window = 15
  20. machine_nozzle_cool_down_speed = 0.5
  21. machine_nozzle_heat_up_speed = 2.5
  22. material_final_print_temperature = =material_print_temperature - 10
  23. material_flow = 106
  24. material_initial_print_temperature = =material_print_temperature - 10
  25. multiple_mesh_overlap = 0
  26. prime_tower_wipe_enabled = True
  27. retraction_count_max = 15
  28. retraction_extra_prime_amount = 0.8
  29. retraction_hop = 1.5
  30. retraction_hop_only_when_collides = True
  31. retraction_min_travel = =line_width * 2
  32. retraction_prime_speed = 15
  33. skin_line_width = =round(line_width / 0.8, 2)
  34. skin_overlap = 5
  35. speed_print = 25
  36. speed_topbottom = =math.ceil(speed_print * 0.8)
  37. speed_travel = 300
  38. speed_wall = =math.ceil(speed_print * 25 / 25)
  39. speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
  40. support_angle = 50
  41. switch_extruder_prime_speed = 15
  42. switch_extruder_retraction_amount = 20
  43. switch_extruder_retraction_speeds = 35
  44. top_bottom_thickness = 0.7
  45. travel_avoid_distance = 1.5
  46. wall_0_inset = 0