fdmprinter.def.json.pot 205 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134213521362137213821392140214121422143214421452146214721482149215021512152215321542155215621572158215921602161216221632164216521662167216821692170217121722173217421752176217721782179218021812182218321842185218621872188218921902191219221932194219521962197219821992200220122022203220422052206220722082209221022112212221322142215221622172218221922202221222222232224222522262227222822292230223122322233223422352236223722382239224022412242224322442245224622472248224922502251225222532254225522562257225822592260226122622263226422652266226722682269227022712272227322742275227622772278227922802281228222832284228522862287228822892290229122922293229422952296229722982299230023012302230323042305230623072308230923102311231223132314231523162317231823192320232123222323232423252326232723282329233023312332233323342335233623372338233923402341234223432344234523462347234823492350235123522353235423552356235723582359236023612362236323642365236623672368236923702371237223732374237523762377237823792380238123822383238423852386238723882389239023912392239323942395239623972398239924002401240224032404240524062407240824092410241124122413241424152416241724182419242024212422242324242425242624272428242924302431243224332434243524362437243824392440244124422443244424452446244724482449245024512452245324542455245624572458245924602461246224632464246524662467246824692470247124722473247424752476247724782479248024812482248324842485248624872488248924902491249224932494249524962497249824992500250125022503250425052506250725082509251025112512251325142515251625172518251925202521252225232524252525262527252825292530253125322533253425352536253725382539254025412542254325442545254625472548254925502551255225532554255525562557255825592560256125622563256425652566256725682569257025712572257325742575257625772578257925802581258225832584258525862587258825892590259125922593259425952596259725982599260026012602260326042605260626072608260926102611261226132614261526162617261826192620262126222623262426252626262726282629263026312632263326342635263626372638263926402641264226432644264526462647264826492650265126522653265426552656265726582659266026612662266326642665266626672668266926702671267226732674267526762677267826792680268126822683268426852686268726882689269026912692269326942695269626972698269927002701270227032704270527062707270827092710271127122713271427152716271727182719272027212722272327242725272627272728272927302731273227332734273527362737273827392740274127422743274427452746274727482749275027512752275327542755275627572758275927602761276227632764276527662767276827692770277127722773277427752776277727782779278027812782278327842785278627872788278927902791279227932794279527962797279827992800280128022803280428052806280728082809281028112812281328142815281628172818281928202821282228232824282528262827282828292830283128322833283428352836283728382839284028412842284328442845284628472848284928502851285228532854285528562857285828592860286128622863286428652866286728682869287028712872287328742875287628772878287928802881288228832884288528862887288828892890289128922893289428952896289728982899290029012902290329042905290629072908290929102911291229132914291529162917291829192920292129222923292429252926292729282929293029312932293329342935293629372938293929402941294229432944294529462947294829492950295129522953295429552956295729582959296029612962296329642965296629672968296929702971297229732974297529762977297829792980298129822983298429852986298729882989299029912992299329942995299629972998299930003001300230033004300530063007300830093010301130123013301430153016301730183019302030213022302330243025302630273028302930303031303230333034303530363037303830393040304130423043304430453046304730483049305030513052305330543055305630573058305930603061306230633064306530663067306830693070307130723073307430753076307730783079308030813082308330843085308630873088308930903091309230933094309530963097309830993100310131023103310431053106310731083109311031113112311331143115311631173118311931203121312231233124312531263127312831293130313131323133313431353136313731383139314031413142314331443145314631473148314931503151315231533154315531563157315831593160316131623163316431653166316731683169317031713172317331743175317631773178317931803181318231833184318531863187318831893190319131923193319431953196319731983199320032013202320332043205320632073208320932103211321232133214321532163217321832193220322132223223322432253226322732283229323032313232323332343235323632373238323932403241324232433244324532463247324832493250325132523253325432553256325732583259326032613262326332643265326632673268326932703271327232733274327532763277327832793280328132823283328432853286328732883289329032913292329332943295329632973298329933003301330233033304330533063307330833093310331133123313331433153316331733183319332033213322332333243325332633273328332933303331333233333334333533363337333833393340334133423343334433453346334733483349335033513352335333543355335633573358335933603361336233633364336533663367336833693370337133723373337433753376337733783379338033813382338333843385338633873388338933903391339233933394339533963397339833993400340134023403340434053406340734083409341034113412341334143415341634173418341934203421342234233424342534263427342834293430343134323433343434353436343734383439344034413442344334443445344634473448344934503451345234533454345534563457345834593460346134623463346434653466346734683469347034713472347334743475347634773478347934803481348234833484348534863487348834893490349134923493349434953496349734983499350035013502350335043505350635073508350935103511351235133514351535163517351835193520352135223523352435253526352735283529353035313532353335343535353635373538353935403541354235433544354535463547354835493550355135523553355435553556355735583559356035613562356335643565356635673568356935703571357235733574357535763577357835793580358135823583358435853586358735883589359035913592359335943595359635973598359936003601360236033604360536063607360836093610361136123613361436153616361736183619362036213622362336243625362636273628362936303631363236333634363536363637363836393640364136423643364436453646364736483649365036513652365336543655365636573658365936603661366236633664366536663667366836693670367136723673367436753676367736783679368036813682368336843685368636873688368936903691369236933694369536963697369836993700370137023703370437053706370737083709371037113712371337143715371637173718371937203721372237233724372537263727372837293730373137323733373437353736373737383739374037413742374337443745374637473748374937503751375237533754375537563757375837593760376137623763376437653766376737683769377037713772377337743775377637773778377937803781378237833784378537863787378837893790379137923793379437953796379737983799380038013802380338043805380638073808380938103811381238133814381538163817381838193820382138223823382438253826382738283829383038313832383338343835383638373838383938403841384238433844384538463847384838493850385138523853385438553856385738583859386038613862386338643865386638673868386938703871387238733874387538763877387838793880388138823883388438853886388738883889389038913892389338943895389638973898389939003901390239033904390539063907390839093910391139123913391439153916391739183919392039213922392339243925392639273928392939303931393239333934393539363937393839393940394139423943394439453946394739483949395039513952395339543955395639573958395939603961396239633964396539663967396839693970397139723973397439753976397739783979398039813982398339843985398639873988398939903991399239933994399539963997399839994000400140024003400440054006400740084009401040114012401340144015401640174018401940204021402240234024402540264027402840294030403140324033403440354036403740384039404040414042404340444045404640474048404940504051405240534054405540564057405840594060406140624063406440654066406740684069407040714072407340744075407640774078407940804081408240834084408540864087408840894090409140924093409440954096409740984099410041014102410341044105410641074108410941104111411241134114411541164117411841194120412141224123412441254126412741284129413041314132413341344135413641374138413941404141414241434144414541464147414841494150415141524153415441554156415741584159416041614162416341644165416641674168416941704171417241734174417541764177417841794180418141824183418441854186418741884189419041914192419341944195419641974198419942004201420242034204420542064207420842094210421142124213421442154216421742184219422042214222422342244225422642274228422942304231423242334234423542364237423842394240424142424243424442454246424742484249425042514252425342544255425642574258425942604261426242634264426542664267426842694270427142724273427442754276427742784279428042814282428342844285428642874288428942904291429242934294429542964297429842994300430143024303430443054306430743084309431043114312431343144315431643174318431943204321432243234324432543264327432843294330433143324333433443354336433743384339434043414342434343444345434643474348434943504351435243534354435543564357435843594360436143624363436443654366436743684369437043714372437343744375437643774378437943804381438243834384438543864387438843894390439143924393439443954396439743984399440044014402440344044405440644074408440944104411441244134414441544164417441844194420442144224423442444254426442744284429443044314432443344344435443644374438443944404441444244434444444544464447444844494450445144524453445444554456445744584459446044614462446344644465446644674468446944704471447244734474447544764477447844794480448144824483448444854486448744884489449044914492449344944495449644974498449945004501450245034504450545064507450845094510451145124513451445154516451745184519452045214522452345244525452645274528452945304531453245334534453545364537453845394540454145424543454445454546454745484549455045514552455345544555455645574558455945604561456245634564456545664567456845694570457145724573457445754576457745784579458045814582458345844585458645874588458945904591459245934594459545964597459845994600460146024603460446054606460746084609461046114612461346144615461646174618461946204621462246234624462546264627462846294630463146324633463446354636463746384639464046414642464346444645464646474648464946504651465246534654465546564657465846594660466146624663466446654666466746684669467046714672467346744675467646774678467946804681468246834684468546864687468846894690469146924693469446954696469746984699470047014702470347044705470647074708470947104711471247134714471547164717471847194720472147224723472447254726472747284729473047314732473347344735473647374738473947404741474247434744474547464747474847494750475147524753475447554756475747584759476047614762476347644765476647674768476947704771477247734774477547764777477847794780478147824783478447854786478747884789479047914792479347944795479647974798479948004801480248034804480548064807480848094810481148124813481448154816481748184819482048214822482348244825482648274828482948304831483248334834483548364837483848394840484148424843484448454846484748484849485048514852485348544855485648574858485948604861486248634864486548664867486848694870487148724873487448754876487748784879488048814882488348844885488648874888488948904891489248934894489548964897489848994900490149024903490449054906490749084909491049114912491349144915491649174918491949204921492249234924492549264927492849294930493149324933493449354936493749384939494049414942494349444945494649474948494949504951495249534954495549564957495849594960496149624963496449654966496749684969497049714972497349744975497649774978497949804981498249834984498549864987498849894990499149924993499449954996499749984999500050015002500350045005500650075008500950105011501250135014501550165017501850195020502150225023502450255026502750285029503050315032503350345035503650375038503950405041504250435044504550465047504850495050505150525053505450555056505750585059506050615062506350645065506650675068506950705071507250735074507550765077507850795080508150825083508450855086508750885089509050915092509350945095509650975098509951005101510251035104510551065107510851095110511151125113511451155116511751185119512051215122512351245125512651275128512951305131513251335134513551365137513851395140514151425143514451455146514751485149515051515152515351545155515651575158515951605161516251635164516551665167516851695170517151725173517451755176517751785179518051815182518351845185518651875188518951905191519251935194519551965197519851995200520152025203520452055206520752085209521052115212521352145215521652175218521952205221522252235224522552265227522852295230523152325233523452355236523752385239524052415242524352445245524652475248524952505251525252535254525552565257525852595260526152625263526452655266526752685269527052715272527352745275527652775278527952805281528252835284528552865287528852895290529152925293529452955296529752985299530053015302530353045305530653075308530953105311531253135314531553165317531853195320532153225323532453255326532753285329533053315332533353345335533653375338533953405341534253435344534553465347534853495350535153525353535453555356535753585359536053615362536353645365536653675368536953705371537253735374537553765377537853795380538153825383538453855386538753885389539053915392539353945395539653975398539954005401540254035404540554065407540854095410541154125413541454155416541754185419542054215422542354245425542654275428542954305431543254335434543554365437543854395440544154425443544454455446544754485449545054515452545354545455545654575458545954605461546254635464546554665467546854695470547154725473547454755476547754785479548054815482548354845485548654875488548954905491549254935494549554965497549854995500550155025503550455055506550755085509551055115512551355145515551655175518551955205521552255235524552555265527552855295530553155325533553455355536553755385539554055415542554355445545554655475548554955505551555255535554555555565557555855595560556155625563556455655566556755685569557055715572557355745575557655775578557955805581558255835584558555865587558855895590559155925593559455955596559755985599560056015602560356045605560656075608560956105611561256135614561556165617561856195620562156225623562456255626562756285629563056315632563356345635563656375638563956405641564256435644564556465647564856495650565156525653565456555656565756585659566056615662566356645665566656675668566956705671567256735674567556765677567856795680568156825683568456855686568756885689569056915692569356945695569656975698569957005701570257035704570557065707570857095710571157125713571457155716571757185719572057215722572357245725572657275728572957305731573257335734573557365737573857395740574157425743574457455746574757485749575057515752575357545755575657575758575957605761576257635764576557665767576857695770577157725773577457755776577757785779578057815782578357845785578657875788578957905791579257935794579557965797579857995800580158025803580458055806580758085809581058115812581358145815581658175818581958205821582258235824582558265827582858295830583158325833583458355836583758385839584058415842584358445845584658475848584958505851585258535854585558565857585858595860586158625863586458655866586758685869587058715872587358745875587658775878587958805881588258835884588558865887588858895890589158925893589458955896589758985899590059015902590359045905590659075908590959105911591259135914591559165917591859195920592159225923592459255926592759285929593059315932593359345935593659375938593959405941594259435944594559465947594859495950595159525953595459555956595759585959596059615962596359645965596659675968596959705971597259735974597559765977597859795980598159825983598459855986598759885989599059915992599359945995599659975998599960006001600260036004600560066007600860096010601160126013601460156016601760186019602060216022602360246025602660276028602960306031603260336034603560366037603860396040604160426043604460456046604760486049605060516052605360546055605660576058605960606061606260636064606560666067606860696070607160726073607460756076607760786079608060816082608360846085608660876088608960906091609260936094609560966097609860996100610161026103610461056106610761086109611061116112611361146115611661176118611961206121612261236124612561266127612861296130613161326133613461356136613761386139614061416142614361446145614661476148614961506151615261536154615561566157615861596160616161626163616461656166616761686169617061716172617361746175617661776178617961806181618261836184618561866187618861896190619161926193619461956196619761986199620062016202620362046205620662076208620962106211621262136214621562166217621862196220622162226223622462256226622762286229623062316232623362346235623662376238623962406241624262436244624562466247624862496250625162526253625462556256625762586259626062616262626362646265626662676268626962706271627262736274627562766277627862796280628162826283628462856286628762886289629062916292629362946295629662976298629963006301630263036304630563066307630863096310631163126313631463156316631763186319632063216322632363246325632663276328632963306331633263336334633563366337633863396340634163426343634463456346634763486349635063516352635363546355635663576358635963606361636263636364636563666367636863696370637163726373637463756376637763786379638063816382638363846385638663876388638963906391639263936394639563966397639863996400640164026403640464056406640764086409641064116412641364146415641664176418641964206421642264236424642564266427642864296430643164326433643464356436643764386439644064416442644364446445644664476448644964506451645264536454645564566457645864596460646164626463646464656466646764686469647064716472647364746475647664776478647964806481648264836484648564866487648864896490649164926493649464956496649764986499650065016502650365046505650665076508650965106511651265136514651565166517651865196520652165226523652465256526652765286529653065316532653365346535653665376538653965406541654265436544654565466547654865496550655165526553655465556556655765586559656065616562656365646565656665676568656965706571657265736574657565766577657865796580658165826583658465856586658765886589659065916592659365946595659665976598659966006601660266036604660566066607660866096610661166126613661466156616661766186619662066216622662366246625662666276628662966306631663266336634663566366637663866396640664166426643664466456646664766486649665066516652665366546655665666576658665966606661666266636664666566666667666866696670667166726673667466756676667766786679668066816682668366846685668666876688668966906691669266936694669566966697669866996700670167026703670467056706670767086709671067116712671367146715671667176718671967206721672267236724672567266727672867296730673167326733673467356736673767386739674067416742674367446745674667476748
  1. #, fuzzy
  2. msgid ""
  3. msgstr ""
  4. "Project-Id-Version: Uranium json setting files\n"
  5. "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
  6. "POT-Creation-Date: 2023-01-31 17:40+0000\n"
  7. "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
  8. "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
  9. "Language-Team: LANGUAGE\n"
  10. "MIME-Version: 1.0\n"
  11. "Content-Type: text/plain; charset=UTF-8\n"
  12. "Content-Transfer-Encoding: 8bit\n"
  13. #: fdmprinter.def.json
  14. msgctxt "machine_settings label"
  15. msgid "Machine"
  16. msgstr ""
  17. #: fdmprinter.def.json
  18. msgctxt "machine_settings description"
  19. msgid "Machine specific settings"
  20. msgstr ""
  21. #: fdmprinter.def.json
  22. msgctxt "machine_name label"
  23. msgid "Machine Type"
  24. msgstr ""
  25. #: fdmprinter.def.json
  26. msgctxt "machine_name description"
  27. msgid "The name of your 3D printer model."
  28. msgstr ""
  29. #: fdmprinter.def.json
  30. msgctxt "machine_show_variants label"
  31. msgid "Show Machine Variants"
  32. msgstr ""
  33. #: fdmprinter.def.json
  34. msgctxt "machine_show_variants description"
  35. msgid "Whether to show the different variants of this machine, which are described in separate json files."
  36. msgstr ""
  37. #: fdmprinter.def.json
  38. msgctxt "machine_start_gcode label"
  39. msgid "Start G-code"
  40. msgstr ""
  41. #: fdmprinter.def.json
  42. msgctxt "machine_start_gcode description"
  43. msgid "G-code commands to be executed at the very start - separated by \n."
  44. msgstr ""
  45. #: fdmprinter.def.json
  46. msgctxt "machine_end_gcode label"
  47. msgid "End G-code"
  48. msgstr ""
  49. #: fdmprinter.def.json
  50. msgctxt "machine_end_gcode description"
  51. msgid "G-code commands to be executed at the very end - separated by \n."
  52. msgstr ""
  53. #: fdmprinter.def.json
  54. msgctxt "material_guid label"
  55. msgid "Material GUID"
  56. msgstr ""
  57. #: fdmprinter.def.json
  58. msgctxt "material_guid description"
  59. msgid "GUID of the material. This is set automatically."
  60. msgstr ""
  61. #: fdmprinter.def.json
  62. msgctxt "material_diameter label"
  63. msgid "Diameter"
  64. msgstr ""
  65. #: fdmprinter.def.json
  66. msgctxt "material_diameter description"
  67. msgid "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament."
  68. msgstr ""
  69. #: fdmprinter.def.json
  70. msgctxt "material_bed_temp_wait label"
  71. msgid "Wait for Build Plate Heatup"
  72. msgstr ""
  73. #: fdmprinter.def.json
  74. msgctxt "material_bed_temp_wait description"
  75. msgid "Whether to insert a command to wait until the build plate temperature is reached at the start."
  76. msgstr ""
  77. #: fdmprinter.def.json
  78. msgctxt "material_print_temp_wait label"
  79. msgid "Wait for Nozzle Heatup"
  80. msgstr ""
  81. #: fdmprinter.def.json
  82. msgctxt "material_print_temp_wait description"
  83. msgid "Whether to wait until the nozzle temperature is reached at the start."
  84. msgstr ""
  85. #: fdmprinter.def.json
  86. msgctxt "material_print_temp_prepend label"
  87. msgid "Include Material Temperatures"
  88. msgstr ""
  89. #: fdmprinter.def.json
  90. msgctxt "material_print_temp_prepend description"
  91. msgid "Whether to include nozzle temperature commands at the start of the gcode. When the start_gcode already contains nozzle temperature commands Cura frontend will automatically disable this setting."
  92. msgstr ""
  93. #: fdmprinter.def.json
  94. msgctxt "material_bed_temp_prepend label"
  95. msgid "Include Build Plate Temperature"
  96. msgstr ""
  97. #: fdmprinter.def.json
  98. msgctxt "material_bed_temp_prepend description"
  99. msgid "Whether to include build plate temperature commands at the start of the gcode. When the start_gcode already contains build plate temperature commands Cura frontend will automatically disable this setting."
  100. msgstr ""
  101. #: fdmprinter.def.json
  102. msgctxt "machine_width label"
  103. msgid "Machine Width"
  104. msgstr ""
  105. #: fdmprinter.def.json
  106. msgctxt "machine_width description"
  107. msgid "The width (X-direction) of the printable area."
  108. msgstr ""
  109. #: fdmprinter.def.json
  110. msgctxt "machine_depth label"
  111. msgid "Machine Depth"
  112. msgstr ""
  113. #: fdmprinter.def.json
  114. msgctxt "machine_depth description"
  115. msgid "The depth (Y-direction) of the printable area."
  116. msgstr ""
  117. #: fdmprinter.def.json
  118. msgctxt "machine_height label"
  119. msgid "Machine Height"
  120. msgstr ""
  121. #: fdmprinter.def.json
  122. msgctxt "machine_height description"
  123. msgid "The height (Z-direction) of the printable area."
  124. msgstr ""
  125. #: fdmprinter.def.json
  126. msgctxt "machine_shape label"
  127. msgid "Build Plate Shape"
  128. msgstr ""
  129. #: fdmprinter.def.json
  130. msgctxt "machine_shape description"
  131. msgid "The shape of the build plate without taking unprintable areas into account."
  132. msgstr ""
  133. #: fdmprinter.def.json
  134. msgctxt "machine_shape option rectangular"
  135. msgid "Rectangular"
  136. msgstr ""
  137. #: fdmprinter.def.json
  138. msgctxt "machine_shape option elliptic"
  139. msgid "Elliptic"
  140. msgstr ""
  141. #: fdmprinter.def.json
  142. msgctxt "machine_buildplate_type label"
  143. msgid "Build Plate Material"
  144. msgstr ""
  145. #: fdmprinter.def.json
  146. msgctxt "machine_buildplate_type description"
  147. msgid "The material of the build plate installed on the printer."
  148. msgstr ""
  149. #: fdmprinter.def.json
  150. msgctxt "machine_buildplate_type option glass"
  151. msgid "Glass"
  152. msgstr ""
  153. #: fdmprinter.def.json
  154. msgctxt "machine_buildplate_type option aluminum"
  155. msgid "Aluminum"
  156. msgstr ""
  157. #: fdmprinter.def.json
  158. msgctxt "machine_heated_bed label"
  159. msgid "Has Heated Build Plate"
  160. msgstr ""
  161. #: fdmprinter.def.json
  162. msgctxt "machine_heated_bed description"
  163. msgid "Whether the machine has a heated build plate present."
  164. msgstr ""
  165. #: fdmprinter.def.json
  166. msgctxt "machine_heated_build_volume label"
  167. msgid "Has Build Volume Temperature Stabilization"
  168. msgstr ""
  169. #: fdmprinter.def.json
  170. msgctxt "machine_heated_build_volume description"
  171. msgid "Whether the machine is able to stabilize the build volume temperature."
  172. msgstr ""
  173. #: fdmprinter.def.json
  174. msgctxt "machine_always_write_active_tool label"
  175. msgid "Always Write Active Tool"
  176. msgstr ""
  177. #: fdmprinter.def.json
  178. msgctxt "machine_always_write_active_tool description"
  179. msgid "Write active tool after sending temp commands to inactive tool. Required for Dual Extruder printing with Smoothie or other firmware with modal tool commands."
  180. msgstr ""
  181. #: fdmprinter.def.json
  182. msgctxt "machine_center_is_zero label"
  183. msgid "Is Center Origin"
  184. msgstr ""
  185. #: fdmprinter.def.json
  186. msgctxt "machine_center_is_zero description"
  187. msgid "Whether the X/Y coordinates of the zero position of the printer is at the center of the printable area."
  188. msgstr ""
  189. #: fdmprinter.def.json
  190. msgctxt "machine_extruder_count label"
  191. msgid "Number of Extruders"
  192. msgstr ""
  193. #: fdmprinter.def.json
  194. msgctxt "machine_extruder_count description"
  195. msgid "Number of extruder trains. An extruder train is the combination of a feeder, bowden tube, and nozzle."
  196. msgstr ""
  197. #: fdmprinter.def.json
  198. msgctxt "extruders_enabled_count label"
  199. msgid "Number of Extruders That Are Enabled"
  200. msgstr ""
  201. #: fdmprinter.def.json
  202. msgctxt "extruders_enabled_count description"
  203. msgid "Number of extruder trains that are enabled; automatically set in software"
  204. msgstr ""
  205. #: fdmprinter.def.json
  206. msgctxt "machine_nozzle_tip_outer_diameter label"
  207. msgid "Outer Nozzle Diameter"
  208. msgstr ""
  209. #: fdmprinter.def.json
  210. msgctxt "machine_nozzle_tip_outer_diameter description"
  211. msgid "The outer diameter of the tip of the nozzle."
  212. msgstr ""
  213. #: fdmprinter.def.json
  214. msgctxt "machine_nozzle_head_distance label"
  215. msgid "Nozzle Length"
  216. msgstr ""
  217. #: fdmprinter.def.json
  218. msgctxt "machine_nozzle_head_distance description"
  219. msgid "The height difference between the tip of the nozzle and the lowest part of the print head."
  220. msgstr ""
  221. #: fdmprinter.def.json
  222. msgctxt "machine_nozzle_expansion_angle label"
  223. msgid "Nozzle Angle"
  224. msgstr ""
  225. #: fdmprinter.def.json
  226. msgctxt "machine_nozzle_expansion_angle description"
  227. msgid "The angle between the horizontal plane and the conical part right above the tip of the nozzle."
  228. msgstr ""
  229. #: fdmprinter.def.json
  230. msgctxt "machine_heat_zone_length label"
  231. msgid "Heat Zone Length"
  232. msgstr ""
  233. #: fdmprinter.def.json
  234. msgctxt "machine_heat_zone_length description"
  235. msgid "The distance from the tip of the nozzle in which heat from the nozzle is transferred to the filament."
  236. msgstr ""
  237. #: fdmprinter.def.json
  238. msgctxt "machine_nozzle_temp_enabled label"
  239. msgid "Enable Nozzle Temperature Control"
  240. msgstr ""
  241. #: fdmprinter.def.json
  242. msgctxt "machine_nozzle_temp_enabled description"
  243. msgid "Whether to control temperature from Cura. Turn this off to control nozzle temperature from outside of Cura."
  244. msgstr ""
  245. #: fdmprinter.def.json
  246. msgctxt "machine_nozzle_heat_up_speed label"
  247. msgid "Heat Up Speed"
  248. msgstr ""
  249. #: fdmprinter.def.json
  250. msgctxt "machine_nozzle_heat_up_speed description"
  251. msgid "The speed (°C/s) by which the nozzle heats up averaged over the window of normal printing temperatures and the standby temperature."
  252. msgstr ""
  253. #: fdmprinter.def.json
  254. msgctxt "machine_nozzle_cool_down_speed label"
  255. msgid "Cool Down Speed"
  256. msgstr ""
  257. #: fdmprinter.def.json
  258. msgctxt "machine_nozzle_cool_down_speed description"
  259. msgid "The speed (°C/s) by which the nozzle cools down averaged over the window of normal printing temperatures and the standby temperature."
  260. msgstr ""
  261. #: fdmprinter.def.json
  262. msgctxt "machine_min_cool_heat_time_window label"
  263. msgid "Minimal Time Standby Temperature"
  264. msgstr ""
  265. #: fdmprinter.def.json
  266. msgctxt "machine_min_cool_heat_time_window description"
  267. msgid "The minimal time an extruder has to be inactive before the nozzle is cooled. Only when an extruder is not used for longer than this time will it be allowed to cool down to the standby temperature."
  268. msgstr ""
  269. #: fdmprinter.def.json
  270. msgctxt "machine_gcode_flavor label"
  271. msgid "G-code Flavor"
  272. msgstr ""
  273. #: fdmprinter.def.json
  274. msgctxt "machine_gcode_flavor description"
  275. msgid "The type of g-code to be generated."
  276. msgstr ""
  277. #: fdmprinter.def.json
  278. msgctxt "machine_gcode_flavor option RepRap (Marlin/Sprinter)"
  279. msgid "Marlin"
  280. msgstr ""
  281. #: fdmprinter.def.json
  282. msgctxt "machine_gcode_flavor option RepRap (Volumetric)"
  283. msgid "Marlin (Volumetric)"
  284. msgstr ""
  285. #: fdmprinter.def.json
  286. msgctxt "machine_gcode_flavor option RepRap (RepRap)"
  287. msgid "RepRap"
  288. msgstr ""
  289. #: fdmprinter.def.json
  290. msgctxt "machine_gcode_flavor option UltiGCode"
  291. msgid "Ultimaker 2"
  292. msgstr ""
  293. #: fdmprinter.def.json
  294. msgctxt "machine_gcode_flavor option Griffin"
  295. msgid "Griffin"
  296. msgstr ""
  297. #: fdmprinter.def.json
  298. msgctxt "machine_gcode_flavor option Makerbot"
  299. msgid "Makerbot"
  300. msgstr ""
  301. #: fdmprinter.def.json
  302. msgctxt "machine_gcode_flavor option BFB"
  303. msgid "Bits from Bytes"
  304. msgstr ""
  305. #: fdmprinter.def.json
  306. msgctxt "machine_gcode_flavor option MACH3"
  307. msgid "Mach3"
  308. msgstr ""
  309. #: fdmprinter.def.json
  310. msgctxt "machine_gcode_flavor option Repetier"
  311. msgid "Repetier"
  312. msgstr ""
  313. #: fdmprinter.def.json
  314. msgctxt "machine_firmware_retract label"
  315. msgid "Firmware Retraction"
  316. msgstr ""
  317. #: fdmprinter.def.json
  318. msgctxt "machine_firmware_retract description"
  319. msgid "Whether to use firmware retract commands (G10/G11) instead of using the E property in G1 commands to retract the material."
  320. msgstr ""
  321. #: fdmprinter.def.json
  322. msgctxt "machine_extruders_share_heater label"
  323. msgid "Extruders Share Heater"
  324. msgstr ""
  325. #: fdmprinter.def.json
  326. msgctxt "machine_extruders_share_heater description"
  327. msgid "Whether the extruders share a single heater rather than each extruder having its own heater."
  328. msgstr ""
  329. #: fdmprinter.def.json
  330. msgctxt "machine_extruders_share_nozzle label"
  331. msgid "Extruders Share Nozzle"
  332. msgstr ""
  333. #: fdmprinter.def.json
  334. msgctxt "machine_extruders_share_nozzle description"
  335. msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
  336. msgstr ""
  337. #: fdmprinter.def.json
  338. msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
  339. msgid "Shared Nozzle Initial Retraction"
  340. msgstr ""
  341. #: fdmprinter.def.json
  342. msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
  343. msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
  344. msgstr ""
  345. #: fdmprinter.def.json
  346. msgctxt "machine_disallowed_areas label"
  347. msgid "Disallowed Areas"
  348. msgstr ""
  349. #: fdmprinter.def.json
  350. msgctxt "machine_disallowed_areas description"
  351. msgid "A list of polygons with areas the print head is not allowed to enter."
  352. msgstr ""
  353. #: fdmprinter.def.json
  354. msgctxt "nozzle_disallowed_areas label"
  355. msgid "Nozzle Disallowed Areas"
  356. msgstr ""
  357. #: fdmprinter.def.json
  358. msgctxt "nozzle_disallowed_areas description"
  359. msgid "A list of polygons with areas the nozzle is not allowed to enter."
  360. msgstr ""
  361. #: fdmprinter.def.json
  362. msgctxt "machine_head_with_fans_polygon label"
  363. msgid "Machine Head & Fan Polygon"
  364. msgstr ""
  365. #: fdmprinter.def.json
  366. msgctxt "machine_head_with_fans_polygon description"
  367. msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
  368. msgstr ""
  369. #: fdmprinter.def.json
  370. msgctxt "gantry_height label"
  371. msgid "Gantry Height"
  372. msgstr ""
  373. #: fdmprinter.def.json
  374. msgctxt "gantry_height description"
  375. msgid "The height difference between the tip of the nozzle and the gantry system (X and Y axes)."
  376. msgstr ""
  377. #: fdmprinter.def.json
  378. msgctxt "machine_nozzle_id label"
  379. msgid "Nozzle ID"
  380. msgstr ""
  381. #: fdmprinter.def.json
  382. msgctxt "machine_nozzle_id description"
  383. msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
  384. msgstr ""
  385. #: fdmprinter.def.json
  386. msgctxt "machine_nozzle_size label"
  387. msgid "Nozzle Diameter"
  388. msgstr ""
  389. #: fdmprinter.def.json
  390. msgctxt "machine_nozzle_size description"
  391. msgid "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size."
  392. msgstr ""
  393. #: fdmprinter.def.json
  394. msgctxt "machine_use_extruder_offset_to_offset_coords label"
  395. msgid "Offset with Extruder"
  396. msgstr ""
  397. #: fdmprinter.def.json
  398. msgctxt "machine_use_extruder_offset_to_offset_coords description"
  399. msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
  400. msgstr ""
  401. #: fdmprinter.def.json
  402. msgctxt "extruder_prime_pos_z label"
  403. msgid "Extruder Prime Z Position"
  404. msgstr ""
  405. #: fdmprinter.def.json
  406. msgctxt "extruder_prime_pos_z description"
  407. msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
  408. msgstr ""
  409. #: fdmprinter.def.json
  410. msgctxt "extruder_prime_pos_abs label"
  411. msgid "Absolute Extruder Prime Position"
  412. msgstr ""
  413. #: fdmprinter.def.json
  414. msgctxt "extruder_prime_pos_abs description"
  415. msgid "Make the extruder prime position absolute rather than relative to the last-known location of the head."
  416. msgstr ""
  417. #: fdmprinter.def.json
  418. msgctxt "machine_max_feedrate_x label"
  419. msgid "Maximum Speed X"
  420. msgstr ""
  421. #: fdmprinter.def.json
  422. msgctxt "machine_max_feedrate_x description"
  423. msgid "The maximum speed for the motor of the X-direction."
  424. msgstr ""
  425. #: fdmprinter.def.json
  426. msgctxt "machine_max_feedrate_y label"
  427. msgid "Maximum Speed Y"
  428. msgstr ""
  429. #: fdmprinter.def.json
  430. msgctxt "machine_max_feedrate_y description"
  431. msgid "The maximum speed for the motor of the Y-direction."
  432. msgstr ""
  433. #: fdmprinter.def.json
  434. msgctxt "machine_max_feedrate_z label"
  435. msgid "Maximum Speed Z"
  436. msgstr ""
  437. #: fdmprinter.def.json
  438. msgctxt "machine_max_feedrate_z description"
  439. msgid "The maximum speed for the motor of the Z-direction."
  440. msgstr ""
  441. #: fdmprinter.def.json
  442. msgctxt "machine_max_feedrate_e label"
  443. msgid "Maximum Speed E"
  444. msgstr ""
  445. #: fdmprinter.def.json
  446. msgctxt "machine_max_feedrate_e description"
  447. msgid "The maximum speed of the filament."
  448. msgstr ""
  449. #: fdmprinter.def.json
  450. msgctxt "machine_max_acceleration_x label"
  451. msgid "Maximum Acceleration X"
  452. msgstr ""
  453. #: fdmprinter.def.json
  454. msgctxt "machine_max_acceleration_x description"
  455. msgid "Maximum acceleration for the motor of the X-direction"
  456. msgstr ""
  457. #: fdmprinter.def.json
  458. msgctxt "machine_max_acceleration_y label"
  459. msgid "Maximum Acceleration Y"
  460. msgstr ""
  461. #: fdmprinter.def.json
  462. msgctxt "machine_max_acceleration_y description"
  463. msgid "Maximum acceleration for the motor of the Y-direction."
  464. msgstr ""
  465. #: fdmprinter.def.json
  466. msgctxt "machine_max_acceleration_z label"
  467. msgid "Maximum Acceleration Z"
  468. msgstr ""
  469. #: fdmprinter.def.json
  470. msgctxt "machine_max_acceleration_z description"
  471. msgid "Maximum acceleration for the motor of the Z-direction."
  472. msgstr ""
  473. #: fdmprinter.def.json
  474. msgctxt "machine_max_acceleration_e label"
  475. msgid "Maximum Filament Acceleration"
  476. msgstr ""
  477. #: fdmprinter.def.json
  478. msgctxt "machine_max_acceleration_e description"
  479. msgid "Maximum acceleration for the motor of the filament."
  480. msgstr ""
  481. #: fdmprinter.def.json
  482. msgctxt "machine_acceleration label"
  483. msgid "Default Acceleration"
  484. msgstr ""
  485. #: fdmprinter.def.json
  486. msgctxt "machine_acceleration description"
  487. msgid "The default acceleration of print head movement."
  488. msgstr ""
  489. #: fdmprinter.def.json
  490. msgctxt "machine_max_jerk_xy label"
  491. msgid "Default X-Y Jerk"
  492. msgstr ""
  493. #: fdmprinter.def.json
  494. msgctxt "machine_max_jerk_xy description"
  495. msgid "Default jerk for movement in the horizontal plane."
  496. msgstr ""
  497. #: fdmprinter.def.json
  498. msgctxt "machine_max_jerk_z label"
  499. msgid "Default Z Jerk"
  500. msgstr ""
  501. #: fdmprinter.def.json
  502. msgctxt "machine_max_jerk_z description"
  503. msgid "Default jerk for the motor of the Z-direction."
  504. msgstr ""
  505. #: fdmprinter.def.json
  506. msgctxt "machine_max_jerk_e label"
  507. msgid "Default Filament Jerk"
  508. msgstr ""
  509. #: fdmprinter.def.json
  510. msgctxt "machine_max_jerk_e description"
  511. msgid "Default jerk for the motor of the filament."
  512. msgstr ""
  513. #: fdmprinter.def.json
  514. msgctxt "machine_steps_per_mm_x label"
  515. msgid "Steps per Millimeter (X)"
  516. msgstr ""
  517. #: fdmprinter.def.json
  518. msgctxt "machine_steps_per_mm_x description"
  519. msgid "How many steps of the stepper motor will result in one millimeter of movement in the X direction."
  520. msgstr ""
  521. #: fdmprinter.def.json
  522. msgctxt "machine_steps_per_mm_y label"
  523. msgid "Steps per Millimeter (Y)"
  524. msgstr ""
  525. #: fdmprinter.def.json
  526. msgctxt "machine_steps_per_mm_y description"
  527. msgid "How many steps of the stepper motor will result in one millimeter of movement in the Y direction."
  528. msgstr ""
  529. #: fdmprinter.def.json
  530. msgctxt "machine_steps_per_mm_z label"
  531. msgid "Steps per Millimeter (Z)"
  532. msgstr ""
  533. #: fdmprinter.def.json
  534. msgctxt "machine_steps_per_mm_z description"
  535. msgid "How many steps of the stepper motor will result in one millimeter of movement in the Z direction."
  536. msgstr ""
  537. #: fdmprinter.def.json
  538. msgctxt "machine_steps_per_mm_e label"
  539. msgid "Steps per Millimeter (E)"
  540. msgstr ""
  541. #: fdmprinter.def.json
  542. msgctxt "machine_steps_per_mm_e description"
  543. msgid "How many steps of the stepper motors will result in moving the feeder wheel by one millimeter around its circumference."
  544. msgstr ""
  545. #: fdmprinter.def.json
  546. msgctxt "machine_endstop_positive_direction_x label"
  547. msgid "X Endstop in Positive Direction"
  548. msgstr ""
  549. #: fdmprinter.def.json
  550. msgctxt "machine_endstop_positive_direction_x description"
  551. msgid "Whether the endstop of the X axis is in the positive direction (high X coordinate) or negative (low X coordinate)."
  552. msgstr ""
  553. #: fdmprinter.def.json
  554. msgctxt "machine_endstop_positive_direction_y label"
  555. msgid "Y Endstop in Positive Direction"
  556. msgstr ""
  557. #: fdmprinter.def.json
  558. msgctxt "machine_endstop_positive_direction_y description"
  559. msgid "Whether the endstop of the Y axis is in the positive direction (high Y coordinate) or negative (low Y coordinate)."
  560. msgstr ""
  561. #: fdmprinter.def.json
  562. msgctxt "machine_endstop_positive_direction_z label"
  563. msgid "Z Endstop in Positive Direction"
  564. msgstr ""
  565. #: fdmprinter.def.json
  566. msgctxt "machine_endstop_positive_direction_z description"
  567. msgid "Whether the endstop of the Z axis is in the positive direction (high Z coordinate) or negative (low Z coordinate)."
  568. msgstr ""
  569. #: fdmprinter.def.json
  570. msgctxt "machine_minimum_feedrate label"
  571. msgid "Minimum Feedrate"
  572. msgstr ""
  573. #: fdmprinter.def.json
  574. msgctxt "machine_minimum_feedrate description"
  575. msgid "The minimal movement speed of the print head."
  576. msgstr ""
  577. #: fdmprinter.def.json
  578. msgctxt "machine_feeder_wheel_diameter label"
  579. msgid "Feeder Wheel Diameter"
  580. msgstr ""
  581. #: fdmprinter.def.json
  582. msgctxt "machine_feeder_wheel_diameter description"
  583. msgid "The diameter of the wheel that drives the material in the feeder."
  584. msgstr ""
  585. #: fdmprinter.def.json
  586. msgctxt "machine_scale_fan_speed_zero_to_one label"
  587. msgid "Scale Fan Speed To 0-1"
  588. msgstr ""
  589. #: fdmprinter.def.json
  590. msgctxt "machine_scale_fan_speed_zero_to_one description"
  591. msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
  592. msgstr ""
  593. #: fdmprinter.def.json
  594. msgctxt "resolution label"
  595. msgid "Quality"
  596. msgstr ""
  597. #: fdmprinter.def.json
  598. msgctxt "resolution description"
  599. msgid "All settings that influence the resolution of the print. These settings have a large impact on the quality (and print time)"
  600. msgstr ""
  601. #: fdmprinter.def.json
  602. msgctxt "layer_height label"
  603. msgid "Layer Height"
  604. msgstr ""
  605. #: fdmprinter.def.json
  606. msgctxt "layer_height description"
  607. msgid "The height of each layer in mm. Higher values produce faster prints in lower resolution, lower values produce slower prints in higher resolution."
  608. msgstr ""
  609. #: fdmprinter.def.json
  610. msgctxt "layer_height_0 label"
  611. msgid "Initial Layer Height"
  612. msgstr ""
  613. #: fdmprinter.def.json
  614. msgctxt "layer_height_0 description"
  615. msgid "The height of the initial layer in mm. A thicker initial layer makes adhesion to the build plate easier."
  616. msgstr ""
  617. #: fdmprinter.def.json
  618. msgctxt "line_width label"
  619. msgid "Line Width"
  620. msgstr ""
  621. #: fdmprinter.def.json
  622. msgctxt "line_width description"
  623. msgid "Width of a single line. Generally, the width of each line should correspond to the width of the nozzle. However, slightly reducing this value could produce better prints."
  624. msgstr ""
  625. #: fdmprinter.def.json
  626. msgctxt "wall_line_width label"
  627. msgid "Wall Line Width"
  628. msgstr ""
  629. #: fdmprinter.def.json
  630. msgctxt "wall_line_width description"
  631. msgid "Width of a single wall line."
  632. msgstr ""
  633. #: fdmprinter.def.json
  634. msgctxt "wall_line_width_0 label"
  635. msgid "Outer Wall Line Width"
  636. msgstr ""
  637. #: fdmprinter.def.json
  638. msgctxt "wall_line_width_0 description"
  639. msgid "Width of the outermost wall line. By lowering this value, higher levels of detail can be printed."
  640. msgstr ""
  641. #: fdmprinter.def.json
  642. msgctxt "wall_line_width_x label"
  643. msgid "Inner Wall(s) Line Width"
  644. msgstr ""
  645. #: fdmprinter.def.json
  646. msgctxt "wall_line_width_x description"
  647. msgid "Width of a single wall line for all wall lines except the outermost one."
  648. msgstr ""
  649. #: fdmprinter.def.json
  650. msgctxt "skin_line_width label"
  651. msgid "Top/Bottom Line Width"
  652. msgstr ""
  653. #: fdmprinter.def.json
  654. msgctxt "skin_line_width description"
  655. msgid "Width of a single top/bottom line."
  656. msgstr ""
  657. #: fdmprinter.def.json
  658. msgctxt "infill_line_width label"
  659. msgid "Infill Line Width"
  660. msgstr ""
  661. #: fdmprinter.def.json
  662. msgctxt "infill_line_width description"
  663. msgid "Width of a single infill line."
  664. msgstr ""
  665. #: fdmprinter.def.json
  666. msgctxt "skirt_brim_line_width label"
  667. msgid "Skirt/Brim Line Width"
  668. msgstr ""
  669. #: fdmprinter.def.json
  670. msgctxt "skirt_brim_line_width description"
  671. msgid "Width of a single skirt or brim line."
  672. msgstr ""
  673. #: fdmprinter.def.json
  674. msgctxt "support_line_width label"
  675. msgid "Support Line Width"
  676. msgstr ""
  677. #: fdmprinter.def.json
  678. msgctxt "support_line_width description"
  679. msgid "Width of a single support structure line."
  680. msgstr ""
  681. #: fdmprinter.def.json
  682. msgctxt "support_interface_line_width label"
  683. msgid "Support Interface Line Width"
  684. msgstr ""
  685. #: fdmprinter.def.json
  686. msgctxt "support_interface_line_width description"
  687. msgid "Width of a single line of support roof or floor."
  688. msgstr ""
  689. #: fdmprinter.def.json
  690. msgctxt "support_roof_line_width label"
  691. msgid "Support Roof Line Width"
  692. msgstr ""
  693. #: fdmprinter.def.json
  694. msgctxt "support_roof_line_width description"
  695. msgid "Width of a single support roof line."
  696. msgstr ""
  697. #: fdmprinter.def.json
  698. msgctxt "support_bottom_line_width label"
  699. msgid "Support Floor Line Width"
  700. msgstr ""
  701. #: fdmprinter.def.json
  702. msgctxt "support_bottom_line_width description"
  703. msgid "Width of a single support floor line."
  704. msgstr ""
  705. #: fdmprinter.def.json
  706. msgctxt "prime_tower_line_width label"
  707. msgid "Prime Tower Line Width"
  708. msgstr ""
  709. #: fdmprinter.def.json
  710. msgctxt "prime_tower_line_width description"
  711. msgid "Width of a single prime tower line."
  712. msgstr ""
  713. #: fdmprinter.def.json
  714. msgctxt "initial_layer_line_width_factor label"
  715. msgid "Initial Layer Line Width"
  716. msgstr ""
  717. #: fdmprinter.def.json
  718. msgctxt "initial_layer_line_width_factor description"
  719. msgid "Multiplier of the line width on the first layer. Increasing this could improve bed adhesion."
  720. msgstr ""
  721. #: fdmprinter.def.json
  722. msgctxt "shell label"
  723. msgid "Walls"
  724. msgstr ""
  725. #: fdmprinter.def.json
  726. msgctxt "shell description"
  727. msgid "Shell"
  728. msgstr ""
  729. #: fdmprinter.def.json
  730. msgctxt "wall_extruder_nr label"
  731. msgid "Wall Extruder"
  732. msgstr ""
  733. #: fdmprinter.def.json
  734. msgctxt "wall_extruder_nr description"
  735. msgid "The extruder train used for printing the walls. This is used in multi-extrusion."
  736. msgstr ""
  737. #: fdmprinter.def.json
  738. msgctxt "wall_0_extruder_nr label"
  739. msgid "Outer Wall Extruder"
  740. msgstr ""
  741. #: fdmprinter.def.json
  742. msgctxt "wall_0_extruder_nr description"
  743. msgid "The extruder train used for printing the outer wall. This is used in multi-extrusion."
  744. msgstr ""
  745. #: fdmprinter.def.json
  746. msgctxt "wall_x_extruder_nr label"
  747. msgid "Inner Wall Extruder"
  748. msgstr ""
  749. #: fdmprinter.def.json
  750. msgctxt "wall_x_extruder_nr description"
  751. msgid "The extruder train used for printing the inner walls. This is used in multi-extrusion."
  752. msgstr ""
  753. #: fdmprinter.def.json
  754. msgctxt "wall_thickness label"
  755. msgid "Wall Thickness"
  756. msgstr ""
  757. #: fdmprinter.def.json
  758. msgctxt "wall_thickness description"
  759. msgid "The thickness of the walls in the horizontal direction. This value divided by the wall line width defines the number of walls."
  760. msgstr ""
  761. #: fdmprinter.def.json
  762. msgctxt "wall_line_count label"
  763. msgid "Wall Line Count"
  764. msgstr ""
  765. #: fdmprinter.def.json
  766. msgctxt "wall_line_count description"
  767. msgid "The number of walls. When calculated by the wall thickness, this value is rounded to a whole number."
  768. msgstr ""
  769. #: fdmprinter.def.json
  770. msgctxt "wall_transition_length label"
  771. msgid "Wall Transition Length"
  772. msgstr ""
  773. #: fdmprinter.def.json
  774. msgctxt "wall_transition_length description"
  775. msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
  776. msgstr ""
  777. #: fdmprinter.def.json
  778. msgctxt "wall_distribution_count label"
  779. msgid "Wall Distribution Count"
  780. msgstr ""
  781. #: fdmprinter.def.json
  782. msgctxt "wall_distribution_count description"
  783. msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
  784. msgstr ""
  785. #: fdmprinter.def.json
  786. msgctxt "wall_transition_angle label"
  787. msgid "Wall Transitioning Threshold Angle"
  788. msgstr ""
  789. #: fdmprinter.def.json
  790. msgctxt "wall_transition_angle description"
  791. msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
  792. msgstr ""
  793. #: fdmprinter.def.json
  794. msgctxt "wall_transition_filter_distance label"
  795. msgid "Wall Transitioning Filter Distance"
  796. msgstr ""
  797. #: fdmprinter.def.json
  798. msgctxt "wall_transition_filter_distance description"
  799. msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
  800. msgstr ""
  801. #: fdmprinter.def.json
  802. msgctxt "wall_transition_filter_deviation label"
  803. msgid "Wall Transitioning Filter Margin"
  804. msgstr ""
  805. #: fdmprinter.def.json
  806. msgctxt "wall_transition_filter_deviation description"
  807. msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
  808. msgstr ""
  809. #: fdmprinter.def.json
  810. msgctxt "wall_0_wipe_dist label"
  811. msgid "Outer Wall Wipe Distance"
  812. msgstr ""
  813. #: fdmprinter.def.json
  814. msgctxt "wall_0_wipe_dist description"
  815. msgid "Distance of a travel move inserted after the outer wall, to hide the Z seam better."
  816. msgstr ""
  817. #: fdmprinter.def.json
  818. msgctxt "wall_0_inset label"
  819. msgid "Outer Wall Inset"
  820. msgstr ""
  821. #: fdmprinter.def.json
  822. msgctxt "wall_0_inset description"
  823. msgid "Inset applied to the path of the outer wall. If the outer wall is smaller than the nozzle, and printed after the inner walls, use this offset to get the hole in the nozzle to overlap with the inner walls instead of the outside of the model."
  824. msgstr ""
  825. #: fdmprinter.def.json
  826. msgctxt "optimize_wall_printing_order label"
  827. msgid "Optimize Wall Printing Order"
  828. msgstr ""
  829. #: fdmprinter.def.json
  830. msgctxt "optimize_wall_printing_order description"
  831. msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization. First layer is not optimized when choosing brim as build plate adhesion type."
  832. msgstr ""
  833. #: fdmprinter.def.json
  834. msgctxt "inset_direction label"
  835. msgid "Wall Ordering"
  836. msgstr ""
  837. #: fdmprinter.def.json
  838. msgctxt "inset_direction description"
  839. msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed. When there is an uneven amount of total innner walls, the 'center last line' is always printed last."
  840. msgstr ""
  841. #: fdmprinter.def.json
  842. msgctxt "inset_direction option inside_out"
  843. msgid "Inside To Outside"
  844. msgstr ""
  845. #: fdmprinter.def.json
  846. msgctxt "inset_direction option outside_in"
  847. msgid "Outside To Inside"
  848. msgstr ""
  849. #: fdmprinter.def.json
  850. msgctxt "alternate_extra_perimeter label"
  851. msgid "Alternate Extra Wall"
  852. msgstr ""
  853. #: fdmprinter.def.json
  854. msgctxt "alternate_extra_perimeter description"
  855. msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
  856. msgstr ""
  857. #: fdmprinter.def.json
  858. msgctxt "min_wall_line_width label"
  859. msgid "Minimum Wall Line Width"
  860. msgstr ""
  861. #: fdmprinter.def.json
  862. msgctxt "min_wall_line_width description"
  863. msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
  864. msgstr ""
  865. #: fdmprinter.def.json
  866. msgctxt "min_even_wall_line_width label"
  867. msgid "Minimum Even Wall Line Width"
  868. msgstr ""
  869. #: fdmprinter.def.json
  870. msgctxt "min_even_wall_line_width description"
  871. msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
  872. msgstr ""
  873. #: fdmprinter.def.json
  874. msgctxt "min_odd_wall_line_width label"
  875. msgid "Minimum Odd Wall Line Width"
  876. msgstr ""
  877. #: fdmprinter.def.json
  878. msgctxt "min_odd_wall_line_width description"
  879. msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width."
  880. msgstr ""
  881. #: fdmprinter.def.json
  882. msgctxt "fill_outline_gaps label"
  883. msgid "Print Thin Walls"
  884. msgstr ""
  885. #: fdmprinter.def.json
  886. msgctxt "fill_outline_gaps description"
  887. msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
  888. msgstr ""
  889. #: fdmprinter.def.json
  890. msgctxt "min_feature_size label"
  891. msgid "Minimum Feature Size"
  892. msgstr ""
  893. #: fdmprinter.def.json
  894. msgctxt "min_feature_size description"
  895. msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
  896. msgstr ""
  897. #: fdmprinter.def.json
  898. msgctxt "min_bead_width label"
  899. msgid "Minimum Thin Wall Line Width"
  900. msgstr ""
  901. #: fdmprinter.def.json
  902. msgctxt "min_bead_width description"
  903. msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
  904. msgstr ""
  905. #: fdmprinter.def.json
  906. msgctxt "xy_offset label"
  907. msgid "Horizontal Expansion"
  908. msgstr ""
  909. #: fdmprinter.def.json
  910. msgctxt "xy_offset description"
  911. msgid "Amount of offset applied to all polygons in each layer. Positive values can compensate for too big holes; negative values can compensate for too small holes."
  912. msgstr ""
  913. #: fdmprinter.def.json
  914. msgctxt "xy_offset_layer_0 label"
  915. msgid "Initial Layer Horizontal Expansion"
  916. msgstr ""
  917. #: fdmprinter.def.json
  918. msgctxt "xy_offset_layer_0 description"
  919. msgid "Amount of offset applied to all polygons in the first layer. A negative value can compensate for squishing of the first layer known as \"elephant's foot\"."
  920. msgstr ""
  921. #: fdmprinter.def.json
  922. msgctxt "hole_xy_offset label"
  923. msgid "Hole Horizontal Expansion"
  924. msgstr ""
  925. #: fdmprinter.def.json
  926. msgctxt "hole_xy_offset description"
  927. msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
  928. msgstr ""
  929. #: fdmprinter.def.json
  930. msgctxt "z_seam_type label"
  931. msgid "Z Seam Alignment"
  932. msgstr ""
  933. #: fdmprinter.def.json
  934. msgctxt "z_seam_type description"
  935. msgid "Starting point of each path in a layer. When paths in consecutive layers start at the same point a vertical seam may show on the print. When aligning these near a user specified location, the seam is easiest to remove. When placed randomly the inaccuracies at the paths' start will be less noticeable. When taking the shortest path the print will be quicker."
  936. msgstr ""
  937. #: fdmprinter.def.json
  938. msgctxt "z_seam_type option back"
  939. msgid "User Specified"
  940. msgstr ""
  941. #: fdmprinter.def.json
  942. msgctxt "z_seam_type option shortest"
  943. msgid "Shortest"
  944. msgstr ""
  945. #: fdmprinter.def.json
  946. msgctxt "z_seam_type option random"
  947. msgid "Random"
  948. msgstr ""
  949. #: fdmprinter.def.json
  950. msgctxt "z_seam_type option sharpest_corner"
  951. msgid "Sharpest Corner"
  952. msgstr ""
  953. #: fdmprinter.def.json
  954. msgctxt "z_seam_position label"
  955. msgid "Z Seam Position"
  956. msgstr ""
  957. #: fdmprinter.def.json
  958. msgctxt "z_seam_position description"
  959. msgid "The position near where to start printing each part in a layer."
  960. msgstr ""
  961. #: fdmprinter.def.json
  962. msgctxt "z_seam_position option backleft"
  963. msgid "Back Left"
  964. msgstr ""
  965. #: fdmprinter.def.json
  966. msgctxt "z_seam_position option back"
  967. msgid "Back"
  968. msgstr ""
  969. #: fdmprinter.def.json
  970. msgctxt "z_seam_position option backright"
  971. msgid "Back Right"
  972. msgstr ""
  973. #: fdmprinter.def.json
  974. msgctxt "z_seam_position option right"
  975. msgid "Right"
  976. msgstr ""
  977. #: fdmprinter.def.json
  978. msgctxt "z_seam_position option frontright"
  979. msgid "Front Right"
  980. msgstr ""
  981. #: fdmprinter.def.json
  982. msgctxt "z_seam_position option front"
  983. msgid "Front"
  984. msgstr ""
  985. #: fdmprinter.def.json
  986. msgctxt "z_seam_position option frontleft"
  987. msgid "Front Left"
  988. msgstr ""
  989. #: fdmprinter.def.json
  990. msgctxt "z_seam_position option left"
  991. msgid "Left"
  992. msgstr ""
  993. #: fdmprinter.def.json
  994. msgctxt "z_seam_x label"
  995. msgid "Z Seam X"
  996. msgstr ""
  997. #: fdmprinter.def.json
  998. msgctxt "z_seam_x description"
  999. msgid "The X coordinate of the position near where to start printing each part in a layer."
  1000. msgstr ""
  1001. #: fdmprinter.def.json
  1002. msgctxt "z_seam_y label"
  1003. msgid "Z Seam Y"
  1004. msgstr ""
  1005. #: fdmprinter.def.json
  1006. msgctxt "z_seam_y description"
  1007. msgid "The Y coordinate of the position near where to start printing each part in a layer."
  1008. msgstr ""
  1009. #: fdmprinter.def.json
  1010. msgctxt "z_seam_corner label"
  1011. msgid "Seam Corner Preference"
  1012. msgstr ""
  1013. #: fdmprinter.def.json
  1014. msgctxt "z_seam_corner description"
  1015. msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner. Smart Hiding allows both inside and outside corners, but chooses inside corners more frequently, if appropriate."
  1016. msgstr ""
  1017. #: fdmprinter.def.json
  1018. msgctxt "z_seam_corner option z_seam_corner_none"
  1019. msgid "None"
  1020. msgstr ""
  1021. #: fdmprinter.def.json
  1022. msgctxt "z_seam_corner option z_seam_corner_inner"
  1023. msgid "Hide Seam"
  1024. msgstr ""
  1025. #: fdmprinter.def.json
  1026. msgctxt "z_seam_corner option z_seam_corner_outer"
  1027. msgid "Expose Seam"
  1028. msgstr ""
  1029. #: fdmprinter.def.json
  1030. msgctxt "z_seam_corner option z_seam_corner_any"
  1031. msgid "Hide or Expose Seam"
  1032. msgstr ""
  1033. #: fdmprinter.def.json
  1034. msgctxt "z_seam_corner option z_seam_corner_weighted"
  1035. msgid "Smart Hiding"
  1036. msgstr ""
  1037. #: fdmprinter.def.json
  1038. msgctxt "z_seam_relative label"
  1039. msgid "Z Seam Relative"
  1040. msgstr ""
  1041. #: fdmprinter.def.json
  1042. msgctxt "z_seam_relative description"
  1043. msgid "When enabled, the z seam coordinates are relative to each part's centre. When disabled, the coordinates define an absolute position on the build plate."
  1044. msgstr ""
  1045. #: fdmprinter.def.json
  1046. msgctxt "top_bottom label"
  1047. msgid "Top/Bottom"
  1048. msgstr ""
  1049. #: fdmprinter.def.json
  1050. msgctxt "top_bottom description"
  1051. msgid "Top/Bottom"
  1052. msgstr ""
  1053. #: fdmprinter.def.json
  1054. msgctxt "roofing_extruder_nr label"
  1055. msgid "Top Surface Skin Extruder"
  1056. msgstr ""
  1057. #: fdmprinter.def.json
  1058. msgctxt "roofing_extruder_nr description"
  1059. msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
  1060. msgstr ""
  1061. #: fdmprinter.def.json
  1062. msgctxt "roofing_layer_count label"
  1063. msgid "Top Surface Skin Layers"
  1064. msgstr ""
  1065. #: fdmprinter.def.json
  1066. msgctxt "roofing_layer_count description"
  1067. msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
  1068. msgstr ""
  1069. #: fdmprinter.def.json
  1070. msgctxt "roofing_line_width label"
  1071. msgid "Top Surface Skin Line Width"
  1072. msgstr ""
  1073. #: fdmprinter.def.json
  1074. msgctxt "roofing_line_width description"
  1075. msgid "Width of a single line of the areas at the top of the print."
  1076. msgstr ""
  1077. #: fdmprinter.def.json
  1078. msgctxt "roofing_pattern label"
  1079. msgid "Top Surface Skin Pattern"
  1080. msgstr ""
  1081. #: fdmprinter.def.json
  1082. msgctxt "roofing_pattern description"
  1083. msgid "The pattern of the top most layers."
  1084. msgstr ""
  1085. #: fdmprinter.def.json
  1086. msgctxt "roofing_pattern option lines"
  1087. msgid "Lines"
  1088. msgstr ""
  1089. #: fdmprinter.def.json
  1090. msgctxt "roofing_pattern option concentric"
  1091. msgid "Concentric"
  1092. msgstr ""
  1093. #: fdmprinter.def.json
  1094. msgctxt "roofing_pattern option zigzag"
  1095. msgid "Zig Zag"
  1096. msgstr ""
  1097. #: fdmprinter.def.json
  1098. msgctxt "roofing_monotonic label"
  1099. msgid "Monotonic Top Surface Order"
  1100. msgstr ""
  1101. #: fdmprinter.def.json
  1102. msgctxt "roofing_monotonic description"
  1103. msgid "Print top surface lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent."
  1104. msgstr ""
  1105. #: fdmprinter.def.json
  1106. msgctxt "roofing_angles label"
  1107. msgid "Top Surface Skin Line Directions"
  1108. msgstr ""
  1109. #: fdmprinter.def.json
  1110. msgctxt "roofing_angles description"
  1111. msgid "A list of integer line directions to use when the top surface skin layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
  1112. msgstr ""
  1113. #: fdmprinter.def.json
  1114. msgctxt "top_bottom_extruder_nr label"
  1115. msgid "Top/Bottom Extruder"
  1116. msgstr ""
  1117. #: fdmprinter.def.json
  1118. msgctxt "top_bottom_extruder_nr description"
  1119. msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
  1120. msgstr ""
  1121. #: fdmprinter.def.json
  1122. msgctxt "top_bottom_thickness label"
  1123. msgid "Top/Bottom Thickness"
  1124. msgstr ""
  1125. #: fdmprinter.def.json
  1126. msgctxt "top_bottom_thickness description"
  1127. msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
  1128. msgstr ""
  1129. #: fdmprinter.def.json
  1130. msgctxt "top_thickness label"
  1131. msgid "Top Thickness"
  1132. msgstr ""
  1133. #: fdmprinter.def.json
  1134. msgctxt "top_thickness description"
  1135. msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
  1136. msgstr ""
  1137. #: fdmprinter.def.json
  1138. msgctxt "top_layers label"
  1139. msgid "Top Layers"
  1140. msgstr ""
  1141. #: fdmprinter.def.json
  1142. msgctxt "top_layers description"
  1143. msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
  1144. msgstr ""
  1145. #: fdmprinter.def.json
  1146. msgctxt "bottom_thickness label"
  1147. msgid "Bottom Thickness"
  1148. msgstr ""
  1149. #: fdmprinter.def.json
  1150. msgctxt "bottom_thickness description"
  1151. msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
  1152. msgstr ""
  1153. #: fdmprinter.def.json
  1154. msgctxt "bottom_layers label"
  1155. msgid "Bottom Layers"
  1156. msgstr ""
  1157. #: fdmprinter.def.json
  1158. msgctxt "bottom_layers description"
  1159. msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
  1160. msgstr ""
  1161. #: fdmprinter.def.json
  1162. msgctxt "initial_bottom_layers label"
  1163. msgid "Initial Bottom Layers"
  1164. msgstr ""
  1165. #: fdmprinter.def.json
  1166. msgctxt "initial_bottom_layers description"
  1167. msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
  1168. msgstr ""
  1169. #: fdmprinter.def.json
  1170. msgctxt "top_bottom_pattern label"
  1171. msgid "Top/Bottom Pattern"
  1172. msgstr ""
  1173. #: fdmprinter.def.json
  1174. msgctxt "top_bottom_pattern description"
  1175. msgid "The pattern of the top/bottom layers."
  1176. msgstr ""
  1177. #: fdmprinter.def.json
  1178. msgctxt "top_bottom_pattern option lines"
  1179. msgid "Lines"
  1180. msgstr ""
  1181. #: fdmprinter.def.json
  1182. msgctxt "top_bottom_pattern option concentric"
  1183. msgid "Concentric"
  1184. msgstr ""
  1185. #: fdmprinter.def.json
  1186. msgctxt "top_bottom_pattern option zigzag"
  1187. msgid "Zig Zag"
  1188. msgstr ""
  1189. #: fdmprinter.def.json
  1190. msgctxt "top_bottom_pattern_0 label"
  1191. msgid "Bottom Pattern Initial Layer"
  1192. msgstr ""
  1193. #: fdmprinter.def.json
  1194. msgctxt "top_bottom_pattern_0 description"
  1195. msgid "The pattern on the bottom of the print on the first layer."
  1196. msgstr ""
  1197. #: fdmprinter.def.json
  1198. msgctxt "top_bottom_pattern_0 option lines"
  1199. msgid "Lines"
  1200. msgstr ""
  1201. #: fdmprinter.def.json
  1202. msgctxt "top_bottom_pattern_0 option concentric"
  1203. msgid "Concentric"
  1204. msgstr ""
  1205. #: fdmprinter.def.json
  1206. msgctxt "top_bottom_pattern_0 option zigzag"
  1207. msgid "Zig Zag"
  1208. msgstr ""
  1209. #: fdmprinter.def.json
  1210. msgctxt "connect_skin_polygons label"
  1211. msgid "Connect Top/Bottom Polygons"
  1212. msgstr ""
  1213. #: fdmprinter.def.json
  1214. msgctxt "connect_skin_polygons description"
  1215. msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
  1216. msgstr ""
  1217. #: fdmprinter.def.json
  1218. msgctxt "skin_monotonic label"
  1219. msgid "Monotonic Top/Bottom Order"
  1220. msgstr ""
  1221. #: fdmprinter.def.json
  1222. msgctxt "skin_monotonic description"
  1223. msgid "Print top/bottom lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent."
  1224. msgstr ""
  1225. #: fdmprinter.def.json
  1226. msgctxt "skin_angles label"
  1227. msgid "Top/Bottom Line Directions"
  1228. msgstr ""
  1229. #: fdmprinter.def.json
  1230. msgctxt "skin_angles description"
  1231. msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
  1232. msgstr ""
  1233. #: fdmprinter.def.json
  1234. msgctxt "skin_no_small_gaps_heuristic label"
  1235. msgid "No Skin in Z Gaps"
  1236. msgstr ""
  1237. #: fdmprinter.def.json
  1238. msgctxt "skin_no_small_gaps_heuristic description"
  1239. msgid "When the model has small vertical gaps of only a few layers, there should normally be skin around those layers in the narrow space. Enable this setting to not generate skin if the vertical gap is very small. This improves printing time and slicing time, but technically leaves infill exposed to the air."
  1240. msgstr ""
  1241. #: fdmprinter.def.json
  1242. msgctxt "skin_outline_count label"
  1243. msgid "Extra Skin Wall Count"
  1244. msgstr ""
  1245. #: fdmprinter.def.json
  1246. msgctxt "skin_outline_count description"
  1247. msgid "Replaces the outermost part of the top/bottom pattern with a number of concentric lines. Using one or two lines improves roofs that start on infill material."
  1248. msgstr ""
  1249. #: fdmprinter.def.json
  1250. msgctxt "ironing_enabled label"
  1251. msgid "Enable Ironing"
  1252. msgstr ""
  1253. #: fdmprinter.def.json
  1254. msgctxt "ironing_enabled description"
  1255. msgid "Go over the top surface one additional time, but this time extruding very little material. This is meant to melt the plastic on top further, creating a smoother surface. The pressure in the nozzle chamber is kept high so that the creases in the surface are filled with material."
  1256. msgstr ""
  1257. #: fdmprinter.def.json
  1258. msgctxt "ironing_only_highest_layer label"
  1259. msgid "Iron Only Highest Layer"
  1260. msgstr ""
  1261. #: fdmprinter.def.json
  1262. msgctxt "ironing_only_highest_layer description"
  1263. msgid "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish."
  1264. msgstr ""
  1265. #: fdmprinter.def.json
  1266. msgctxt "ironing_pattern label"
  1267. msgid "Ironing Pattern"
  1268. msgstr ""
  1269. #: fdmprinter.def.json
  1270. msgctxt "ironing_pattern description"
  1271. msgid "The pattern to use for ironing top surfaces."
  1272. msgstr ""
  1273. #: fdmprinter.def.json
  1274. msgctxt "ironing_pattern option concentric"
  1275. msgid "Concentric"
  1276. msgstr ""
  1277. #: fdmprinter.def.json
  1278. msgctxt "ironing_pattern option zigzag"
  1279. msgid "Zig Zag"
  1280. msgstr ""
  1281. #: fdmprinter.def.json
  1282. msgctxt "ironing_monotonic label"
  1283. msgid "Monotonic Ironing Order"
  1284. msgstr ""
  1285. #: fdmprinter.def.json
  1286. msgctxt "ironing_monotonic description"
  1287. msgid "Print ironing lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent."
  1288. msgstr ""
  1289. #: fdmprinter.def.json
  1290. msgctxt "ironing_line_spacing label"
  1291. msgid "Ironing Line Spacing"
  1292. msgstr ""
  1293. #: fdmprinter.def.json
  1294. msgctxt "ironing_line_spacing description"
  1295. msgid "The distance between the lines of ironing."
  1296. msgstr ""
  1297. #: fdmprinter.def.json
  1298. msgctxt "ironing_flow label"
  1299. msgid "Ironing Flow"
  1300. msgstr ""
  1301. #: fdmprinter.def.json
  1302. msgctxt "ironing_flow description"
  1303. msgid "The amount of material, relative to a normal skin line, to extrude during ironing. Keeping the nozzle filled helps filling some of the crevices of the top surface, but too much results in overextrusion and blips on the side of the surface."
  1304. msgstr ""
  1305. #: fdmprinter.def.json
  1306. msgctxt "ironing_inset label"
  1307. msgid "Ironing Inset"
  1308. msgstr ""
  1309. #: fdmprinter.def.json
  1310. msgctxt "ironing_inset description"
  1311. msgid "A distance to keep from the edges of the model. Ironing all the way to the edge of the mesh may result in a jagged edge on your print."
  1312. msgstr ""
  1313. #: fdmprinter.def.json
  1314. msgctxt "speed_ironing label"
  1315. msgid "Ironing Speed"
  1316. msgstr ""
  1317. #: fdmprinter.def.json
  1318. msgctxt "speed_ironing description"
  1319. msgid "The speed at which to pass over the top surface."
  1320. msgstr ""
  1321. #: fdmprinter.def.json
  1322. msgctxt "acceleration_ironing label"
  1323. msgid "Ironing Acceleration"
  1324. msgstr ""
  1325. #: fdmprinter.def.json
  1326. msgctxt "acceleration_ironing description"
  1327. msgid "The acceleration with which ironing is performed."
  1328. msgstr ""
  1329. #: fdmprinter.def.json
  1330. msgctxt "jerk_ironing label"
  1331. msgid "Ironing Jerk"
  1332. msgstr ""
  1333. #: fdmprinter.def.json
  1334. msgctxt "jerk_ironing description"
  1335. msgid "The maximum instantaneous velocity change while performing ironing."
  1336. msgstr ""
  1337. #: fdmprinter.def.json
  1338. msgctxt "skin_overlap label"
  1339. msgid "Skin Overlap Percentage"
  1340. msgstr ""
  1341. #: fdmprinter.def.json
  1342. msgctxt "skin_overlap description"
  1343. msgid "Adjust the amount of overlap between the walls and (the endpoints of) the skin-centerlines, as a percentage of the line widths of the skin lines and the innermost wall. A slight overlap allows the walls to connect firmly to the skin. Note that, given an equal skin and wall line-width, any percentage over 50% may already cause any skin to go past the wall, because at that point the position of the nozzle of the skin-extruder may already reach past the middle of the wall."
  1344. msgstr ""
  1345. #: fdmprinter.def.json
  1346. msgctxt "skin_overlap_mm label"
  1347. msgid "Skin Overlap"
  1348. msgstr ""
  1349. #: fdmprinter.def.json
  1350. msgctxt "skin_overlap_mm description"
  1351. msgid "Adjust the amount of overlap between the walls and (the endpoints of) the skin-centerlines. A slight overlap allows the walls to connect firmly to the skin. Note that, given an equal skin and wall line-width, any value over half the width of the wall may already cause any skin to go past the wall, because at that point the position of the nozzle of the skin-extruder may already reach past the middle of the wall."
  1352. msgstr ""
  1353. #: fdmprinter.def.json
  1354. msgctxt "skin_preshrink label"
  1355. msgid "Skin Removal Width"
  1356. msgstr ""
  1357. #: fdmprinter.def.json
  1358. msgctxt "skin_preshrink description"
  1359. msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
  1360. msgstr ""
  1361. #: fdmprinter.def.json
  1362. msgctxt "top_skin_preshrink label"
  1363. msgid "Top Skin Removal Width"
  1364. msgstr ""
  1365. #: fdmprinter.def.json
  1366. msgctxt "top_skin_preshrink description"
  1367. msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
  1368. msgstr ""
  1369. #: fdmprinter.def.json
  1370. msgctxt "bottom_skin_preshrink label"
  1371. msgid "Bottom Skin Removal Width"
  1372. msgstr ""
  1373. #: fdmprinter.def.json
  1374. msgctxt "bottom_skin_preshrink description"
  1375. msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
  1376. msgstr ""
  1377. #: fdmprinter.def.json
  1378. msgctxt "expand_skins_expand_distance label"
  1379. msgid "Skin Expand Distance"
  1380. msgstr ""
  1381. #: fdmprinter.def.json
  1382. msgctxt "expand_skins_expand_distance description"
  1383. msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
  1384. msgstr ""
  1385. #: fdmprinter.def.json
  1386. msgctxt "top_skin_expand_distance label"
  1387. msgid "Top Skin Expand Distance"
  1388. msgstr ""
  1389. #: fdmprinter.def.json
  1390. msgctxt "top_skin_expand_distance description"
  1391. msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
  1392. msgstr ""
  1393. #: fdmprinter.def.json
  1394. msgctxt "bottom_skin_expand_distance label"
  1395. msgid "Bottom Skin Expand Distance"
  1396. msgstr ""
  1397. #: fdmprinter.def.json
  1398. msgctxt "bottom_skin_expand_distance description"
  1399. msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
  1400. msgstr ""
  1401. #: fdmprinter.def.json
  1402. msgctxt "max_skin_angle_for_expansion label"
  1403. msgid "Maximum Skin Angle for Expansion"
  1404. msgstr ""
  1405. #: fdmprinter.def.json
  1406. msgctxt "max_skin_angle_for_expansion description"
  1407. msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
  1408. msgstr ""
  1409. #: fdmprinter.def.json
  1410. msgctxt "min_skin_width_for_expansion label"
  1411. msgid "Minimum Skin Width for Expansion"
  1412. msgstr ""
  1413. #: fdmprinter.def.json
  1414. msgctxt "min_skin_width_for_expansion description"
  1415. msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
  1416. msgstr ""
  1417. #: fdmprinter.def.json
  1418. msgctxt "infill label"
  1419. msgid "Infill"
  1420. msgstr ""
  1421. #: fdmprinter.def.json
  1422. msgctxt "infill description"
  1423. msgid "Infill"
  1424. msgstr ""
  1425. #: fdmprinter.def.json
  1426. msgctxt "infill_extruder_nr label"
  1427. msgid "Infill Extruder"
  1428. msgstr ""
  1429. #: fdmprinter.def.json
  1430. msgctxt "infill_extruder_nr description"
  1431. msgid "The extruder train used for printing infill. This is used in multi-extrusion."
  1432. msgstr ""
  1433. #: fdmprinter.def.json
  1434. msgctxt "infill_sparse_density label"
  1435. msgid "Infill Density"
  1436. msgstr ""
  1437. #: fdmprinter.def.json
  1438. msgctxt "infill_sparse_density description"
  1439. msgid "Adjusts the density of infill of the print."
  1440. msgstr ""
  1441. #: fdmprinter.def.json
  1442. msgctxt "infill_line_distance label"
  1443. msgid "Infill Line Distance"
  1444. msgstr ""
  1445. #: fdmprinter.def.json
  1446. msgctxt "infill_line_distance description"
  1447. msgid "Distance between the printed infill lines. This setting is calculated by the infill density and the infill line width."
  1448. msgstr ""
  1449. #: fdmprinter.def.json
  1450. msgctxt "infill_pattern label"
  1451. msgid "Infill Pattern"
  1452. msgstr ""
  1453. #: fdmprinter.def.json
  1454. msgctxt "infill_pattern description"
  1455. msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object."
  1456. msgstr ""
  1457. #: fdmprinter.def.json
  1458. msgctxt "infill_pattern option grid"
  1459. msgid "Grid"
  1460. msgstr ""
  1461. #: fdmprinter.def.json
  1462. msgctxt "infill_pattern option lines"
  1463. msgid "Lines"
  1464. msgstr ""
  1465. #: fdmprinter.def.json
  1466. msgctxt "infill_pattern option triangles"
  1467. msgid "Triangles"
  1468. msgstr ""
  1469. #: fdmprinter.def.json
  1470. msgctxt "infill_pattern option trihexagon"
  1471. msgid "Tri-Hexagon"
  1472. msgstr ""
  1473. #: fdmprinter.def.json
  1474. msgctxt "infill_pattern option cubic"
  1475. msgid "Cubic"
  1476. msgstr ""
  1477. #: fdmprinter.def.json
  1478. msgctxt "infill_pattern option cubicsubdiv"
  1479. msgid "Cubic Subdivision"
  1480. msgstr ""
  1481. #: fdmprinter.def.json
  1482. msgctxt "infill_pattern option tetrahedral"
  1483. msgid "Octet"
  1484. msgstr ""
  1485. #: fdmprinter.def.json
  1486. msgctxt "infill_pattern option quarter_cubic"
  1487. msgid "Quarter Cubic"
  1488. msgstr ""
  1489. #: fdmprinter.def.json
  1490. msgctxt "infill_pattern option concentric"
  1491. msgid "Concentric"
  1492. msgstr ""
  1493. #: fdmprinter.def.json
  1494. msgctxt "infill_pattern option zigzag"
  1495. msgid "Zig Zag"
  1496. msgstr ""
  1497. #: fdmprinter.def.json
  1498. msgctxt "infill_pattern option cross"
  1499. msgid "Cross"
  1500. msgstr ""
  1501. #: fdmprinter.def.json
  1502. msgctxt "infill_pattern option cross_3d"
  1503. msgid "Cross 3D"
  1504. msgstr ""
  1505. #: fdmprinter.def.json
  1506. msgctxt "infill_pattern option gyroid"
  1507. msgid "Gyroid"
  1508. msgstr ""
  1509. #: fdmprinter.def.json
  1510. msgctxt "infill_pattern option lightning"
  1511. msgid "Lightning"
  1512. msgstr ""
  1513. #: fdmprinter.def.json
  1514. msgctxt "zig_zaggify_infill label"
  1515. msgid "Connect Infill Lines"
  1516. msgstr ""
  1517. #: fdmprinter.def.json
  1518. msgctxt "zig_zaggify_infill description"
  1519. msgid "Connect the ends where the infill pattern meets the inner wall using a line which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduce the effects of infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used."
  1520. msgstr ""
  1521. #: fdmprinter.def.json
  1522. msgctxt "connect_infill_polygons label"
  1523. msgid "Connect Infill Polygons"
  1524. msgstr ""
  1525. #: fdmprinter.def.json
  1526. msgctxt "connect_infill_polygons description"
  1527. msgid "Connect infill paths where they run next to each other. For infill patterns which consist of several closed polygons, enabling this setting greatly reduces the travel time."
  1528. msgstr ""
  1529. #: fdmprinter.def.json
  1530. msgctxt "infill_angles label"
  1531. msgid "Infill Line Directions"
  1532. msgstr ""
  1533. #: fdmprinter.def.json
  1534. msgctxt "infill_angles description"
  1535. msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees for the lines and zig zag patterns and 45 degrees for all other patterns)."
  1536. msgstr ""
  1537. #: fdmprinter.def.json
  1538. msgctxt "infill_offset_x label"
  1539. msgid "Infill X Offset"
  1540. msgstr ""
  1541. #: fdmprinter.def.json
  1542. msgctxt "infill_offset_x description"
  1543. msgid "The infill pattern is moved this distance along the X axis."
  1544. msgstr ""
  1545. #: fdmprinter.def.json
  1546. msgctxt "infill_offset_y label"
  1547. msgid "Infill Y Offset"
  1548. msgstr ""
  1549. #: fdmprinter.def.json
  1550. msgctxt "infill_offset_y description"
  1551. msgid "The infill pattern is moved this distance along the Y axis."
  1552. msgstr ""
  1553. #: fdmprinter.def.json
  1554. msgctxt "infill_randomize_start_location label"
  1555. msgid "Randomize Infill Start"
  1556. msgstr ""
  1557. #: fdmprinter.def.json
  1558. msgctxt "infill_randomize_start_location description"
  1559. msgid "Randomize which infill line is printed first. This prevents one segment becoming the strongest, but it does so at the cost of an additional travel move."
  1560. msgstr ""
  1561. #: fdmprinter.def.json
  1562. msgctxt "infill_multiplier label"
  1563. msgid "Infill Line Multiplier"
  1564. msgstr ""
  1565. #: fdmprinter.def.json
  1566. msgctxt "infill_multiplier description"
  1567. msgid "Convert each infill line to this many lines. The extra lines do not cross over each other, but avoid each other. This makes the infill stiffer, but increases print time and material usage."
  1568. msgstr ""
  1569. #: fdmprinter.def.json
  1570. msgctxt "infill_wall_line_count label"
  1571. msgid "Extra Infill Wall Count"
  1572. msgstr ""
  1573. #: fdmprinter.def.json
  1574. msgctxt "infill_wall_line_count description"
  1575. msgid "Add extra walls around the infill area. Such walls can make top/bottom skin lines sag down less which means you need less top/bottom skin layers for the same quality at the cost of some extra material.\nThis feature can combine with the Connect Infill Polygons to connect all the infill into a single extrusion path without the need for travels or retractions if configured right."
  1576. msgstr ""
  1577. #: fdmprinter.def.json
  1578. msgctxt "sub_div_rad_add label"
  1579. msgid "Cubic Subdivision Shell"
  1580. msgstr ""
  1581. #: fdmprinter.def.json
  1582. msgctxt "sub_div_rad_add description"
  1583. msgid "An addition to the radius from the center of each cube to check for the boundary of the model, as to decide whether this cube should be subdivided. Larger values lead to a thicker shell of small cubes near the boundary of the model."
  1584. msgstr ""
  1585. #: fdmprinter.def.json
  1586. msgctxt "infill_overlap label"
  1587. msgid "Infill Overlap Percentage"
  1588. msgstr ""
  1589. #: fdmprinter.def.json
  1590. msgctxt "infill_overlap description"
  1591. msgid "The amount of overlap between the infill and the walls as a percentage of the infill line width. A slight overlap allows the walls to connect firmly to the infill."
  1592. msgstr ""
  1593. #: fdmprinter.def.json
  1594. msgctxt "infill_overlap_mm label"
  1595. msgid "Infill Overlap"
  1596. msgstr ""
  1597. #: fdmprinter.def.json
  1598. msgctxt "infill_overlap_mm description"
  1599. msgid "The amount of overlap between the infill and the walls. A slight overlap allows the walls to connect firmly to the infill."
  1600. msgstr ""
  1601. #: fdmprinter.def.json
  1602. msgctxt "infill_wipe_dist label"
  1603. msgid "Infill Wipe Distance"
  1604. msgstr ""
  1605. #: fdmprinter.def.json
  1606. msgctxt "infill_wipe_dist description"
  1607. msgid "Distance of a travel move inserted after every infill line, to make the infill stick to the walls better. This option is similar to infill overlap, but without extrusion and only on one end of the infill line."
  1608. msgstr ""
  1609. #: fdmprinter.def.json
  1610. msgctxt "infill_sparse_thickness label"
  1611. msgid "Infill Layer Thickness"
  1612. msgstr ""
  1613. #: fdmprinter.def.json
  1614. msgctxt "infill_sparse_thickness description"
  1615. msgid "The thickness per layer of infill material. This value should always be a multiple of the layer height and is otherwise rounded."
  1616. msgstr ""
  1617. #: fdmprinter.def.json
  1618. msgctxt "gradual_infill_steps label"
  1619. msgid "Gradual Infill Steps"
  1620. msgstr ""
  1621. #: fdmprinter.def.json
  1622. msgctxt "gradual_infill_steps description"
  1623. msgid "Number of times to reduce the infill density by half when getting further below top surfaces. Areas which are closer to top surfaces get a higher density, up to the Infill Density."
  1624. msgstr ""
  1625. #: fdmprinter.def.json
  1626. msgctxt "gradual_infill_step_height label"
  1627. msgid "Gradual Infill Step Height"
  1628. msgstr ""
  1629. #: fdmprinter.def.json
  1630. msgctxt "gradual_infill_step_height description"
  1631. msgid "The height of infill of a given density before switching to half the density."
  1632. msgstr ""
  1633. #: fdmprinter.def.json
  1634. msgctxt "infill_before_walls label"
  1635. msgid "Infill Before Walls"
  1636. msgstr ""
  1637. #: fdmprinter.def.json
  1638. msgctxt "infill_before_walls description"
  1639. msgid "Print the infill before printing the walls. Printing the walls first may lead to more accurate walls, but overhangs print worse. Printing the infill first leads to sturdier walls, but the infill pattern might sometimes show through the surface."
  1640. msgstr ""
  1641. #: fdmprinter.def.json
  1642. msgctxt "min_infill_area label"
  1643. msgid "Minimum Infill Area"
  1644. msgstr ""
  1645. #: fdmprinter.def.json
  1646. msgctxt "min_infill_area description"
  1647. msgid "Don't generate areas of infill smaller than this (use skin instead)."
  1648. msgstr ""
  1649. #: fdmprinter.def.json
  1650. msgctxt "infill_support_enabled label"
  1651. msgid "Infill Support"
  1652. msgstr ""
  1653. #: fdmprinter.def.json
  1654. msgctxt "infill_support_enabled description"
  1655. msgid "Print infill structures only where tops of the model should be supported. Enabling this reduces print time and material usage, but leads to ununiform object strength."
  1656. msgstr ""
  1657. #: fdmprinter.def.json
  1658. msgctxt "infill_support_angle label"
  1659. msgid "Infill Overhang Angle"
  1660. msgstr ""
  1661. #: fdmprinter.def.json
  1662. msgctxt "infill_support_angle description"
  1663. msgid "The minimum angle of internal overhangs for which infill is added. At a value of 0° objects are totally filled with infill, 90° will not provide any infill."
  1664. msgstr ""
  1665. #: fdmprinter.def.json
  1666. msgctxt "skin_edge_support_thickness label"
  1667. msgid "Skin Edge Support Thickness"
  1668. msgstr ""
  1669. #: fdmprinter.def.json
  1670. msgctxt "skin_edge_support_thickness description"
  1671. msgid "The thickness of the extra infill that supports skin edges."
  1672. msgstr ""
  1673. #: fdmprinter.def.json
  1674. msgctxt "skin_edge_support_layers label"
  1675. msgid "Skin Edge Support Layers"
  1676. msgstr ""
  1677. #: fdmprinter.def.json
  1678. msgctxt "skin_edge_support_layers description"
  1679. msgid "The number of infill layers that supports skin edges."
  1680. msgstr ""
  1681. #: fdmprinter.def.json
  1682. msgctxt "lightning_infill_support_angle label"
  1683. msgid "Lightning Infill Support Angle"
  1684. msgstr ""
  1685. #: fdmprinter.def.json
  1686. msgctxt "lightning_infill_support_angle description"
  1687. msgid "Determines when a lightning infill layer has to support anything above it. Measured in the angle given the thickness of a layer."
  1688. msgstr ""
  1689. #: fdmprinter.def.json
  1690. msgctxt "lightning_infill_overhang_angle label"
  1691. msgid "Lightning Infill Overhang Angle"
  1692. msgstr ""
  1693. #: fdmprinter.def.json
  1694. msgctxt "lightning_infill_overhang_angle description"
  1695. msgid "Determines when a lightning infill layer has to support the model above it. Measured in the angle given the thickness."
  1696. msgstr ""
  1697. #: fdmprinter.def.json
  1698. msgctxt "lightning_infill_prune_angle label"
  1699. msgid "Lightning Infill Prune Angle"
  1700. msgstr ""
  1701. #: fdmprinter.def.json
  1702. msgctxt "lightning_infill_prune_angle description"
  1703. msgid "The endpoints of infill lines are shortened to save on material. This setting is the angle of overhang of the endpoints of these lines."
  1704. msgstr ""
  1705. #: fdmprinter.def.json
  1706. msgctxt "lightning_infill_straightening_angle label"
  1707. msgid "Lightning Infill Straightening Angle"
  1708. msgstr ""
  1709. #: fdmprinter.def.json
  1710. msgctxt "lightning_infill_straightening_angle description"
  1711. msgid "The infill lines are straightened out to save on printing time. This is the maximum angle of overhang allowed across the length of the infill line."
  1712. msgstr ""
  1713. #: fdmprinter.def.json
  1714. msgctxt "material label"
  1715. msgid "Material"
  1716. msgstr ""
  1717. #: fdmprinter.def.json
  1718. msgctxt "material description"
  1719. msgid "Material"
  1720. msgstr ""
  1721. #: fdmprinter.def.json
  1722. msgctxt "default_material_print_temperature label"
  1723. msgid "Default Printing Temperature"
  1724. msgstr ""
  1725. #: fdmprinter.def.json
  1726. msgctxt "default_material_print_temperature description"
  1727. msgid "The default temperature used for printing. This should be the \"base\" temperature of a material. All other print temperatures should use offsets based on this value"
  1728. msgstr ""
  1729. #: fdmprinter.def.json
  1730. msgctxt "build_volume_temperature label"
  1731. msgid "Build Volume Temperature"
  1732. msgstr ""
  1733. #: fdmprinter.def.json
  1734. msgctxt "build_volume_temperature description"
  1735. msgid "The temperature of the environment to print in. If this is 0, the build volume temperature will not be adjusted."
  1736. msgstr ""
  1737. #: fdmprinter.def.json
  1738. msgctxt "material_print_temperature label"
  1739. msgid "Printing Temperature"
  1740. msgstr ""
  1741. #: fdmprinter.def.json
  1742. msgctxt "material_print_temperature description"
  1743. msgid "The temperature used for printing."
  1744. msgstr ""
  1745. #: fdmprinter.def.json
  1746. msgctxt "material_print_temperature_layer_0 label"
  1747. msgid "Printing Temperature Initial Layer"
  1748. msgstr ""
  1749. #: fdmprinter.def.json
  1750. msgctxt "material_print_temperature_layer_0 description"
  1751. msgid "The temperature used for printing the first layer. Set at 0 to disable special handling of the initial layer."
  1752. msgstr ""
  1753. #: fdmprinter.def.json
  1754. msgctxt "material_initial_print_temperature label"
  1755. msgid "Initial Printing Temperature"
  1756. msgstr ""
  1757. #: fdmprinter.def.json
  1758. msgctxt "material_initial_print_temperature description"
  1759. msgid "The minimal temperature while heating up to the Printing Temperature at which printing can already start."
  1760. msgstr ""
  1761. #: fdmprinter.def.json
  1762. msgctxt "material_final_print_temperature label"
  1763. msgid "Final Printing Temperature"
  1764. msgstr ""
  1765. #: fdmprinter.def.json
  1766. msgctxt "material_final_print_temperature description"
  1767. msgid "The temperature to which to already start cooling down just before the end of printing."
  1768. msgstr ""
  1769. #: fdmprinter.def.json
  1770. msgctxt "material_extrusion_cool_down_speed label"
  1771. msgid "Extrusion Cool Down Speed Modifier"
  1772. msgstr ""
  1773. #: fdmprinter.def.json
  1774. msgctxt "material_extrusion_cool_down_speed description"
  1775. msgid "The extra speed by which the nozzle cools while extruding. The same value is used to signify the heat up speed lost when heating up while extruding."
  1776. msgstr ""
  1777. #: fdmprinter.def.json
  1778. msgctxt "default_material_bed_temperature label"
  1779. msgid "Default Build Plate Temperature"
  1780. msgstr ""
  1781. #: fdmprinter.def.json
  1782. msgctxt "default_material_bed_temperature description"
  1783. msgid "The default temperature used for the heated build plate. This should be the \"base\" temperature of a build plate. All other print temperatures should use offsets based on this value"
  1784. msgstr ""
  1785. #: fdmprinter.def.json
  1786. msgctxt "material_bed_temperature label"
  1787. msgid "Build Plate Temperature"
  1788. msgstr ""
  1789. #: fdmprinter.def.json
  1790. msgctxt "material_bed_temperature description"
  1791. msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
  1792. msgstr ""
  1793. #: fdmprinter.def.json
  1794. msgctxt "material_bed_temperature_layer_0 label"
  1795. msgid "Build Plate Temperature Initial Layer"
  1796. msgstr ""
  1797. #: fdmprinter.def.json
  1798. msgctxt "material_bed_temperature_layer_0 description"
  1799. msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
  1800. msgstr ""
  1801. #: fdmprinter.def.json
  1802. msgctxt "material_adhesion_tendency label"
  1803. msgid "Adhesion Tendency"
  1804. msgstr ""
  1805. #: fdmprinter.def.json
  1806. msgctxt "material_adhesion_tendency description"
  1807. msgid "Surface adhesion tendency."
  1808. msgstr ""
  1809. #: fdmprinter.def.json
  1810. msgctxt "material_surface_energy label"
  1811. msgid "Surface Energy"
  1812. msgstr ""
  1813. #: fdmprinter.def.json
  1814. msgctxt "material_surface_energy description"
  1815. msgid "Surface energy."
  1816. msgstr ""
  1817. #: fdmprinter.def.json
  1818. msgctxt "material_shrinkage_percentage label"
  1819. msgid "Scaling Factor Shrinkage Compensation"
  1820. msgstr ""
  1821. #: fdmprinter.def.json
  1822. msgctxt "material_shrinkage_percentage description"
  1823. msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
  1824. msgstr ""
  1825. #: fdmprinter.def.json
  1826. msgctxt "material_shrinkage_percentage_xy label"
  1827. msgid "Horizontal Scaling Factor Shrinkage Compensation"
  1828. msgstr ""
  1829. #: fdmprinter.def.json
  1830. msgctxt "material_shrinkage_percentage_xy description"
  1831. msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
  1832. msgstr ""
  1833. #: fdmprinter.def.json
  1834. msgctxt "material_shrinkage_percentage_z label"
  1835. msgid "Vertical Scaling Factor Shrinkage Compensation"
  1836. msgstr ""
  1837. #: fdmprinter.def.json
  1838. msgctxt "material_shrinkage_percentage_z description"
  1839. msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
  1840. msgstr ""
  1841. #: fdmprinter.def.json
  1842. msgctxt "material_crystallinity label"
  1843. msgid "Crystalline Material"
  1844. msgstr ""
  1845. #: fdmprinter.def.json
  1846. msgctxt "material_crystallinity description"
  1847. msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?"
  1848. msgstr ""
  1849. #: fdmprinter.def.json
  1850. msgctxt "material_anti_ooze_retracted_position label"
  1851. msgid "Anti-ooze Retracted Position"
  1852. msgstr ""
  1853. #: fdmprinter.def.json
  1854. msgctxt "material_anti_ooze_retracted_position description"
  1855. msgid "How far the material needs to be retracted before it stops oozing."
  1856. msgstr ""
  1857. #: fdmprinter.def.json
  1858. msgctxt "material_anti_ooze_retraction_speed label"
  1859. msgid "Anti-ooze Retraction Speed"
  1860. msgstr ""
  1861. #: fdmprinter.def.json
  1862. msgctxt "material_anti_ooze_retraction_speed description"
  1863. msgid "How fast the material needs to be retracted during a filament switch to prevent oozing."
  1864. msgstr ""
  1865. #: fdmprinter.def.json
  1866. msgctxt "material_break_preparation_retracted_position label"
  1867. msgid "Break Preparation Retracted Position"
  1868. msgstr ""
  1869. #: fdmprinter.def.json
  1870. msgctxt "material_break_preparation_retracted_position description"
  1871. msgid "How far the filament can be stretched before it breaks, while heated."
  1872. msgstr ""
  1873. #: fdmprinter.def.json
  1874. msgctxt "material_break_preparation_speed label"
  1875. msgid "Break Preparation Retraction Speed"
  1876. msgstr ""
  1877. #: fdmprinter.def.json
  1878. msgctxt "material_break_preparation_speed description"
  1879. msgid "How fast the filament needs to be retracted just before breaking it off in a retraction."
  1880. msgstr ""
  1881. #: fdmprinter.def.json
  1882. msgctxt "material_break_preparation_temperature label"
  1883. msgid "Break Preparation Temperature"
  1884. msgstr ""
  1885. #: fdmprinter.def.json
  1886. msgctxt "material_break_preparation_temperature description"
  1887. msgid "The temperature used to purge material, should be roughly equal to the highest possible printing temperature."
  1888. msgstr ""
  1889. #: fdmprinter.def.json
  1890. msgctxt "material_break_retracted_position label"
  1891. msgid "Break Retracted Position"
  1892. msgstr ""
  1893. #: fdmprinter.def.json
  1894. msgctxt "material_break_retracted_position description"
  1895. msgid "How far to retract the filament in order to break it cleanly."
  1896. msgstr ""
  1897. #: fdmprinter.def.json
  1898. msgctxt "material_break_speed label"
  1899. msgid "Break Retraction Speed"
  1900. msgstr ""
  1901. #: fdmprinter.def.json
  1902. msgctxt "material_break_speed description"
  1903. msgid "The speed at which to retract the filament in order to break it cleanly."
  1904. msgstr ""
  1905. #: fdmprinter.def.json
  1906. msgctxt "material_break_temperature label"
  1907. msgid "Break Temperature"
  1908. msgstr ""
  1909. #: fdmprinter.def.json
  1910. msgctxt "material_break_temperature description"
  1911. msgid "The temperature at which the filament is broken for a clean break."
  1912. msgstr ""
  1913. #: fdmprinter.def.json
  1914. msgctxt "material_flush_purge_speed label"
  1915. msgid "Flush Purge Speed"
  1916. msgstr ""
  1917. #: fdmprinter.def.json
  1918. msgctxt "material_flush_purge_speed description"
  1919. msgid "How fast to prime the material after switching to a different material."
  1920. msgstr ""
  1921. #: fdmprinter.def.json
  1922. msgctxt "material_flush_purge_length label"
  1923. msgid "Flush Purge Length"
  1924. msgstr ""
  1925. #: fdmprinter.def.json
  1926. msgctxt "material_flush_purge_length description"
  1927. msgid "How much material to use to purge the previous material out of the nozzle (in length of filament) when switching to a different material."
  1928. msgstr ""
  1929. #: fdmprinter.def.json
  1930. msgctxt "material_end_of_filament_purge_speed label"
  1931. msgid "End of Filament Purge Speed"
  1932. msgstr ""
  1933. #: fdmprinter.def.json
  1934. msgctxt "material_end_of_filament_purge_speed description"
  1935. msgid "How fast to prime the material after replacing an empty spool with a fresh spool of the same material."
  1936. msgstr ""
  1937. #: fdmprinter.def.json
  1938. msgctxt "material_end_of_filament_purge_length label"
  1939. msgid "End of Filament Purge Length"
  1940. msgstr ""
  1941. #: fdmprinter.def.json
  1942. msgctxt "material_end_of_filament_purge_length description"
  1943. msgid "How much material to use to purge the previous material out of the nozzle (in length of filament) when replacing an empty spool with a fresh spool of the same material."
  1944. msgstr ""
  1945. #: fdmprinter.def.json
  1946. msgctxt "material_maximum_park_duration label"
  1947. msgid "Maximum Park Duration"
  1948. msgstr ""
  1949. #: fdmprinter.def.json
  1950. msgctxt "material_maximum_park_duration description"
  1951. msgid "How long the material can be kept out of dry storage safely."
  1952. msgstr ""
  1953. #: fdmprinter.def.json
  1954. msgctxt "material_no_load_move_factor label"
  1955. msgid "No Load Move Factor"
  1956. msgstr ""
  1957. #: fdmprinter.def.json
  1958. msgctxt "material_no_load_move_factor description"
  1959. msgid "A factor indicating how much the filament gets compressed between the feeder and the nozzle chamber, used to determine how far to move the material for a filament switch."
  1960. msgstr ""
  1961. #: fdmprinter.def.json
  1962. msgctxt "material_flow label"
  1963. msgid "Flow"
  1964. msgstr ""
  1965. #: fdmprinter.def.json
  1966. msgctxt "material_flow description"
  1967. msgid "Flow compensation: the amount of material extruded is multiplied by this value."
  1968. msgstr ""
  1969. #: fdmprinter.def.json
  1970. msgctxt "wall_material_flow label"
  1971. msgid "Wall Flow"
  1972. msgstr ""
  1973. #: fdmprinter.def.json
  1974. msgctxt "wall_material_flow description"
  1975. msgid "Flow compensation on wall lines."
  1976. msgstr ""
  1977. #: fdmprinter.def.json
  1978. msgctxt "wall_0_material_flow label"
  1979. msgid "Outer Wall Flow"
  1980. msgstr ""
  1981. #: fdmprinter.def.json
  1982. msgctxt "wall_0_material_flow description"
  1983. msgid "Flow compensation on the outermost wall line."
  1984. msgstr ""
  1985. #: fdmprinter.def.json
  1986. msgctxt "wall_x_material_flow label"
  1987. msgid "Inner Wall(s) Flow"
  1988. msgstr ""
  1989. #: fdmprinter.def.json
  1990. msgctxt "wall_x_material_flow description"
  1991. msgid "Flow compensation on wall lines for all wall lines except the outermost one."
  1992. msgstr ""
  1993. #: fdmprinter.def.json
  1994. msgctxt "skin_material_flow label"
  1995. msgid "Top/Bottom Flow"
  1996. msgstr ""
  1997. #: fdmprinter.def.json
  1998. msgctxt "skin_material_flow description"
  1999. msgid "Flow compensation on top/bottom lines."
  2000. msgstr ""
  2001. #: fdmprinter.def.json
  2002. msgctxt "roofing_material_flow label"
  2003. msgid "Top Surface Skin Flow"
  2004. msgstr ""
  2005. #: fdmprinter.def.json
  2006. msgctxt "roofing_material_flow description"
  2007. msgid "Flow compensation on lines of the areas at the top of the print."
  2008. msgstr ""
  2009. #: fdmprinter.def.json
  2010. msgctxt "infill_material_flow label"
  2011. msgid "Infill Flow"
  2012. msgstr ""
  2013. #: fdmprinter.def.json
  2014. msgctxt "infill_material_flow description"
  2015. msgid "Flow compensation on infill lines."
  2016. msgstr ""
  2017. #: fdmprinter.def.json
  2018. msgctxt "skirt_brim_material_flow label"
  2019. msgid "Skirt/Brim Flow"
  2020. msgstr ""
  2021. #: fdmprinter.def.json
  2022. msgctxt "skirt_brim_material_flow description"
  2023. msgid "Flow compensation on skirt or brim lines."
  2024. msgstr ""
  2025. #: fdmprinter.def.json
  2026. msgctxt "support_material_flow label"
  2027. msgid "Support Flow"
  2028. msgstr ""
  2029. #: fdmprinter.def.json
  2030. msgctxt "support_material_flow description"
  2031. msgid "Flow compensation on support structure lines."
  2032. msgstr ""
  2033. #: fdmprinter.def.json
  2034. msgctxt "support_interface_material_flow label"
  2035. msgid "Support Interface Flow"
  2036. msgstr ""
  2037. #: fdmprinter.def.json
  2038. msgctxt "support_interface_material_flow description"
  2039. msgid "Flow compensation on lines of support roof or floor."
  2040. msgstr ""
  2041. #: fdmprinter.def.json
  2042. msgctxt "support_roof_material_flow label"
  2043. msgid "Support Roof Flow"
  2044. msgstr ""
  2045. #: fdmprinter.def.json
  2046. msgctxt "support_roof_material_flow description"
  2047. msgid "Flow compensation on support roof lines."
  2048. msgstr ""
  2049. #: fdmprinter.def.json
  2050. msgctxt "support_bottom_material_flow label"
  2051. msgid "Support Floor Flow"
  2052. msgstr ""
  2053. #: fdmprinter.def.json
  2054. msgctxt "support_bottom_material_flow description"
  2055. msgid "Flow compensation on support floor lines."
  2056. msgstr ""
  2057. #: fdmprinter.def.json
  2058. msgctxt "prime_tower_flow label"
  2059. msgid "Prime Tower Flow"
  2060. msgstr ""
  2061. #: fdmprinter.def.json
  2062. msgctxt "prime_tower_flow description"
  2063. msgid "Flow compensation on prime tower lines."
  2064. msgstr ""
  2065. #: fdmprinter.def.json
  2066. msgctxt "material_flow_layer_0 label"
  2067. msgid "Initial Layer Flow"
  2068. msgstr ""
  2069. #: fdmprinter.def.json
  2070. msgctxt "material_flow_layer_0 description"
  2071. msgid "Flow compensation for the first layer: the amount of material extruded on the initial layer is multiplied by this value."
  2072. msgstr ""
  2073. #: fdmprinter.def.json
  2074. msgctxt "wall_x_material_flow_layer_0 label"
  2075. msgid "Initial Layer Inner Wall Flow"
  2076. msgstr ""
  2077. #: fdmprinter.def.json
  2078. msgctxt "wall_x_material_flow_layer_0 description"
  2079. msgid "Flow compensation on wall lines for all wall lines except the outermost one, but only for the first layer"
  2080. msgstr ""
  2081. #: fdmprinter.def.json
  2082. msgctxt "wall_0_material_flow_layer_0 label"
  2083. msgid "Initial Layer Outer Wall Flow"
  2084. msgstr ""
  2085. #: fdmprinter.def.json
  2086. msgctxt "wall_0_material_flow_layer_0 description"
  2087. msgid "Flow compensation on the outermost wall line of the first layer."
  2088. msgstr ""
  2089. #: fdmprinter.def.json
  2090. msgctxt "skin_material_flow_layer_0 label"
  2091. msgid "Initial Layer Bottom Flow"
  2092. msgstr ""
  2093. #: fdmprinter.def.json
  2094. msgctxt "skin_material_flow_layer_0 description"
  2095. msgid "Flow compensation on bottom lines of the first layer"
  2096. msgstr ""
  2097. #: fdmprinter.def.json
  2098. msgctxt "material_standby_temperature label"
  2099. msgid "Standby Temperature"
  2100. msgstr ""
  2101. #: fdmprinter.def.json
  2102. msgctxt "material_standby_temperature description"
  2103. msgid "The temperature of the nozzle when another nozzle is currently used for printing."
  2104. msgstr ""
  2105. #: fdmprinter.def.json
  2106. msgctxt "speed label"
  2107. msgid "Speed"
  2108. msgstr ""
  2109. #: fdmprinter.def.json
  2110. msgctxt "speed description"
  2111. msgid "Speed"
  2112. msgstr ""
  2113. #: fdmprinter.def.json
  2114. msgctxt "speed_print label"
  2115. msgid "Print Speed"
  2116. msgstr ""
  2117. #: fdmprinter.def.json
  2118. msgctxt "speed_print description"
  2119. msgid "The speed at which printing happens."
  2120. msgstr ""
  2121. #: fdmprinter.def.json
  2122. msgctxt "speed_infill label"
  2123. msgid "Infill Speed"
  2124. msgstr ""
  2125. #: fdmprinter.def.json
  2126. msgctxt "speed_infill description"
  2127. msgid "The speed at which infill is printed."
  2128. msgstr ""
  2129. #: fdmprinter.def.json
  2130. msgctxt "speed_wall label"
  2131. msgid "Wall Speed"
  2132. msgstr ""
  2133. #: fdmprinter.def.json
  2134. msgctxt "speed_wall description"
  2135. msgid "The speed at which the walls are printed."
  2136. msgstr ""
  2137. #: fdmprinter.def.json
  2138. msgctxt "speed_wall_0 label"
  2139. msgid "Outer Wall Speed"
  2140. msgstr ""
  2141. #: fdmprinter.def.json
  2142. msgctxt "speed_wall_0 description"
  2143. msgid "The speed at which the outermost walls are printed. Printing the outer wall at a lower speed improves the final skin quality. However, having a large difference between the inner wall speed and the outer wall speed will affect quality in a negative way."
  2144. msgstr ""
  2145. #: fdmprinter.def.json
  2146. msgctxt "speed_wall_x label"
  2147. msgid "Inner Wall Speed"
  2148. msgstr ""
  2149. #: fdmprinter.def.json
  2150. msgctxt "speed_wall_x description"
  2151. msgid "The speed at which all inner walls are printed. Printing the inner wall faster than the outer wall will reduce printing time. It works well to set this in between the outer wall speed and the infill speed."
  2152. msgstr ""
  2153. #: fdmprinter.def.json
  2154. msgctxt "speed_roofing label"
  2155. msgid "Top Surface Skin Speed"
  2156. msgstr ""
  2157. #: fdmprinter.def.json
  2158. msgctxt "speed_roofing description"
  2159. msgid "The speed at which top surface skin layers are printed."
  2160. msgstr ""
  2161. #: fdmprinter.def.json
  2162. msgctxt "speed_topbottom label"
  2163. msgid "Top/Bottom Speed"
  2164. msgstr ""
  2165. #: fdmprinter.def.json
  2166. msgctxt "speed_topbottom description"
  2167. msgid "The speed at which top/bottom layers are printed."
  2168. msgstr ""
  2169. #: fdmprinter.def.json
  2170. msgctxt "speed_support label"
  2171. msgid "Support Speed"
  2172. msgstr ""
  2173. #: fdmprinter.def.json
  2174. msgctxt "speed_support description"
  2175. msgid "The speed at which the support structure is printed. Printing support at higher speeds can greatly reduce printing time. The surface quality of the support structure is not important since it is removed after printing."
  2176. msgstr ""
  2177. #: fdmprinter.def.json
  2178. msgctxt "speed_support_infill label"
  2179. msgid "Support Infill Speed"
  2180. msgstr ""
  2181. #: fdmprinter.def.json
  2182. msgctxt "speed_support_infill description"
  2183. msgid "The speed at which the infill of support is printed. Printing the infill at lower speeds improves stability."
  2184. msgstr ""
  2185. #: fdmprinter.def.json
  2186. msgctxt "speed_support_interface label"
  2187. msgid "Support Interface Speed"
  2188. msgstr ""
  2189. #: fdmprinter.def.json
  2190. msgctxt "speed_support_interface description"
  2191. msgid "The speed at which the roofs and floors of support are printed. Printing them at lower speeds can improve overhang quality."
  2192. msgstr ""
  2193. #: fdmprinter.def.json
  2194. msgctxt "speed_support_roof label"
  2195. msgid "Support Roof Speed"
  2196. msgstr ""
  2197. #: fdmprinter.def.json
  2198. msgctxt "speed_support_roof description"
  2199. msgid "The speed at which the roofs of support are printed. Printing them at lower speeds can improve overhang quality."
  2200. msgstr ""
  2201. #: fdmprinter.def.json
  2202. msgctxt "speed_support_bottom label"
  2203. msgid "Support Floor Speed"
  2204. msgstr ""
  2205. #: fdmprinter.def.json
  2206. msgctxt "speed_support_bottom description"
  2207. msgid "The speed at which the floor of support is printed. Printing it at lower speed can improve adhesion of support on top of your model."
  2208. msgstr ""
  2209. #: fdmprinter.def.json
  2210. msgctxt "speed_prime_tower label"
  2211. msgid "Prime Tower Speed"
  2212. msgstr ""
  2213. #: fdmprinter.def.json
  2214. msgctxt "speed_prime_tower description"
  2215. msgid "The speed at which the prime tower is printed. Printing the prime tower slower can make it more stable when the adhesion between the different filaments is suboptimal."
  2216. msgstr ""
  2217. #: fdmprinter.def.json
  2218. msgctxt "speed_travel label"
  2219. msgid "Travel Speed"
  2220. msgstr ""
  2221. #: fdmprinter.def.json
  2222. msgctxt "speed_travel description"
  2223. msgid "The speed at which travel moves are made."
  2224. msgstr ""
  2225. #: fdmprinter.def.json
  2226. msgctxt "speed_layer_0 label"
  2227. msgid "Initial Layer Speed"
  2228. msgstr ""
  2229. #: fdmprinter.def.json
  2230. msgctxt "speed_layer_0 description"
  2231. msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
  2232. msgstr ""
  2233. #: fdmprinter.def.json
  2234. msgctxt "speed_print_layer_0 label"
  2235. msgid "Initial Layer Print Speed"
  2236. msgstr ""
  2237. #: fdmprinter.def.json
  2238. msgctxt "speed_print_layer_0 description"
  2239. msgid "The speed of printing for the initial layer. A lower value is advised to improve adhesion to the build plate."
  2240. msgstr ""
  2241. #: fdmprinter.def.json
  2242. msgctxt "speed_travel_layer_0 label"
  2243. msgid "Initial Layer Travel Speed"
  2244. msgstr ""
  2245. #: fdmprinter.def.json
  2246. msgctxt "speed_travel_layer_0 description"
  2247. msgid "The speed of travel moves in the initial layer. A lower value is advised to prevent pulling previously printed parts away from the build plate. The value of this setting can automatically be calculated from the ratio between the Travel Speed and the Print Speed."
  2248. msgstr ""
  2249. #: fdmprinter.def.json
  2250. msgctxt "skirt_brim_speed label"
  2251. msgid "Skirt/Brim Speed"
  2252. msgstr ""
  2253. #: fdmprinter.def.json
  2254. msgctxt "skirt_brim_speed description"
  2255. msgid "The speed at which the skirt and brim are printed. Normally this is done at the initial layer speed, but sometimes you might want to print the skirt or brim at a different speed."
  2256. msgstr ""
  2257. #: fdmprinter.def.json
  2258. msgctxt "speed_z_hop label"
  2259. msgid "Z Hop Speed"
  2260. msgstr ""
  2261. #: fdmprinter.def.json
  2262. msgctxt "speed_z_hop description"
  2263. msgid "The speed at which the vertical Z movement is made for Z Hops. This is typically lower than the print speed since the build plate or machine's gantry is harder to move."
  2264. msgstr ""
  2265. #: fdmprinter.def.json
  2266. msgctxt "speed_slowdown_layers label"
  2267. msgid "Number of Slower Layers"
  2268. msgstr ""
  2269. #: fdmprinter.def.json
  2270. msgctxt "speed_slowdown_layers description"
  2271. msgid "The first few layers are printed slower than the rest of the model, to get better adhesion to the build plate and improve the overall success rate of prints. The speed is gradually increased over these layers."
  2272. msgstr ""
  2273. #: fdmprinter.def.json
  2274. msgctxt "speed_equalize_flow_width_factor label"
  2275. msgid "Flow Equalization Ratio"
  2276. msgstr ""
  2277. #: fdmprinter.def.json
  2278. msgctxt "speed_equalize_flow_width_factor description"
  2279. msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
  2280. msgstr ""
  2281. #: fdmprinter.def.json
  2282. msgctxt "acceleration_enabled label"
  2283. msgid "Enable Acceleration Control"
  2284. msgstr ""
  2285. #: fdmprinter.def.json
  2286. msgctxt "acceleration_enabled description"
  2287. msgid "Enables adjusting the print head acceleration. Increasing the accelerations can reduce printing time at the cost of print quality."
  2288. msgstr ""
  2289. #: fdmprinter.def.json
  2290. msgctxt "acceleration_travel_enabled label"
  2291. msgid "Enable Travel Acceleration"
  2292. msgstr ""
  2293. #: fdmprinter.def.json
  2294. msgctxt "acceleration_travel_enabled description"
  2295. msgid "Use a separate acceleration rate for travel moves. If disabled, travel moves will use the acceleration value of the printed line at their destination."
  2296. msgstr ""
  2297. #: fdmprinter.def.json
  2298. msgctxt "acceleration_print label"
  2299. msgid "Print Acceleration"
  2300. msgstr ""
  2301. #: fdmprinter.def.json
  2302. msgctxt "acceleration_print description"
  2303. msgid "The acceleration with which printing happens."
  2304. msgstr ""
  2305. #: fdmprinter.def.json
  2306. msgctxt "acceleration_infill label"
  2307. msgid "Infill Acceleration"
  2308. msgstr ""
  2309. #: fdmprinter.def.json
  2310. msgctxt "acceleration_infill description"
  2311. msgid "The acceleration with which infill is printed."
  2312. msgstr ""
  2313. #: fdmprinter.def.json
  2314. msgctxt "acceleration_wall label"
  2315. msgid "Wall Acceleration"
  2316. msgstr ""
  2317. #: fdmprinter.def.json
  2318. msgctxt "acceleration_wall description"
  2319. msgid "The acceleration with which the walls are printed."
  2320. msgstr ""
  2321. #: fdmprinter.def.json
  2322. msgctxt "acceleration_wall_0 label"
  2323. msgid "Outer Wall Acceleration"
  2324. msgstr ""
  2325. #: fdmprinter.def.json
  2326. msgctxt "acceleration_wall_0 description"
  2327. msgid "The acceleration with which the outermost walls are printed."
  2328. msgstr ""
  2329. #: fdmprinter.def.json
  2330. msgctxt "acceleration_wall_x label"
  2331. msgid "Inner Wall Acceleration"
  2332. msgstr ""
  2333. #: fdmprinter.def.json
  2334. msgctxt "acceleration_wall_x description"
  2335. msgid "The acceleration with which all inner walls are printed."
  2336. msgstr ""
  2337. #: fdmprinter.def.json
  2338. msgctxt "acceleration_roofing label"
  2339. msgid "Top Surface Skin Acceleration"
  2340. msgstr ""
  2341. #: fdmprinter.def.json
  2342. msgctxt "acceleration_roofing description"
  2343. msgid "The acceleration with which top surface skin layers are printed."
  2344. msgstr ""
  2345. #: fdmprinter.def.json
  2346. msgctxt "acceleration_topbottom label"
  2347. msgid "Top/Bottom Acceleration"
  2348. msgstr ""
  2349. #: fdmprinter.def.json
  2350. msgctxt "acceleration_topbottom description"
  2351. msgid "The acceleration with which top/bottom layers are printed."
  2352. msgstr ""
  2353. #: fdmprinter.def.json
  2354. msgctxt "acceleration_support label"
  2355. msgid "Support Acceleration"
  2356. msgstr ""
  2357. #: fdmprinter.def.json
  2358. msgctxt "acceleration_support description"
  2359. msgid "The acceleration with which the support structure is printed."
  2360. msgstr ""
  2361. #: fdmprinter.def.json
  2362. msgctxt "acceleration_support_infill label"
  2363. msgid "Support Infill Acceleration"
  2364. msgstr ""
  2365. #: fdmprinter.def.json
  2366. msgctxt "acceleration_support_infill description"
  2367. msgid "The acceleration with which the infill of support is printed."
  2368. msgstr ""
  2369. #: fdmprinter.def.json
  2370. msgctxt "acceleration_support_interface label"
  2371. msgid "Support Interface Acceleration"
  2372. msgstr ""
  2373. #: fdmprinter.def.json
  2374. msgctxt "acceleration_support_interface description"
  2375. msgid "The acceleration with which the roofs and floors of support are printed. Printing them at lower acceleration can improve overhang quality."
  2376. msgstr ""
  2377. #: fdmprinter.def.json
  2378. msgctxt "acceleration_support_roof label"
  2379. msgid "Support Roof Acceleration"
  2380. msgstr ""
  2381. #: fdmprinter.def.json
  2382. msgctxt "acceleration_support_roof description"
  2383. msgid "The acceleration with which the roofs of support are printed. Printing them at lower acceleration can improve overhang quality."
  2384. msgstr ""
  2385. #: fdmprinter.def.json
  2386. msgctxt "acceleration_support_bottom label"
  2387. msgid "Support Floor Acceleration"
  2388. msgstr ""
  2389. #: fdmprinter.def.json
  2390. msgctxt "acceleration_support_bottom description"
  2391. msgid "The acceleration with which the floors of support are printed. Printing them at lower acceleration can improve adhesion of support on top of your model."
  2392. msgstr ""
  2393. #: fdmprinter.def.json
  2394. msgctxt "acceleration_prime_tower label"
  2395. msgid "Prime Tower Acceleration"
  2396. msgstr ""
  2397. #: fdmprinter.def.json
  2398. msgctxt "acceleration_prime_tower description"
  2399. msgid "The acceleration with which the prime tower is printed."
  2400. msgstr ""
  2401. #: fdmprinter.def.json
  2402. msgctxt "acceleration_travel label"
  2403. msgid "Travel Acceleration"
  2404. msgstr ""
  2405. #: fdmprinter.def.json
  2406. msgctxt "acceleration_travel description"
  2407. msgid "The acceleration with which travel moves are made."
  2408. msgstr ""
  2409. #: fdmprinter.def.json
  2410. msgctxt "acceleration_layer_0 label"
  2411. msgid "Initial Layer Acceleration"
  2412. msgstr ""
  2413. #: fdmprinter.def.json
  2414. msgctxt "acceleration_layer_0 description"
  2415. msgid "The acceleration for the initial layer."
  2416. msgstr ""
  2417. #: fdmprinter.def.json
  2418. msgctxt "acceleration_print_layer_0 label"
  2419. msgid "Initial Layer Print Acceleration"
  2420. msgstr ""
  2421. #: fdmprinter.def.json
  2422. msgctxt "acceleration_print_layer_0 description"
  2423. msgid "The acceleration during the printing of the initial layer."
  2424. msgstr ""
  2425. #: fdmprinter.def.json
  2426. msgctxt "acceleration_travel_layer_0 label"
  2427. msgid "Initial Layer Travel Acceleration"
  2428. msgstr ""
  2429. #: fdmprinter.def.json
  2430. msgctxt "acceleration_travel_layer_0 description"
  2431. msgid "The acceleration for travel moves in the initial layer."
  2432. msgstr ""
  2433. #: fdmprinter.def.json
  2434. msgctxt "acceleration_skirt_brim label"
  2435. msgid "Skirt/Brim Acceleration"
  2436. msgstr ""
  2437. #: fdmprinter.def.json
  2438. msgctxt "acceleration_skirt_brim description"
  2439. msgid "The acceleration with which the skirt and brim are printed. Normally this is done with the initial layer acceleration, but sometimes you might want to print the skirt or brim at a different acceleration."
  2440. msgstr ""
  2441. #: fdmprinter.def.json
  2442. msgctxt "jerk_enabled label"
  2443. msgid "Enable Jerk Control"
  2444. msgstr ""
  2445. #: fdmprinter.def.json
  2446. msgctxt "jerk_enabled description"
  2447. msgid "Enables adjusting the jerk of print head when the velocity in the X or Y axis changes. Increasing the jerk can reduce printing time at the cost of print quality."
  2448. msgstr ""
  2449. #: fdmprinter.def.json
  2450. msgctxt "jerk_travel_enabled label"
  2451. msgid "Enable Travel Jerk"
  2452. msgstr ""
  2453. #: fdmprinter.def.json
  2454. msgctxt "jerk_travel_enabled description"
  2455. msgid "Use a separate jerk rate for travel moves. If disabled, travel moves will use the jerk value of the printed line at their destination."
  2456. msgstr ""
  2457. #: fdmprinter.def.json
  2458. msgctxt "jerk_print label"
  2459. msgid "Print Jerk"
  2460. msgstr ""
  2461. #: fdmprinter.def.json
  2462. msgctxt "jerk_print description"
  2463. msgid "The maximum instantaneous velocity change of the print head."
  2464. msgstr ""
  2465. #: fdmprinter.def.json
  2466. msgctxt "jerk_infill label"
  2467. msgid "Infill Jerk"
  2468. msgstr ""
  2469. #: fdmprinter.def.json
  2470. msgctxt "jerk_infill description"
  2471. msgid "The maximum instantaneous velocity change with which infill is printed."
  2472. msgstr ""
  2473. #: fdmprinter.def.json
  2474. msgctxt "jerk_wall label"
  2475. msgid "Wall Jerk"
  2476. msgstr ""
  2477. #: fdmprinter.def.json
  2478. msgctxt "jerk_wall description"
  2479. msgid "The maximum instantaneous velocity change with which the walls are printed."
  2480. msgstr ""
  2481. #: fdmprinter.def.json
  2482. msgctxt "jerk_wall_0 label"
  2483. msgid "Outer Wall Jerk"
  2484. msgstr ""
  2485. #: fdmprinter.def.json
  2486. msgctxt "jerk_wall_0 description"
  2487. msgid "The maximum instantaneous velocity change with which the outermost walls are printed."
  2488. msgstr ""
  2489. #: fdmprinter.def.json
  2490. msgctxt "jerk_wall_x label"
  2491. msgid "Inner Wall Jerk"
  2492. msgstr ""
  2493. #: fdmprinter.def.json
  2494. msgctxt "jerk_wall_x description"
  2495. msgid "The maximum instantaneous velocity change with which all inner walls are printed."
  2496. msgstr ""
  2497. #: fdmprinter.def.json
  2498. msgctxt "jerk_roofing label"
  2499. msgid "Top Surface Skin Jerk"
  2500. msgstr ""
  2501. #: fdmprinter.def.json
  2502. msgctxt "jerk_roofing description"
  2503. msgid "The maximum instantaneous velocity change with which top surface skin layers are printed."
  2504. msgstr ""
  2505. #: fdmprinter.def.json
  2506. msgctxt "jerk_topbottom label"
  2507. msgid "Top/Bottom Jerk"
  2508. msgstr ""
  2509. #: fdmprinter.def.json
  2510. msgctxt "jerk_topbottom description"
  2511. msgid "The maximum instantaneous velocity change with which top/bottom layers are printed."
  2512. msgstr ""
  2513. #: fdmprinter.def.json
  2514. msgctxt "jerk_support label"
  2515. msgid "Support Jerk"
  2516. msgstr ""
  2517. #: fdmprinter.def.json
  2518. msgctxt "jerk_support description"
  2519. msgid "The maximum instantaneous velocity change with which the support structure is printed."
  2520. msgstr ""
  2521. #: fdmprinter.def.json
  2522. msgctxt "jerk_support_infill label"
  2523. msgid "Support Infill Jerk"
  2524. msgstr ""
  2525. #: fdmprinter.def.json
  2526. msgctxt "jerk_support_infill description"
  2527. msgid "The maximum instantaneous velocity change with which the infill of support is printed."
  2528. msgstr ""
  2529. #: fdmprinter.def.json
  2530. msgctxt "jerk_support_interface label"
  2531. msgid "Support Interface Jerk"
  2532. msgstr ""
  2533. #: fdmprinter.def.json
  2534. msgctxt "jerk_support_interface description"
  2535. msgid "The maximum instantaneous velocity change with which the roofs and floors of support are printed."
  2536. msgstr ""
  2537. #: fdmprinter.def.json
  2538. msgctxt "jerk_support_roof label"
  2539. msgid "Support Roof Jerk"
  2540. msgstr ""
  2541. #: fdmprinter.def.json
  2542. msgctxt "jerk_support_roof description"
  2543. msgid "The maximum instantaneous velocity change with which the roofs of support are printed."
  2544. msgstr ""
  2545. #: fdmprinter.def.json
  2546. msgctxt "jerk_support_bottom label"
  2547. msgid "Support Floor Jerk"
  2548. msgstr ""
  2549. #: fdmprinter.def.json
  2550. msgctxt "jerk_support_bottom description"
  2551. msgid "The maximum instantaneous velocity change with which the floors of support are printed."
  2552. msgstr ""
  2553. #: fdmprinter.def.json
  2554. msgctxt "jerk_prime_tower label"
  2555. msgid "Prime Tower Jerk"
  2556. msgstr ""
  2557. #: fdmprinter.def.json
  2558. msgctxt "jerk_prime_tower description"
  2559. msgid "The maximum instantaneous velocity change with which the prime tower is printed."
  2560. msgstr ""
  2561. #: fdmprinter.def.json
  2562. msgctxt "jerk_travel label"
  2563. msgid "Travel Jerk"
  2564. msgstr ""
  2565. #: fdmprinter.def.json
  2566. msgctxt "jerk_travel description"
  2567. msgid "The maximum instantaneous velocity change with which travel moves are made."
  2568. msgstr ""
  2569. #: fdmprinter.def.json
  2570. msgctxt "jerk_layer_0 label"
  2571. msgid "Initial Layer Jerk"
  2572. msgstr ""
  2573. #: fdmprinter.def.json
  2574. msgctxt "jerk_layer_0 description"
  2575. msgid "The print maximum instantaneous velocity change for the initial layer."
  2576. msgstr ""
  2577. #: fdmprinter.def.json
  2578. msgctxt "jerk_print_layer_0 label"
  2579. msgid "Initial Layer Print Jerk"
  2580. msgstr ""
  2581. #: fdmprinter.def.json
  2582. msgctxt "jerk_print_layer_0 description"
  2583. msgid "The maximum instantaneous velocity change during the printing of the initial layer."
  2584. msgstr ""
  2585. #: fdmprinter.def.json
  2586. msgctxt "jerk_travel_layer_0 label"
  2587. msgid "Initial Layer Travel Jerk"
  2588. msgstr ""
  2589. #: fdmprinter.def.json
  2590. msgctxt "jerk_travel_layer_0 description"
  2591. msgid "The acceleration for travel moves in the initial layer."
  2592. msgstr ""
  2593. #: fdmprinter.def.json
  2594. msgctxt "jerk_skirt_brim label"
  2595. msgid "Skirt/Brim Jerk"
  2596. msgstr ""
  2597. #: fdmprinter.def.json
  2598. msgctxt "jerk_skirt_brim description"
  2599. msgid "The maximum instantaneous velocity change with which the skirt and brim are printed."
  2600. msgstr ""
  2601. #: fdmprinter.def.json
  2602. msgctxt "travel label"
  2603. msgid "Travel"
  2604. msgstr ""
  2605. #: fdmprinter.def.json
  2606. msgctxt "travel description"
  2607. msgid "travel"
  2608. msgstr ""
  2609. #: fdmprinter.def.json
  2610. msgctxt "retraction_enable label"
  2611. msgid "Enable Retraction"
  2612. msgstr ""
  2613. #: fdmprinter.def.json
  2614. msgctxt "retraction_enable description"
  2615. msgid "Retract the filament when the nozzle is moving over a non-printed area."
  2616. msgstr ""
  2617. #: fdmprinter.def.json
  2618. msgctxt "retract_at_layer_change label"
  2619. msgid "Retract at Layer Change"
  2620. msgstr ""
  2621. #: fdmprinter.def.json
  2622. msgctxt "retract_at_layer_change description"
  2623. msgid "Retract the filament when the nozzle is moving to the next layer."
  2624. msgstr ""
  2625. #: fdmprinter.def.json
  2626. msgctxt "retraction_amount label"
  2627. msgid "Retraction Distance"
  2628. msgstr ""
  2629. #: fdmprinter.def.json
  2630. msgctxt "retraction_amount description"
  2631. msgid "The length of material retracted during a retraction move."
  2632. msgstr ""
  2633. #: fdmprinter.def.json
  2634. msgctxt "retraction_speed label"
  2635. msgid "Retraction Speed"
  2636. msgstr ""
  2637. #: fdmprinter.def.json
  2638. msgctxt "retraction_speed description"
  2639. msgid "The speed at which the filament is retracted and primed during a retraction move."
  2640. msgstr ""
  2641. #: fdmprinter.def.json
  2642. msgctxt "retraction_retract_speed label"
  2643. msgid "Retraction Retract Speed"
  2644. msgstr ""
  2645. #: fdmprinter.def.json
  2646. msgctxt "retraction_retract_speed description"
  2647. msgid "The speed at which the filament is retracted during a retraction move."
  2648. msgstr ""
  2649. #: fdmprinter.def.json
  2650. msgctxt "retraction_prime_speed label"
  2651. msgid "Retraction Prime Speed"
  2652. msgstr ""
  2653. #: fdmprinter.def.json
  2654. msgctxt "retraction_prime_speed description"
  2655. msgid "The speed at which the filament is primed during a retraction move."
  2656. msgstr ""
  2657. #: fdmprinter.def.json
  2658. msgctxt "retraction_extra_prime_amount label"
  2659. msgid "Retraction Extra Prime Amount"
  2660. msgstr ""
  2661. #: fdmprinter.def.json
  2662. msgctxt "retraction_extra_prime_amount description"
  2663. msgid "Some material can ooze away during a travel move, which can be compensated for here."
  2664. msgstr ""
  2665. #: fdmprinter.def.json
  2666. msgctxt "retraction_min_travel label"
  2667. msgid "Retraction Minimum Travel"
  2668. msgstr ""
  2669. #: fdmprinter.def.json
  2670. msgctxt "retraction_min_travel description"
  2671. msgid "The minimum distance of travel needed for a retraction to happen at all. This helps to get fewer retractions in a small area."
  2672. msgstr ""
  2673. #: fdmprinter.def.json
  2674. msgctxt "retraction_count_max label"
  2675. msgid "Maximum Retraction Count"
  2676. msgstr ""
  2677. #: fdmprinter.def.json
  2678. msgctxt "retraction_count_max description"
  2679. msgid "This setting limits the number of retractions occurring within the minimum extrusion distance window. Further retractions within this window will be ignored. This avoids retracting repeatedly on the same piece of filament, as that can flatten the filament and cause grinding issues."
  2680. msgstr ""
  2681. #: fdmprinter.def.json
  2682. msgctxt "retraction_extrusion_window label"
  2683. msgid "Minimum Extrusion Distance Window"
  2684. msgstr ""
  2685. #: fdmprinter.def.json
  2686. msgctxt "retraction_extrusion_window description"
  2687. msgid "The window in which the maximum retraction count is enforced. This value should be approximately the same as the retraction distance, so that effectively the number of times a retraction passes the same patch of material is limited."
  2688. msgstr ""
  2689. #: fdmprinter.def.json
  2690. msgctxt "retraction_combing label"
  2691. msgid "Combing Mode"
  2692. msgstr ""
  2693. #: fdmprinter.def.json
  2694. msgctxt "retraction_combing description"
  2695. msgid "Combing keeps the nozzle within already printed areas when traveling. This results in slightly longer travel moves but reduces the need for retractions. If combing is off, the material will retract and the nozzle moves in a straight line to the next point. It is also possible to avoid combing over top/bottom skin areas or to only comb within the infill."
  2696. msgstr ""
  2697. #: fdmprinter.def.json
  2698. msgctxt "retraction_combing option off"
  2699. msgid "Off"
  2700. msgstr ""
  2701. #: fdmprinter.def.json
  2702. msgctxt "retraction_combing option all"
  2703. msgid "All"
  2704. msgstr ""
  2705. #: fdmprinter.def.json
  2706. msgctxt "retraction_combing option no_outer_surfaces"
  2707. msgid "Not on Outer Surface"
  2708. msgstr ""
  2709. #: fdmprinter.def.json
  2710. msgctxt "retraction_combing option noskin"
  2711. msgid "Not in Skin"
  2712. msgstr ""
  2713. #: fdmprinter.def.json
  2714. msgctxt "retraction_combing option infill"
  2715. msgid "Within Infill"
  2716. msgstr ""
  2717. #: fdmprinter.def.json
  2718. msgctxt "retraction_combing_max_distance label"
  2719. msgid "Max Comb Distance With No Retract"
  2720. msgstr ""
  2721. #: fdmprinter.def.json
  2722. msgctxt "retraction_combing_max_distance description"
  2723. msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
  2724. msgstr ""
  2725. #: fdmprinter.def.json
  2726. msgctxt "travel_retract_before_outer_wall label"
  2727. msgid "Retract Before Outer Wall"
  2728. msgstr ""
  2729. #: fdmprinter.def.json
  2730. msgctxt "travel_retract_before_outer_wall description"
  2731. msgid "Always retract when moving to start an outer wall."
  2732. msgstr ""
  2733. #: fdmprinter.def.json
  2734. msgctxt "travel_avoid_other_parts label"
  2735. msgid "Avoid Printed Parts When Traveling"
  2736. msgstr ""
  2737. #: fdmprinter.def.json
  2738. msgctxt "travel_avoid_other_parts description"
  2739. msgid "The nozzle avoids already printed parts when traveling. This option is only available when combing is enabled."
  2740. msgstr ""
  2741. #: fdmprinter.def.json
  2742. msgctxt "travel_avoid_supports label"
  2743. msgid "Avoid Supports When Traveling"
  2744. msgstr ""
  2745. #: fdmprinter.def.json
  2746. msgctxt "travel_avoid_supports description"
  2747. msgid "The nozzle avoids already printed supports when traveling. This option is only available when combing is enabled."
  2748. msgstr ""
  2749. #: fdmprinter.def.json
  2750. msgctxt "travel_avoid_distance label"
  2751. msgid "Travel Avoid Distance"
  2752. msgstr ""
  2753. #: fdmprinter.def.json
  2754. msgctxt "travel_avoid_distance description"
  2755. msgid "The distance between the nozzle and already printed parts when avoiding during travel moves."
  2756. msgstr ""
  2757. #: fdmprinter.def.json
  2758. msgctxt "layer_start_x label"
  2759. msgid "Layer Start X"
  2760. msgstr ""
  2761. #: fdmprinter.def.json
  2762. msgctxt "layer_start_x description"
  2763. msgid "The X coordinate of the position near where to find the part to start printing each layer."
  2764. msgstr ""
  2765. #: fdmprinter.def.json
  2766. msgctxt "layer_start_y label"
  2767. msgid "Layer Start Y"
  2768. msgstr ""
  2769. #: fdmprinter.def.json
  2770. msgctxt "layer_start_y description"
  2771. msgid "The Y coordinate of the position near where to find the part to start printing each layer."
  2772. msgstr ""
  2773. #: fdmprinter.def.json
  2774. msgctxt "retraction_hop_enabled label"
  2775. msgid "Z Hop When Retracted"
  2776. msgstr ""
  2777. #: fdmprinter.def.json
  2778. msgctxt "retraction_hop_enabled description"
  2779. msgid "Whenever a retraction is done, the build plate is lowered to create clearance between the nozzle and the print. It prevents the nozzle from hitting the print during travel moves, reducing the chance to knock the print from the build plate."
  2780. msgstr ""
  2781. #: fdmprinter.def.json
  2782. msgctxt "retraction_hop_only_when_collides label"
  2783. msgid "Z Hop Only Over Printed Parts"
  2784. msgstr ""
  2785. #: fdmprinter.def.json
  2786. msgctxt "retraction_hop_only_when_collides description"
  2787. msgid "Only perform a Z Hop when moving over printed parts which cannot be avoided by horizontal motion by Avoid Printed Parts when Traveling."
  2788. msgstr ""
  2789. #: fdmprinter.def.json
  2790. msgctxt "retraction_hop label"
  2791. msgid "Z Hop Height"
  2792. msgstr ""
  2793. #: fdmprinter.def.json
  2794. msgctxt "retraction_hop description"
  2795. msgid "The height difference when performing a Z Hop."
  2796. msgstr ""
  2797. #: fdmprinter.def.json
  2798. msgctxt "retraction_hop_after_extruder_switch label"
  2799. msgid "Z Hop After Extruder Switch"
  2800. msgstr ""
  2801. #: fdmprinter.def.json
  2802. msgctxt "retraction_hop_after_extruder_switch description"
  2803. msgid "After the machine switched from one extruder to the other, the build plate is lowered to create clearance between the nozzle and the print. This prevents the nozzle from leaving oozed material on the outside of a print."
  2804. msgstr ""
  2805. #: fdmprinter.def.json
  2806. msgctxt "retraction_hop_after_extruder_switch_height label"
  2807. msgid "Z Hop After Extruder Switch Height"
  2808. msgstr ""
  2809. #: fdmprinter.def.json
  2810. msgctxt "retraction_hop_after_extruder_switch_height description"
  2811. msgid "The height difference when performing a Z Hop after extruder switch."
  2812. msgstr ""
  2813. #: fdmprinter.def.json
  2814. msgctxt "cooling label"
  2815. msgid "Cooling"
  2816. msgstr ""
  2817. #: fdmprinter.def.json
  2818. msgctxt "cooling description"
  2819. msgid "Cooling"
  2820. msgstr ""
  2821. #: fdmprinter.def.json
  2822. msgctxt "cool_fan_enabled label"
  2823. msgid "Enable Print Cooling"
  2824. msgstr ""
  2825. #: fdmprinter.def.json
  2826. msgctxt "cool_fan_enabled description"
  2827. msgid "Enables the print cooling fans while printing. The fans improve print quality on layers with short layer times and bridging / overhangs."
  2828. msgstr ""
  2829. #: fdmprinter.def.json
  2830. msgctxt "cool_fan_speed label"
  2831. msgid "Fan Speed"
  2832. msgstr ""
  2833. #: fdmprinter.def.json
  2834. msgctxt "cool_fan_speed description"
  2835. msgid "The speed at which the print cooling fans spin."
  2836. msgstr ""
  2837. #: fdmprinter.def.json
  2838. msgctxt "cool_fan_speed_min label"
  2839. msgid "Regular Fan Speed"
  2840. msgstr ""
  2841. #: fdmprinter.def.json
  2842. msgctxt "cool_fan_speed_min description"
  2843. msgid "The speed at which the fans spin before hitting the threshold. When a layer prints faster than the threshold, the fan speed gradually inclines towards the maximum fan speed."
  2844. msgstr ""
  2845. #: fdmprinter.def.json
  2846. msgctxt "cool_fan_speed_max label"
  2847. msgid "Maximum Fan Speed"
  2848. msgstr ""
  2849. #: fdmprinter.def.json
  2850. msgctxt "cool_fan_speed_max description"
  2851. msgid "The speed at which the fans spin on the minimum layer time. The fan speed gradually increases between the regular fan speed and maximum fan speed when the threshold is hit."
  2852. msgstr ""
  2853. #: fdmprinter.def.json
  2854. msgctxt "cool_min_layer_time_fan_speed_max label"
  2855. msgid "Regular/Maximum Fan Speed Threshold"
  2856. msgstr ""
  2857. #: fdmprinter.def.json
  2858. msgctxt "cool_min_layer_time_fan_speed_max description"
  2859. msgid "The layer time which sets the threshold between regular fan speed and maximum fan speed. Layers that print slower than this time use regular fan speed. For faster layers the fan speed gradually increases towards the maximum fan speed."
  2860. msgstr ""
  2861. #: fdmprinter.def.json
  2862. msgctxt "cool_fan_speed_0 label"
  2863. msgid "Initial Fan Speed"
  2864. msgstr ""
  2865. #: fdmprinter.def.json
  2866. msgctxt "cool_fan_speed_0 description"
  2867. msgid "The speed at which the fans spin at the start of the print. In subsequent layers the fan speed is gradually increased up to the layer corresponding to Regular Fan Speed at Height."
  2868. msgstr ""
  2869. #: fdmprinter.def.json
  2870. msgctxt "cool_fan_full_at_height label"
  2871. msgid "Regular Fan Speed at Height"
  2872. msgstr ""
  2873. #: fdmprinter.def.json
  2874. msgctxt "cool_fan_full_at_height description"
  2875. msgid "The height at which the fans spin on regular fan speed. At the layers below the fan speed gradually increases from Initial Fan Speed to Regular Fan Speed."
  2876. msgstr ""
  2877. #: fdmprinter.def.json
  2878. msgctxt "cool_fan_full_layer label"
  2879. msgid "Regular Fan Speed at Layer"
  2880. msgstr ""
  2881. #: fdmprinter.def.json
  2882. msgctxt "cool_fan_full_layer description"
  2883. msgid "The layer at which the fans spin on regular fan speed. If regular fan speed at height is set, this value is calculated and rounded to a whole number."
  2884. msgstr ""
  2885. #: fdmprinter.def.json
  2886. msgctxt "cool_min_layer_time label"
  2887. msgid "Minimum Layer Time"
  2888. msgstr ""
  2889. #: fdmprinter.def.json
  2890. msgctxt "cool_min_layer_time description"
  2891. msgid "The minimum time spent in a layer. This forces the printer to slow down, to at least spend the time set here in one layer. This allows the printed material to cool down properly before printing the next layer. Layers may still take shorter than the minimal layer time if Lift Head is disabled and if the Minimum Speed would otherwise be violated."
  2892. msgstr ""
  2893. #: fdmprinter.def.json
  2894. msgctxt "cool_min_speed label"
  2895. msgid "Minimum Speed"
  2896. msgstr ""
  2897. #: fdmprinter.def.json
  2898. msgctxt "cool_min_speed description"
  2899. msgid "The minimum print speed, despite slowing down due to the minimum layer time. When the printer would slow down too much, the pressure in the nozzle would be too low and result in bad print quality."
  2900. msgstr ""
  2901. #: fdmprinter.def.json
  2902. msgctxt "cool_lift_head label"
  2903. msgid "Lift Head"
  2904. msgstr ""
  2905. #: fdmprinter.def.json
  2906. msgctxt "cool_lift_head description"
  2907. msgid "When the minimum speed is hit because of minimum layer time, lift the head away from the print and wait the extra time until the minimum layer time is reached."
  2908. msgstr ""
  2909. #: fdmprinter.def.json
  2910. msgctxt "cool_min_temperature label"
  2911. msgid "Small Layer Printing Temperature"
  2912. msgstr ""
  2913. #: fdmprinter.def.json
  2914. msgctxt "cool_min_temperature description"
  2915. msgid "When reducing print speeds because of the minimum layer time, the printing temperature is gradually reduced to this temperature."
  2916. msgstr ""
  2917. #: fdmprinter.def.json
  2918. msgctxt "support label"
  2919. msgid "Support"
  2920. msgstr ""
  2921. #: fdmprinter.def.json
  2922. msgctxt "support description"
  2923. msgid "Support"
  2924. msgstr ""
  2925. #: fdmprinter.def.json
  2926. msgctxt "support_enable label"
  2927. msgid "Generate Support"
  2928. msgstr ""
  2929. #: fdmprinter.def.json
  2930. msgctxt "support_enable description"
  2931. msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
  2932. msgstr ""
  2933. #: fdmprinter.def.json
  2934. msgctxt "support_extruder_nr label"
  2935. msgid "Support Extruder"
  2936. msgstr ""
  2937. #: fdmprinter.def.json
  2938. msgctxt "support_extruder_nr description"
  2939. msgid "The extruder train to use for printing the support. This is used in multi-extrusion."
  2940. msgstr ""
  2941. #: fdmprinter.def.json
  2942. msgctxt "support_infill_extruder_nr label"
  2943. msgid "Support Infill Extruder"
  2944. msgstr ""
  2945. #: fdmprinter.def.json
  2946. msgctxt "support_infill_extruder_nr description"
  2947. msgid "The extruder train to use for printing the infill of the support. This is used in multi-extrusion."
  2948. msgstr ""
  2949. #: fdmprinter.def.json
  2950. msgctxt "support_extruder_nr_layer_0 label"
  2951. msgid "First Layer Support Extruder"
  2952. msgstr ""
  2953. #: fdmprinter.def.json
  2954. msgctxt "support_extruder_nr_layer_0 description"
  2955. msgid "The extruder train to use for printing the first layer of support infill. This is used in multi-extrusion."
  2956. msgstr ""
  2957. #: fdmprinter.def.json
  2958. msgctxt "support_interface_extruder_nr label"
  2959. msgid "Support Interface Extruder"
  2960. msgstr ""
  2961. #: fdmprinter.def.json
  2962. msgctxt "support_interface_extruder_nr description"
  2963. msgid "The extruder train to use for printing the roofs and floors of the support. This is used in multi-extrusion."
  2964. msgstr ""
  2965. #: fdmprinter.def.json
  2966. msgctxt "support_roof_extruder_nr label"
  2967. msgid "Support Roof Extruder"
  2968. msgstr ""
  2969. #: fdmprinter.def.json
  2970. msgctxt "support_roof_extruder_nr description"
  2971. msgid "The extruder train to use for printing the roofs of the support. This is used in multi-extrusion."
  2972. msgstr ""
  2973. #: fdmprinter.def.json
  2974. msgctxt "support_bottom_extruder_nr label"
  2975. msgid "Support Floor Extruder"
  2976. msgstr ""
  2977. #: fdmprinter.def.json
  2978. msgctxt "support_bottom_extruder_nr description"
  2979. msgid "The extruder train to use for printing the floors of the support. This is used in multi-extrusion."
  2980. msgstr ""
  2981. #: fdmprinter.def.json
  2982. msgctxt "support_structure label"
  2983. msgid "Support Structure"
  2984. msgstr ""
  2985. #: fdmprinter.def.json
  2986. msgctxt "support_structure description"
  2987. msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
  2988. msgstr ""
  2989. #: fdmprinter.def.json
  2990. msgctxt "support_structure option normal"
  2991. msgid "Normal"
  2992. msgstr ""
  2993. #: fdmprinter.def.json
  2994. msgctxt "support_structure option tree"
  2995. msgid "Tree"
  2996. msgstr ""
  2997. #: fdmprinter.def.json
  2998. msgctxt "support_tree_angle label"
  2999. msgid "Tree Support Branch Angle"
  3000. msgstr ""
  3001. #: fdmprinter.def.json
  3002. msgctxt "support_tree_angle description"
  3003. msgid "The angle of the branches. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach."
  3004. msgstr ""
  3005. #: fdmprinter.def.json
  3006. msgctxt "support_tree_branch_distance label"
  3007. msgid "Tree Support Branch Distance"
  3008. msgstr ""
  3009. #: fdmprinter.def.json
  3010. msgctxt "support_tree_branch_distance description"
  3011. msgid "How far apart the branches need to be when they touch the model. Making this distance small will cause the tree support to touch the model at more points, causing better overhang but making support harder to remove."
  3012. msgstr ""
  3013. #: fdmprinter.def.json
  3014. msgctxt "support_tree_branch_diameter label"
  3015. msgid "Tree Support Branch Diameter"
  3016. msgstr ""
  3017. #: fdmprinter.def.json
  3018. msgctxt "support_tree_branch_diameter description"
  3019. msgid "The diameter of the thinnest branches of tree support. Thicker branches are more sturdy. Branches towards the base will be thicker than this."
  3020. msgstr ""
  3021. #: fdmprinter.def.json
  3022. msgctxt "support_tree_max_diameter label"
  3023. msgid "Tree Support Trunk Diameter"
  3024. msgstr ""
  3025. #: fdmprinter.def.json
  3026. msgctxt "support_tree_max_diameter description"
  3027. msgid "The diameter of the widest branches of tree support. A thicker trunk is more sturdy; a thinner trunk takes up less space on the build plate."
  3028. msgstr ""
  3029. #: fdmprinter.def.json
  3030. msgctxt "support_tree_branch_diameter_angle label"
  3031. msgid "Tree Support Branch Diameter Angle"
  3032. msgstr ""
  3033. #: fdmprinter.def.json
  3034. msgctxt "support_tree_branch_diameter_angle description"
  3035. msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the tree support."
  3036. msgstr ""
  3037. #: fdmprinter.def.json
  3038. msgctxt "support_tree_collision_resolution label"
  3039. msgid "Tree Support Collision Resolution"
  3040. msgstr ""
  3041. #: fdmprinter.def.json
  3042. msgctxt "support_tree_collision_resolution description"
  3043. msgid "Resolution to compute collisions with to avoid hitting the model. Setting this lower will produce more accurate trees that fail less often, but increases slicing time dramatically."
  3044. msgstr ""
  3045. #: fdmprinter.def.json
  3046. msgctxt "support_type label"
  3047. msgid "Support Placement"
  3048. msgstr ""
  3049. #: fdmprinter.def.json
  3050. msgctxt "support_type description"
  3051. msgid "Adjusts the placement of the support structures. The placement can be set to touching build plate or everywhere. When set to everywhere the support structures will also be printed on the model."
  3052. msgstr ""
  3053. #: fdmprinter.def.json
  3054. msgctxt "support_type option buildplate"
  3055. msgid "Touching Buildplate"
  3056. msgstr ""
  3057. #: fdmprinter.def.json
  3058. msgctxt "support_type option everywhere"
  3059. msgid "Everywhere"
  3060. msgstr ""
  3061. #: fdmprinter.def.json
  3062. msgctxt "support_angle label"
  3063. msgid "Support Overhang Angle"
  3064. msgstr ""
  3065. #: fdmprinter.def.json
  3066. msgctxt "support_angle description"
  3067. msgid "The minimum angle of overhangs for which support is added. At a value of 0° all overhangs are supported, 90° will not provide any support."
  3068. msgstr ""
  3069. #: fdmprinter.def.json
  3070. msgctxt "support_pattern label"
  3071. msgid "Support Pattern"
  3072. msgstr ""
  3073. #: fdmprinter.def.json
  3074. msgctxt "support_pattern description"
  3075. msgid "The pattern of the support structures of the print. The different options available result in sturdy or easy to remove support."
  3076. msgstr ""
  3077. #: fdmprinter.def.json
  3078. msgctxt "support_pattern option lines"
  3079. msgid "Lines"
  3080. msgstr ""
  3081. #: fdmprinter.def.json
  3082. msgctxt "support_pattern option grid"
  3083. msgid "Grid"
  3084. msgstr ""
  3085. #: fdmprinter.def.json
  3086. msgctxt "support_pattern option triangles"
  3087. msgid "Triangles"
  3088. msgstr ""
  3089. #: fdmprinter.def.json
  3090. msgctxt "support_pattern option concentric"
  3091. msgid "Concentric"
  3092. msgstr ""
  3093. #: fdmprinter.def.json
  3094. msgctxt "support_pattern option zigzag"
  3095. msgid "Zig Zag"
  3096. msgstr ""
  3097. #: fdmprinter.def.json
  3098. msgctxt "support_pattern option cross"
  3099. msgid "Cross"
  3100. msgstr ""
  3101. #: fdmprinter.def.json
  3102. msgctxt "support_pattern option gyroid"
  3103. msgid "Gyroid"
  3104. msgstr ""
  3105. #: fdmprinter.def.json
  3106. msgctxt "support_wall_count label"
  3107. msgid "Support Wall Line Count"
  3108. msgstr ""
  3109. #: fdmprinter.def.json
  3110. msgctxt "support_wall_count description"
  3111. msgid "The number of walls with which to surround support infill. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used."
  3112. msgstr ""
  3113. #: fdmprinter.def.json
  3114. msgctxt "support_interface_wall_count label"
  3115. msgid "Support Interface Wall Line Count"
  3116. msgstr ""
  3117. #: fdmprinter.def.json
  3118. msgctxt "support_interface_wall_count description"
  3119. msgid "The number of walls with which to surround support interface. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used."
  3120. msgstr ""
  3121. #: fdmprinter.def.json
  3122. msgctxt "support_roof_wall_count label"
  3123. msgid "Support Roof Wall Line Count"
  3124. msgstr ""
  3125. #: fdmprinter.def.json
  3126. msgctxt "support_roof_wall_count description"
  3127. msgid "The number of walls with which to surround support interface roof. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used."
  3128. msgstr ""
  3129. #: fdmprinter.def.json
  3130. msgctxt "support_bottom_wall_count label"
  3131. msgid "Support Bottom Wall Line Count"
  3132. msgstr ""
  3133. #: fdmprinter.def.json
  3134. msgctxt "support_bottom_wall_count description"
  3135. msgid "The number of walls with which to surround support interface floor. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used."
  3136. msgstr ""
  3137. #: fdmprinter.def.json
  3138. msgctxt "zig_zaggify_support label"
  3139. msgid "Connect Support Lines"
  3140. msgstr ""
  3141. #: fdmprinter.def.json
  3142. msgctxt "zig_zaggify_support description"
  3143. msgid "Connect the ends of the support lines together. Enabling this setting can make your support more sturdy and reduce underextrusion, but it will cost more material."
  3144. msgstr ""
  3145. #: fdmprinter.def.json
  3146. msgctxt "support_connect_zigzags label"
  3147. msgid "Connect Support ZigZags"
  3148. msgstr ""
  3149. #: fdmprinter.def.json
  3150. msgctxt "support_connect_zigzags description"
  3151. msgid "Connect the ZigZags. This will increase the strength of the zig zag support structure."
  3152. msgstr ""
  3153. #: fdmprinter.def.json
  3154. msgctxt "support_infill_rate label"
  3155. msgid "Support Density"
  3156. msgstr ""
  3157. #: fdmprinter.def.json
  3158. msgctxt "support_infill_rate description"
  3159. msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove."
  3160. msgstr ""
  3161. #: fdmprinter.def.json
  3162. msgctxt "support_line_distance label"
  3163. msgid "Support Line Distance"
  3164. msgstr ""
  3165. #: fdmprinter.def.json
  3166. msgctxt "support_line_distance description"
  3167. msgid "Distance between the printed support structure lines. This setting is calculated by the support density."
  3168. msgstr ""
  3169. #: fdmprinter.def.json
  3170. msgctxt "support_initial_layer_line_distance label"
  3171. msgid "Initial Layer Support Line Distance"
  3172. msgstr ""
  3173. #: fdmprinter.def.json
  3174. msgctxt "support_initial_layer_line_distance description"
  3175. msgid "Distance between the printed initial layer support structure lines. This setting is calculated by the support density."
  3176. msgstr ""
  3177. #: fdmprinter.def.json
  3178. msgctxt "support_infill_angles label"
  3179. msgid "Support Infill Line Directions"
  3180. msgstr ""
  3181. #: fdmprinter.def.json
  3182. msgctxt "support_infill_angles description"
  3183. msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angle 0 degrees."
  3184. msgstr ""
  3185. #: fdmprinter.def.json
  3186. msgctxt "support_brim_enable label"
  3187. msgid "Enable Support Brim"
  3188. msgstr ""
  3189. #: fdmprinter.def.json
  3190. msgctxt "support_brim_enable description"
  3191. msgid "Generate a brim within the support infill regions of the first layer. This brim is printed underneath the support, not around it. Enabling this setting increases the adhesion of support to the build plate."
  3192. msgstr ""
  3193. #: fdmprinter.def.json
  3194. msgctxt "support_brim_width label"
  3195. msgid "Support Brim Width"
  3196. msgstr ""
  3197. #: fdmprinter.def.json
  3198. msgctxt "support_brim_width description"
  3199. msgid "The width of the brim to print underneath the support. A larger brim enhances adhesion to the build plate, at the cost of some extra material."
  3200. msgstr ""
  3201. #: fdmprinter.def.json
  3202. msgctxt "support_brim_line_count label"
  3203. msgid "Support Brim Line Count"
  3204. msgstr ""
  3205. #: fdmprinter.def.json
  3206. msgctxt "support_brim_line_count description"
  3207. msgid "The number of lines used for the support brim. More brim lines enhance adhesion to the build plate, at the cost of some extra material."
  3208. msgstr ""
  3209. #: fdmprinter.def.json
  3210. msgctxt "support_z_distance label"
  3211. msgid "Support Z Distance"
  3212. msgstr ""
  3213. #: fdmprinter.def.json
  3214. msgctxt "support_z_distance description"
  3215. msgid "Distance from the top/bottom of the support structure to the print. This gap provides clearance to remove the supports after the model is printed. This value is rounded up to a multiple of the layer height."
  3216. msgstr ""
  3217. #: fdmprinter.def.json
  3218. msgctxt "support_top_distance label"
  3219. msgid "Support Top Distance"
  3220. msgstr ""
  3221. #: fdmprinter.def.json
  3222. msgctxt "support_top_distance description"
  3223. msgid "Distance from the top of the support to the print."
  3224. msgstr ""
  3225. #: fdmprinter.def.json
  3226. msgctxt "support_bottom_distance label"
  3227. msgid "Support Bottom Distance"
  3228. msgstr ""
  3229. #: fdmprinter.def.json
  3230. msgctxt "support_bottom_distance description"
  3231. msgid "Distance from the print to the bottom of the support."
  3232. msgstr ""
  3233. #: fdmprinter.def.json
  3234. msgctxt "support_xy_distance label"
  3235. msgid "Support X/Y Distance"
  3236. msgstr ""
  3237. #: fdmprinter.def.json
  3238. msgctxt "support_xy_distance description"
  3239. msgid "Distance of the support structure from the print in the X/Y directions."
  3240. msgstr ""
  3241. #: fdmprinter.def.json
  3242. msgctxt "support_xy_overrides_z label"
  3243. msgid "Support Distance Priority"
  3244. msgstr ""
  3245. #: fdmprinter.def.json
  3246. msgctxt "support_xy_overrides_z description"
  3247. msgid "Whether the Support X/Y Distance overrides the Support Z Distance or vice versa. When X/Y overrides Z the X/Y distance can push away the support from the model, influencing the actual Z distance to the overhang. We can disable this by not applying the X/Y distance around overhangs."
  3248. msgstr ""
  3249. #: fdmprinter.def.json
  3250. msgctxt "support_xy_overrides_z option xy_overrides_z"
  3251. msgid "X/Y overrides Z"
  3252. msgstr ""
  3253. #: fdmprinter.def.json
  3254. msgctxt "support_xy_overrides_z option z_overrides_xy"
  3255. msgid "Z overrides X/Y"
  3256. msgstr ""
  3257. #: fdmprinter.def.json
  3258. msgctxt "support_xy_distance_overhang label"
  3259. msgid "Minimum Support X/Y Distance"
  3260. msgstr ""
  3261. #: fdmprinter.def.json
  3262. msgctxt "support_xy_distance_overhang description"
  3263. msgid "Distance of the support structure from the overhang in the X/Y directions."
  3264. msgstr ""
  3265. #: fdmprinter.def.json
  3266. msgctxt "support_bottom_stair_step_height label"
  3267. msgid "Support Stair Step Height"
  3268. msgstr ""
  3269. #: fdmprinter.def.json
  3270. msgctxt "support_bottom_stair_step_height description"
  3271. msgid "The height of the steps of the stair-like bottom of support resting on the model. A low value makes the support harder to remove, but too high values can lead to unstable support structures. Set to zero to turn off the stair-like behaviour."
  3272. msgstr ""
  3273. #: fdmprinter.def.json
  3274. msgctxt "support_bottom_stair_step_width label"
  3275. msgid "Support Stair Step Maximum Width"
  3276. msgstr ""
  3277. #: fdmprinter.def.json
  3278. msgctxt "support_bottom_stair_step_width description"
  3279. msgid "The maximum width of the steps of the stair-like bottom of support resting on the model. A low value makes the support harder to remove, but too high values can lead to unstable support structures."
  3280. msgstr ""
  3281. #: fdmprinter.def.json
  3282. msgctxt "support_bottom_stair_step_min_slope label"
  3283. msgid "Support Stair Step Minimum Slope Angle"
  3284. msgstr ""
  3285. #: fdmprinter.def.json
  3286. msgctxt "support_bottom_stair_step_min_slope description"
  3287. msgid "The minimum slope of the area for stair-stepping to take effect. Low values should make support easier to remove on shallower slopes, but really low values may result in some very counter-intuitive results on other parts of the model."
  3288. msgstr ""
  3289. #: fdmprinter.def.json
  3290. msgctxt "support_join_distance label"
  3291. msgid "Support Join Distance"
  3292. msgstr ""
  3293. #: fdmprinter.def.json
  3294. msgctxt "support_join_distance description"
  3295. msgid "The maximum distance between support structures in the X/Y directions. When separate structures are closer together than this value, the structures merge into one."
  3296. msgstr ""
  3297. #: fdmprinter.def.json
  3298. msgctxt "support_offset label"
  3299. msgid "Support Horizontal Expansion"
  3300. msgstr ""
  3301. #: fdmprinter.def.json
  3302. msgctxt "support_offset description"
  3303. msgid "Amount of offset applied to all support polygons in each layer. Positive values can smooth out the support areas and result in more sturdy support."
  3304. msgstr ""
  3305. #: fdmprinter.def.json
  3306. msgctxt "support_infill_sparse_thickness label"
  3307. msgid "Support Infill Layer Thickness"
  3308. msgstr ""
  3309. #: fdmprinter.def.json
  3310. msgctxt "support_infill_sparse_thickness description"
  3311. msgid "The thickness per layer of support infill material. This value should always be a multiple of the layer height and is otherwise rounded."
  3312. msgstr ""
  3313. #: fdmprinter.def.json
  3314. msgctxt "gradual_support_infill_steps label"
  3315. msgid "Gradual Support Infill Steps"
  3316. msgstr ""
  3317. #: fdmprinter.def.json
  3318. msgctxt "gradual_support_infill_steps description"
  3319. msgid "Number of times to reduce the support infill density by half when getting further below top surfaces. Areas which are closer to top surfaces get a higher density, up to the Support Infill Density."
  3320. msgstr ""
  3321. #: fdmprinter.def.json
  3322. msgctxt "gradual_support_infill_step_height label"
  3323. msgid "Gradual Support Infill Step Height"
  3324. msgstr ""
  3325. #: fdmprinter.def.json
  3326. msgctxt "gradual_support_infill_step_height description"
  3327. msgid "The height of support infill of a given density before switching to half the density."
  3328. msgstr ""
  3329. #: fdmprinter.def.json
  3330. msgctxt "minimum_support_area label"
  3331. msgid "Minimum Support Area"
  3332. msgstr ""
  3333. #: fdmprinter.def.json
  3334. msgctxt "minimum_support_area description"
  3335. msgid "Minimum area size for support polygons. Polygons which have an area smaller than this value will not be generated."
  3336. msgstr ""
  3337. #: fdmprinter.def.json
  3338. msgctxt "support_interface_enable label"
  3339. msgid "Enable Support Interface"
  3340. msgstr ""
  3341. #: fdmprinter.def.json
  3342. msgctxt "support_interface_enable description"
  3343. msgid "Generate a dense interface between the model and the support. This will create a skin at the top of the support on which the model is printed and at the bottom of the support, where it rests on the model."
  3344. msgstr ""
  3345. #: fdmprinter.def.json
  3346. msgctxt "support_roof_enable label"
  3347. msgid "Enable Support Roof"
  3348. msgstr ""
  3349. #: fdmprinter.def.json
  3350. msgctxt "support_roof_enable description"
  3351. msgid "Generate a dense slab of material between the top of support and the model. This will create a skin between the model and support."
  3352. msgstr ""
  3353. #: fdmprinter.def.json
  3354. msgctxt "support_bottom_enable label"
  3355. msgid "Enable Support Floor"
  3356. msgstr ""
  3357. #: fdmprinter.def.json
  3358. msgctxt "support_bottom_enable description"
  3359. msgid "Generate a dense slab of material between the bottom of the support and the model. This will create a skin between the model and support."
  3360. msgstr ""
  3361. #: fdmprinter.def.json
  3362. msgctxt "support_interface_height label"
  3363. msgid "Support Interface Thickness"
  3364. msgstr ""
  3365. #: fdmprinter.def.json
  3366. msgctxt "support_interface_height description"
  3367. msgid "The thickness of the interface of the support where it touches with the model on the bottom or the top."
  3368. msgstr ""
  3369. #: fdmprinter.def.json
  3370. msgctxt "support_roof_height label"
  3371. msgid "Support Roof Thickness"
  3372. msgstr ""
  3373. #: fdmprinter.def.json
  3374. msgctxt "support_roof_height description"
  3375. msgid "The thickness of the support roofs. This controls the amount of dense layers at the top of the support on which the model rests."
  3376. msgstr ""
  3377. #: fdmprinter.def.json
  3378. msgctxt "support_bottom_height label"
  3379. msgid "Support Floor Thickness"
  3380. msgstr ""
  3381. #: fdmprinter.def.json
  3382. msgctxt "support_bottom_height description"
  3383. msgid "The thickness of the support floors. This controls the number of dense layers that are printed on top of places of a model on which support rests."
  3384. msgstr ""
  3385. #: fdmprinter.def.json
  3386. msgctxt "support_interface_skip_height label"
  3387. msgid "Support Interface Resolution"
  3388. msgstr ""
  3389. #: fdmprinter.def.json
  3390. msgctxt "support_interface_skip_height description"
  3391. msgid "When checking where there's model above and below the support, take steps of the given height. Lower values will slice slower, while higher values may cause normal support to be printed in some places where there should have been support interface."
  3392. msgstr ""
  3393. #: fdmprinter.def.json
  3394. msgctxt "support_interface_density label"
  3395. msgid "Support Interface Density"
  3396. msgstr ""
  3397. #: fdmprinter.def.json
  3398. msgctxt "support_interface_density description"
  3399. msgid "Adjusts the density of the roofs and floors of the support structure. A higher value results in better overhangs, but the supports are harder to remove."
  3400. msgstr ""
  3401. #: fdmprinter.def.json
  3402. msgctxt "support_roof_density label"
  3403. msgid "Support Roof Density"
  3404. msgstr ""
  3405. #: fdmprinter.def.json
  3406. msgctxt "support_roof_density description"
  3407. msgid "The density of the roofs of the support structure. A higher value results in better overhangs, but the supports are harder to remove."
  3408. msgstr ""
  3409. #: fdmprinter.def.json
  3410. msgctxt "support_roof_line_distance label"
  3411. msgid "Support Roof Line Distance"
  3412. msgstr ""
  3413. #: fdmprinter.def.json
  3414. msgctxt "support_roof_line_distance description"
  3415. msgid "Distance between the printed support roof lines. This setting is calculated by the Support Roof Density, but can be adjusted separately."
  3416. msgstr ""
  3417. #: fdmprinter.def.json
  3418. msgctxt "support_bottom_density label"
  3419. msgid "Support Floor Density"
  3420. msgstr ""
  3421. #: fdmprinter.def.json
  3422. msgctxt "support_bottom_density description"
  3423. msgid "The density of the floors of the support structure. A higher value results in better adhesion of the support on top of the model."
  3424. msgstr ""
  3425. #: fdmprinter.def.json
  3426. msgctxt "support_bottom_line_distance label"
  3427. msgid "Support Floor Line Distance"
  3428. msgstr ""
  3429. #: fdmprinter.def.json
  3430. msgctxt "support_bottom_line_distance description"
  3431. msgid "Distance between the printed support floor lines. This setting is calculated by the Support Floor Density, but can be adjusted separately."
  3432. msgstr ""
  3433. #: fdmprinter.def.json
  3434. msgctxt "support_interface_pattern label"
  3435. msgid "Support Interface Pattern"
  3436. msgstr ""
  3437. #: fdmprinter.def.json
  3438. msgctxt "support_interface_pattern description"
  3439. msgid "The pattern with which the interface of the support with the model is printed."
  3440. msgstr ""
  3441. #: fdmprinter.def.json
  3442. msgctxt "support_interface_pattern option lines"
  3443. msgid "Lines"
  3444. msgstr ""
  3445. #: fdmprinter.def.json
  3446. msgctxt "support_interface_pattern option grid"
  3447. msgid "Grid"
  3448. msgstr ""
  3449. #: fdmprinter.def.json
  3450. msgctxt "support_interface_pattern option triangles"
  3451. msgid "Triangles"
  3452. msgstr ""
  3453. #: fdmprinter.def.json
  3454. msgctxt "support_interface_pattern option concentric"
  3455. msgid "Concentric"
  3456. msgstr ""
  3457. #: fdmprinter.def.json
  3458. msgctxt "support_interface_pattern option zigzag"
  3459. msgid "Zig Zag"
  3460. msgstr ""
  3461. #: fdmprinter.def.json
  3462. msgctxt "support_roof_pattern label"
  3463. msgid "Support Roof Pattern"
  3464. msgstr ""
  3465. #: fdmprinter.def.json
  3466. msgctxt "support_roof_pattern description"
  3467. msgid "The pattern with which the roofs of the support are printed."
  3468. msgstr ""
  3469. #: fdmprinter.def.json
  3470. msgctxt "support_roof_pattern option lines"
  3471. msgid "Lines"
  3472. msgstr ""
  3473. #: fdmprinter.def.json
  3474. msgctxt "support_roof_pattern option grid"
  3475. msgid "Grid"
  3476. msgstr ""
  3477. #: fdmprinter.def.json
  3478. msgctxt "support_roof_pattern option triangles"
  3479. msgid "Triangles"
  3480. msgstr ""
  3481. #: fdmprinter.def.json
  3482. msgctxt "support_roof_pattern option concentric"
  3483. msgid "Concentric"
  3484. msgstr ""
  3485. #: fdmprinter.def.json
  3486. msgctxt "support_roof_pattern option zigzag"
  3487. msgid "Zig Zag"
  3488. msgstr ""
  3489. #: fdmprinter.def.json
  3490. msgctxt "support_bottom_pattern label"
  3491. msgid "Support Floor Pattern"
  3492. msgstr ""
  3493. #: fdmprinter.def.json
  3494. msgctxt "support_bottom_pattern description"
  3495. msgid "The pattern with which the floors of the support are printed."
  3496. msgstr ""
  3497. #: fdmprinter.def.json
  3498. msgctxt "support_bottom_pattern option lines"
  3499. msgid "Lines"
  3500. msgstr ""
  3501. #: fdmprinter.def.json
  3502. msgctxt "support_bottom_pattern option grid"
  3503. msgid "Grid"
  3504. msgstr ""
  3505. #: fdmprinter.def.json
  3506. msgctxt "support_bottom_pattern option triangles"
  3507. msgid "Triangles"
  3508. msgstr ""
  3509. #: fdmprinter.def.json
  3510. msgctxt "support_bottom_pattern option concentric"
  3511. msgid "Concentric"
  3512. msgstr ""
  3513. #: fdmprinter.def.json
  3514. msgctxt "support_bottom_pattern option zigzag"
  3515. msgid "Zig Zag"
  3516. msgstr ""
  3517. #: fdmprinter.def.json
  3518. msgctxt "minimum_interface_area label"
  3519. msgid "Minimum Support Interface Area"
  3520. msgstr ""
  3521. #: fdmprinter.def.json
  3522. msgctxt "minimum_interface_area description"
  3523. msgid "Minimum area size for support interface polygons. Polygons which have an area smaller than this value will be printed as normal support."
  3524. msgstr ""
  3525. #: fdmprinter.def.json
  3526. msgctxt "minimum_roof_area label"
  3527. msgid "Minimum Support Roof Area"
  3528. msgstr ""
  3529. #: fdmprinter.def.json
  3530. msgctxt "minimum_roof_area description"
  3531. msgid "Minimum area size for the roofs of the support. Polygons which have an area smaller than this value will be printed as normal support."
  3532. msgstr ""
  3533. #: fdmprinter.def.json
  3534. msgctxt "minimum_bottom_area label"
  3535. msgid "Minimum Support Floor Area"
  3536. msgstr ""
  3537. #: fdmprinter.def.json
  3538. msgctxt "minimum_bottom_area description"
  3539. msgid "Minimum area size for the floors of the support. Polygons which have an area smaller than this value will be printed as normal support."
  3540. msgstr ""
  3541. #: fdmprinter.def.json
  3542. msgctxt "support_interface_offset label"
  3543. msgid "Support Interface Horizontal Expansion"
  3544. msgstr ""
  3545. #: fdmprinter.def.json
  3546. msgctxt "support_interface_offset description"
  3547. msgid "Amount of offset applied to the support interface polygons."
  3548. msgstr ""
  3549. #: fdmprinter.def.json
  3550. msgctxt "support_roof_offset label"
  3551. msgid "Support Roof Horizontal Expansion"
  3552. msgstr ""
  3553. #: fdmprinter.def.json
  3554. msgctxt "support_roof_offset description"
  3555. msgid "Amount of offset applied to the roofs of the support."
  3556. msgstr ""
  3557. #: fdmprinter.def.json
  3558. msgctxt "support_bottom_offset label"
  3559. msgid "Support Floor Horizontal Expansion"
  3560. msgstr ""
  3561. #: fdmprinter.def.json
  3562. msgctxt "support_bottom_offset description"
  3563. msgid "Amount of offset applied to the floors of the support."
  3564. msgstr ""
  3565. #: fdmprinter.def.json
  3566. msgctxt "support_interface_angles label"
  3567. msgid "Support Interface Line Directions"
  3568. msgstr ""
  3569. #: fdmprinter.def.json
  3570. msgctxt "support_interface_angles description"
  3571. msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angles (alternates between 45 and 135 degrees if interfaces are quite thick or 90 degrees)."
  3572. msgstr ""
  3573. #: fdmprinter.def.json
  3574. msgctxt "support_roof_angles label"
  3575. msgid "Support Roof Line Directions"
  3576. msgstr ""
  3577. #: fdmprinter.def.json
  3578. msgctxt "support_roof_angles description"
  3579. msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angles (alternates between 45 and 135 degrees if interfaces are quite thick or 90 degrees)."
  3580. msgstr ""
  3581. #: fdmprinter.def.json
  3582. msgctxt "support_bottom_angles label"
  3583. msgid "Support Floor Line Directions"
  3584. msgstr ""
  3585. #: fdmprinter.def.json
  3586. msgctxt "support_bottom_angles description"
  3587. msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angles (alternates between 45 and 135 degrees if interfaces are quite thick or 90 degrees)."
  3588. msgstr ""
  3589. #: fdmprinter.def.json
  3590. msgctxt "support_fan_enable label"
  3591. msgid "Fan Speed Override"
  3592. msgstr ""
  3593. #: fdmprinter.def.json
  3594. msgctxt "support_fan_enable description"
  3595. msgid "When enabled, the print cooling fan speed is altered for the skin regions immediately above the support."
  3596. msgstr ""
  3597. #: fdmprinter.def.json
  3598. msgctxt "support_supported_skin_fan_speed label"
  3599. msgid "Supported Skin Fan Speed"
  3600. msgstr ""
  3601. #: fdmprinter.def.json
  3602. msgctxt "support_supported_skin_fan_speed description"
  3603. msgid "Percentage fan speed to use when printing the skin regions immediately above the support. Using a high fan speed can make the support easier to remove."
  3604. msgstr ""
  3605. #: fdmprinter.def.json
  3606. msgctxt "support_use_towers label"
  3607. msgid "Use Towers"
  3608. msgstr ""
  3609. #: fdmprinter.def.json
  3610. msgctxt "support_use_towers description"
  3611. msgid "Use specialized towers to support tiny overhang areas. These towers have a larger diameter than the region they support. Near the overhang the towers' diameter decreases, forming a roof."
  3612. msgstr ""
  3613. #: fdmprinter.def.json
  3614. msgctxt "support_tower_diameter label"
  3615. msgid "Tower Diameter"
  3616. msgstr ""
  3617. #: fdmprinter.def.json
  3618. msgctxt "support_tower_diameter description"
  3619. msgid "The diameter of a special tower."
  3620. msgstr ""
  3621. #: fdmprinter.def.json
  3622. msgctxt "support_tower_maximum_supported_diameter label"
  3623. msgid "Maximum Tower-Supported Diameter"
  3624. msgstr ""
  3625. #: fdmprinter.def.json
  3626. msgctxt "support_tower_maximum_supported_diameter description"
  3627. msgid "Maximum diameter in the X/Y directions of a small area which is to be supported by a specialized support tower."
  3628. msgstr ""
  3629. #: fdmprinter.def.json
  3630. msgctxt "support_tower_roof_angle label"
  3631. msgid "Tower Roof Angle"
  3632. msgstr ""
  3633. #: fdmprinter.def.json
  3634. msgctxt "support_tower_roof_angle description"
  3635. msgid "The angle of a rooftop of a tower. A higher value results in pointed tower roofs, a lower value results in flattened tower roofs."
  3636. msgstr ""
  3637. #: fdmprinter.def.json
  3638. msgctxt "support_mesh_drop_down label"
  3639. msgid "Drop Down Support Mesh"
  3640. msgstr ""
  3641. #: fdmprinter.def.json
  3642. msgctxt "support_mesh_drop_down description"
  3643. msgid "Make support everywhere below the support mesh, so that there's no overhang in the support mesh."
  3644. msgstr ""
  3645. #: fdmprinter.def.json
  3646. msgctxt "support_meshes_present label"
  3647. msgid "Scene Has Support Meshes"
  3648. msgstr ""
  3649. #: fdmprinter.def.json
  3650. msgctxt "support_meshes_present description"
  3651. msgid "There are support meshes present in the scene. This setting is controlled by Cura."
  3652. msgstr ""
  3653. #: fdmprinter.def.json
  3654. msgctxt "platform_adhesion label"
  3655. msgid "Build Plate Adhesion"
  3656. msgstr ""
  3657. #: fdmprinter.def.json
  3658. msgctxt "platform_adhesion description"
  3659. msgid "Adhesion"
  3660. msgstr ""
  3661. #: fdmprinter.def.json
  3662. msgctxt "prime_blob_enable label"
  3663. msgid "Enable Prime Blob"
  3664. msgstr ""
  3665. #: fdmprinter.def.json
  3666. msgctxt "prime_blob_enable description"
  3667. msgid "Whether to prime the filament with a blob before printing. Turning this setting on will ensure that the extruder will have material ready at the nozzle before printing. Printing Brim or Skirt can act like priming too, in which case turning this setting off saves some time."
  3668. msgstr ""
  3669. #: fdmprinter.def.json
  3670. msgctxt "extruder_prime_pos_x label"
  3671. msgid "Extruder Prime X Position"
  3672. msgstr ""
  3673. #: fdmprinter.def.json
  3674. msgctxt "extruder_prime_pos_x description"
  3675. msgid "The X coordinate of the position where the nozzle primes at the start of printing."
  3676. msgstr ""
  3677. #: fdmprinter.def.json
  3678. msgctxt "extruder_prime_pos_y label"
  3679. msgid "Extruder Prime Y Position"
  3680. msgstr ""
  3681. #: fdmprinter.def.json
  3682. msgctxt "extruder_prime_pos_y description"
  3683. msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
  3684. msgstr ""
  3685. #: fdmprinter.def.json
  3686. msgctxt "adhesion_type label"
  3687. msgid "Build Plate Adhesion Type"
  3688. msgstr ""
  3689. #: fdmprinter.def.json
  3690. msgctxt "adhesion_type description"
  3691. msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model."
  3692. msgstr ""
  3693. #: fdmprinter.def.json
  3694. msgctxt "adhesion_type option skirt"
  3695. msgid "Skirt"
  3696. msgstr ""
  3697. #: fdmprinter.def.json
  3698. msgctxt "adhesion_type option brim"
  3699. msgid "Brim"
  3700. msgstr ""
  3701. #: fdmprinter.def.json
  3702. msgctxt "adhesion_type option raft"
  3703. msgid "Raft"
  3704. msgstr ""
  3705. #: fdmprinter.def.json
  3706. msgctxt "adhesion_type option none"
  3707. msgid "None"
  3708. msgstr ""
  3709. #: fdmprinter.def.json
  3710. msgctxt "adhesion_extruder_nr label"
  3711. msgid "Build Plate Adhesion Extruder"
  3712. msgstr ""
  3713. #: fdmprinter.def.json
  3714. msgctxt "adhesion_extruder_nr description"
  3715. msgid "The extruder train to use for printing the skirt/brim/raft. This is used in multi-extrusion."
  3716. msgstr ""
  3717. #: fdmprinter.def.json
  3718. msgctxt "skirt_brim_extruder_nr label"
  3719. msgid "Skirt/Brim Extruder"
  3720. msgstr ""
  3721. #: fdmprinter.def.json
  3722. msgctxt "skirt_brim_extruder_nr description"
  3723. msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
  3724. msgstr ""
  3725. #: fdmprinter.def.json
  3726. msgctxt "raft_base_extruder_nr label"
  3727. msgid "Raft Base Extruder"
  3728. msgstr ""
  3729. #: fdmprinter.def.json
  3730. msgctxt "raft_base_extruder_nr description"
  3731. msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
  3732. msgstr ""
  3733. #: fdmprinter.def.json
  3734. msgctxt "raft_interface_extruder_nr label"
  3735. msgid "Raft Middle Extruder"
  3736. msgstr ""
  3737. #: fdmprinter.def.json
  3738. msgctxt "raft_interface_extruder_nr description"
  3739. msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
  3740. msgstr ""
  3741. #: fdmprinter.def.json
  3742. msgctxt "raft_surface_extruder_nr label"
  3743. msgid "Raft Top Extruder"
  3744. msgstr ""
  3745. #: fdmprinter.def.json
  3746. msgctxt "raft_surface_extruder_nr description"
  3747. msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
  3748. msgstr ""
  3749. #: fdmprinter.def.json
  3750. msgctxt "skirt_line_count label"
  3751. msgid "Skirt Line Count"
  3752. msgstr ""
  3753. #: fdmprinter.def.json
  3754. msgctxt "skirt_line_count description"
  3755. msgid "Multiple skirt lines help to prime your extrusion better for small models. Setting this to 0 will disable the skirt."
  3756. msgstr ""
  3757. #: fdmprinter.def.json
  3758. msgctxt "skirt_gap label"
  3759. msgid "Skirt Distance"
  3760. msgstr ""
  3761. #: fdmprinter.def.json
  3762. msgctxt "skirt_gap description"
  3763. msgid "The horizontal distance between the skirt and the first layer of the print.\nThis is the minimum distance. Multiple skirt lines will extend outwards from this distance."
  3764. msgstr ""
  3765. #: fdmprinter.def.json
  3766. msgctxt "skirt_brim_minimal_length label"
  3767. msgid "Skirt/Brim Minimum Length"
  3768. msgstr ""
  3769. #: fdmprinter.def.json
  3770. msgctxt "skirt_brim_minimal_length description"
  3771. msgid "The minimum length of the skirt or brim. If this length is not reached by all skirt or brim lines together, more skirt or brim lines will be added until the minimum length is reached. Note: If the line count is set to 0 this is ignored."
  3772. msgstr ""
  3773. #: fdmprinter.def.json
  3774. msgctxt "brim_width label"
  3775. msgid "Brim Width"
  3776. msgstr ""
  3777. #: fdmprinter.def.json
  3778. msgctxt "brim_width description"
  3779. msgid "The distance from the model to the outermost brim line. A larger brim enhances adhesion to the build plate, but also reduces the effective print area."
  3780. msgstr ""
  3781. #: fdmprinter.def.json
  3782. msgctxt "brim_line_count label"
  3783. msgid "Brim Line Count"
  3784. msgstr ""
  3785. #: fdmprinter.def.json
  3786. msgctxt "brim_line_count description"
  3787. msgid "The number of lines used for a brim. More brim lines enhance adhesion to the build plate, but also reduces the effective print area."
  3788. msgstr ""
  3789. #: fdmprinter.def.json
  3790. msgctxt "brim_gap label"
  3791. msgid "Brim Distance"
  3792. msgstr ""
  3793. #: fdmprinter.def.json
  3794. msgctxt "brim_gap description"
  3795. msgid "The horizontal distance between the first brim line and the outline of the first layer of the print. A small gap can make the brim easier to remove while still providing the thermal benefits."
  3796. msgstr ""
  3797. #: fdmprinter.def.json
  3798. msgctxt "brim_replaces_support label"
  3799. msgid "Brim Replaces Support"
  3800. msgstr ""
  3801. #: fdmprinter.def.json
  3802. msgctxt "brim_replaces_support description"
  3803. msgid "Enforce brim to be printed around the model even if that space would otherwise be occupied by support. This replaces some regions of the first layer of support by brim regions."
  3804. msgstr ""
  3805. #: fdmprinter.def.json
  3806. msgctxt "brim_outside_only label"
  3807. msgid "Brim Only on Outside"
  3808. msgstr ""
  3809. #: fdmprinter.def.json
  3810. msgctxt "brim_outside_only description"
  3811. msgid "Only print the brim on the outside of the model. This reduces the amount of brim you need to remove afterwards, while it doesn't reduce the bed adhesion that much."
  3812. msgstr ""
  3813. #: fdmprinter.def.json
  3814. msgctxt "brim_inside_margin label"
  3815. msgid "Brim Inside Avoid Margin"
  3816. msgstr ""
  3817. #: fdmprinter.def.json
  3818. msgctxt "brim_inside_margin description"
  3819. msgid "If brim is only on outside then parts fully enclosed inside another part will get a brim which might overlap with the internal holes of the outer part. This setting controls how far to stay away from those internal holes. Set to a high value to prevent any brim from being generated for parts enclosed within the holes of other parts."
  3820. msgstr ""
  3821. #: fdmprinter.def.json
  3822. msgctxt "raft_margin label"
  3823. msgid "Raft Extra Margin"
  3824. msgstr ""
  3825. #: fdmprinter.def.json
  3826. msgctxt "raft_margin description"
  3827. msgid "If the raft is enabled, this is the extra raft area around the model which is also given a raft. Increasing this margin will create a stronger raft while using more material and leaving less area for your print."
  3828. msgstr ""
  3829. #: fdmprinter.def.json
  3830. msgctxt "raft_smoothing label"
  3831. msgid "Raft Smoothing"
  3832. msgstr ""
  3833. #: fdmprinter.def.json
  3834. msgctxt "raft_smoothing description"
  3835. msgid "This setting controls how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle."
  3836. msgstr ""
  3837. #: fdmprinter.def.json
  3838. msgctxt "raft_airgap label"
  3839. msgid "Raft Air Gap"
  3840. msgstr ""
  3841. #: fdmprinter.def.json
  3842. msgctxt "raft_airgap description"
  3843. msgid "The gap between the final raft layer and the first layer of the model. Only the first layer is raised by this amount to lower the bonding between the raft layer and the model. Makes it easier to peel off the raft."
  3844. msgstr ""
  3845. #: fdmprinter.def.json
  3846. msgctxt "layer_0_z_overlap label"
  3847. msgid "Initial Layer Z Overlap"
  3848. msgstr ""
  3849. #: fdmprinter.def.json
  3850. msgctxt "layer_0_z_overlap description"
  3851. msgid "Make the first and second layer of the model overlap in the Z direction to compensate for the filament lost in the airgap. All models above the first model layer will be shifted down by this amount."
  3852. msgstr ""
  3853. #: fdmprinter.def.json
  3854. msgctxt "raft_surface_layers label"
  3855. msgid "Raft Top Layers"
  3856. msgstr ""
  3857. #: fdmprinter.def.json
  3858. msgctxt "raft_surface_layers description"
  3859. msgid "The number of top layers on top of the 2nd raft layer. These are fully filled layers that the model sits on. 2 layers result in a smoother top surface than 1."
  3860. msgstr ""
  3861. #: fdmprinter.def.json
  3862. msgctxt "raft_surface_thickness label"
  3863. msgid "Raft Top Layer Thickness"
  3864. msgstr ""
  3865. #: fdmprinter.def.json
  3866. msgctxt "raft_surface_thickness description"
  3867. msgid "Layer thickness of the top raft layers."
  3868. msgstr ""
  3869. #: fdmprinter.def.json
  3870. msgctxt "raft_surface_line_width label"
  3871. msgid "Raft Top Line Width"
  3872. msgstr ""
  3873. #: fdmprinter.def.json
  3874. msgctxt "raft_surface_line_width description"
  3875. msgid "Width of the lines in the top surface of the raft. These can be thin lines so that the top of the raft becomes smooth."
  3876. msgstr ""
  3877. #: fdmprinter.def.json
  3878. msgctxt "raft_surface_line_spacing label"
  3879. msgid "Raft Top Spacing"
  3880. msgstr ""
  3881. #: fdmprinter.def.json
  3882. msgctxt "raft_surface_line_spacing description"
  3883. msgid "The distance between the raft lines for the top raft layers. The spacing should be equal to the line width, so that the surface is solid."
  3884. msgstr ""
  3885. #: fdmprinter.def.json
  3886. msgctxt "raft_interface_layers label"
  3887. msgid "Raft Middle Layers"
  3888. msgstr ""
  3889. #: fdmprinter.def.json
  3890. msgctxt "raft_interface_layers description"
  3891. msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
  3892. msgstr ""
  3893. #: fdmprinter.def.json
  3894. msgctxt "raft_interface_thickness label"
  3895. msgid "Raft Middle Thickness"
  3896. msgstr ""
  3897. #: fdmprinter.def.json
  3898. msgctxt "raft_interface_thickness description"
  3899. msgid "Layer thickness of the middle raft layer."
  3900. msgstr ""
  3901. #: fdmprinter.def.json
  3902. msgctxt "raft_interface_line_width label"
  3903. msgid "Raft Middle Line Width"
  3904. msgstr ""
  3905. #: fdmprinter.def.json
  3906. msgctxt "raft_interface_line_width description"
  3907. msgid "Width of the lines in the middle raft layer. Making the second layer extrude more causes the lines to stick to the build plate."
  3908. msgstr ""
  3909. #: fdmprinter.def.json
  3910. msgctxt "raft_interface_line_spacing label"
  3911. msgid "Raft Middle Spacing"
  3912. msgstr ""
  3913. #: fdmprinter.def.json
  3914. msgctxt "raft_interface_line_spacing description"
  3915. msgid "The distance between the raft lines for the middle raft layer. The spacing of the middle should be quite wide, while being dense enough to support the top raft layers."
  3916. msgstr ""
  3917. #: fdmprinter.def.json
  3918. msgctxt "raft_base_thickness label"
  3919. msgid "Raft Base Thickness"
  3920. msgstr ""
  3921. #: fdmprinter.def.json
  3922. msgctxt "raft_base_thickness description"
  3923. msgid "Layer thickness of the base raft layer. This should be a thick layer which sticks firmly to the printer build plate."
  3924. msgstr ""
  3925. #: fdmprinter.def.json
  3926. msgctxt "raft_base_line_width label"
  3927. msgid "Raft Base Line Width"
  3928. msgstr ""
  3929. #: fdmprinter.def.json
  3930. msgctxt "raft_base_line_width description"
  3931. msgid "Width of the lines in the base raft layer. These should be thick lines to assist in build plate adhesion."
  3932. msgstr ""
  3933. #: fdmprinter.def.json
  3934. msgctxt "raft_base_line_spacing label"
  3935. msgid "Raft Base Line Spacing"
  3936. msgstr ""
  3937. #: fdmprinter.def.json
  3938. msgctxt "raft_base_line_spacing description"
  3939. msgid "The distance between the raft lines for the base raft layer. Wide spacing makes for easy removal of the raft from the build plate."
  3940. msgstr ""
  3941. #: fdmprinter.def.json
  3942. msgctxt "raft_speed label"
  3943. msgid "Raft Print Speed"
  3944. msgstr ""
  3945. #: fdmprinter.def.json
  3946. msgctxt "raft_speed description"
  3947. msgid "The speed at which the raft is printed."
  3948. msgstr ""
  3949. #: fdmprinter.def.json
  3950. msgctxt "raft_surface_speed label"
  3951. msgid "Raft Top Print Speed"
  3952. msgstr ""
  3953. #: fdmprinter.def.json
  3954. msgctxt "raft_surface_speed description"
  3955. msgid "The speed at which the top raft layers are printed. These should be printed a bit slower, so that the nozzle can slowly smooth out adjacent surface lines."
  3956. msgstr ""
  3957. #: fdmprinter.def.json
  3958. msgctxt "raft_interface_speed label"
  3959. msgid "Raft Middle Print Speed"
  3960. msgstr ""
  3961. #: fdmprinter.def.json
  3962. msgctxt "raft_interface_speed description"
  3963. msgid "The speed at which the middle raft layer is printed. This should be printed quite slowly, as the volume of material coming out of the nozzle is quite high."
  3964. msgstr ""
  3965. #: fdmprinter.def.json
  3966. msgctxt "raft_base_speed label"
  3967. msgid "Raft Base Print Speed"
  3968. msgstr ""
  3969. #: fdmprinter.def.json
  3970. msgctxt "raft_base_speed description"
  3971. msgid "The speed at which the base raft layer is printed. This should be printed quite slowly, as the volume of material coming out of the nozzle is quite high."
  3972. msgstr ""
  3973. #: fdmprinter.def.json
  3974. msgctxt "raft_acceleration label"
  3975. msgid "Raft Print Acceleration"
  3976. msgstr ""
  3977. #: fdmprinter.def.json
  3978. msgctxt "raft_acceleration description"
  3979. msgid "The acceleration with which the raft is printed."
  3980. msgstr ""
  3981. #: fdmprinter.def.json
  3982. msgctxt "raft_surface_acceleration label"
  3983. msgid "Raft Top Print Acceleration"
  3984. msgstr ""
  3985. #: fdmprinter.def.json
  3986. msgctxt "raft_surface_acceleration description"
  3987. msgid "The acceleration with which the top raft layers are printed."
  3988. msgstr ""
  3989. #: fdmprinter.def.json
  3990. msgctxt "raft_interface_acceleration label"
  3991. msgid "Raft Middle Print Acceleration"
  3992. msgstr ""
  3993. #: fdmprinter.def.json
  3994. msgctxt "raft_interface_acceleration description"
  3995. msgid "The acceleration with which the middle raft layer is printed."
  3996. msgstr ""
  3997. #: fdmprinter.def.json
  3998. msgctxt "raft_base_acceleration label"
  3999. msgid "Raft Base Print Acceleration"
  4000. msgstr ""
  4001. #: fdmprinter.def.json
  4002. msgctxt "raft_base_acceleration description"
  4003. msgid "The acceleration with which the base raft layer is printed."
  4004. msgstr ""
  4005. #: fdmprinter.def.json
  4006. msgctxt "raft_jerk label"
  4007. msgid "Raft Print Jerk"
  4008. msgstr ""
  4009. #: fdmprinter.def.json
  4010. msgctxt "raft_jerk description"
  4011. msgid "The jerk with which the raft is printed."
  4012. msgstr ""
  4013. #: fdmprinter.def.json
  4014. msgctxt "raft_surface_jerk label"
  4015. msgid "Raft Top Print Jerk"
  4016. msgstr ""
  4017. #: fdmprinter.def.json
  4018. msgctxt "raft_surface_jerk description"
  4019. msgid "The jerk with which the top raft layers are printed."
  4020. msgstr ""
  4021. #: fdmprinter.def.json
  4022. msgctxt "raft_interface_jerk label"
  4023. msgid "Raft Middle Print Jerk"
  4024. msgstr ""
  4025. #: fdmprinter.def.json
  4026. msgctxt "raft_interface_jerk description"
  4027. msgid "The jerk with which the middle raft layer is printed."
  4028. msgstr ""
  4029. #: fdmprinter.def.json
  4030. msgctxt "raft_base_jerk label"
  4031. msgid "Raft Base Print Jerk"
  4032. msgstr ""
  4033. #: fdmprinter.def.json
  4034. msgctxt "raft_base_jerk description"
  4035. msgid "The jerk with which the base raft layer is printed."
  4036. msgstr ""
  4037. #: fdmprinter.def.json
  4038. msgctxt "raft_fan_speed label"
  4039. msgid "Raft Fan Speed"
  4040. msgstr ""
  4041. #: fdmprinter.def.json
  4042. msgctxt "raft_fan_speed description"
  4043. msgid "The fan speed for the raft."
  4044. msgstr ""
  4045. #: fdmprinter.def.json
  4046. msgctxt "raft_surface_fan_speed label"
  4047. msgid "Raft Top Fan Speed"
  4048. msgstr ""
  4049. #: fdmprinter.def.json
  4050. msgctxt "raft_surface_fan_speed description"
  4051. msgid "The fan speed for the top raft layers."
  4052. msgstr ""
  4053. #: fdmprinter.def.json
  4054. msgctxt "raft_interface_fan_speed label"
  4055. msgid "Raft Middle Fan Speed"
  4056. msgstr ""
  4057. #: fdmprinter.def.json
  4058. msgctxt "raft_interface_fan_speed description"
  4059. msgid "The fan speed for the middle raft layer."
  4060. msgstr ""
  4061. #: fdmprinter.def.json
  4062. msgctxt "raft_base_fan_speed label"
  4063. msgid "Raft Base Fan Speed"
  4064. msgstr ""
  4065. #: fdmprinter.def.json
  4066. msgctxt "raft_base_fan_speed description"
  4067. msgid "The fan speed for the base raft layer."
  4068. msgstr ""
  4069. #: fdmprinter.def.json
  4070. msgctxt "dual label"
  4071. msgid "Dual Extrusion"
  4072. msgstr ""
  4073. #: fdmprinter.def.json
  4074. msgctxt "dual description"
  4075. msgid "Settings used for printing with multiple extruders."
  4076. msgstr ""
  4077. #: fdmprinter.def.json
  4078. msgctxt "prime_tower_enable label"
  4079. msgid "Enable Prime Tower"
  4080. msgstr ""
  4081. #: fdmprinter.def.json
  4082. msgctxt "prime_tower_enable description"
  4083. msgid "Print a tower next to the print which serves to prime the material after each nozzle switch."
  4084. msgstr ""
  4085. #: fdmprinter.def.json
  4086. msgctxt "prime_tower_size label"
  4087. msgid "Prime Tower Size"
  4088. msgstr ""
  4089. #: fdmprinter.def.json
  4090. msgctxt "prime_tower_size description"
  4091. msgid "The width of the prime tower."
  4092. msgstr ""
  4093. #: fdmprinter.def.json
  4094. msgctxt "prime_tower_min_volume label"
  4095. msgid "Prime Tower Minimum Volume"
  4096. msgstr ""
  4097. #: fdmprinter.def.json
  4098. msgctxt "prime_tower_min_volume description"
  4099. msgid "The minimum volume for each layer of the prime tower in order to purge enough material."
  4100. msgstr ""
  4101. #: fdmprinter.def.json
  4102. msgctxt "prime_tower_position_x label"
  4103. msgid "Prime Tower X Position"
  4104. msgstr ""
  4105. #: fdmprinter.def.json
  4106. msgctxt "prime_tower_position_x description"
  4107. msgid "The x coordinate of the position of the prime tower."
  4108. msgstr ""
  4109. #: fdmprinter.def.json
  4110. msgctxt "prime_tower_position_y label"
  4111. msgid "Prime Tower Y Position"
  4112. msgstr ""
  4113. #: fdmprinter.def.json
  4114. msgctxt "prime_tower_position_y description"
  4115. msgid "The y coordinate of the position of the prime tower."
  4116. msgstr ""
  4117. #: fdmprinter.def.json
  4118. msgctxt "prime_tower_wipe_enabled label"
  4119. msgid "Wipe Inactive Nozzle on Prime Tower"
  4120. msgstr ""
  4121. #: fdmprinter.def.json
  4122. msgctxt "prime_tower_wipe_enabled description"
  4123. msgid "After printing the prime tower with one nozzle, wipe the oozed material from the other nozzle off on the prime tower."
  4124. msgstr ""
  4125. #: fdmprinter.def.json
  4126. msgctxt "prime_tower_brim_enable label"
  4127. msgid "Prime Tower Brim"
  4128. msgstr ""
  4129. #: fdmprinter.def.json
  4130. msgctxt "prime_tower_brim_enable description"
  4131. msgid "Prime-towers might need the extra adhesion afforded by a brim even if the model doesn't. Presently can't be used with the 'Raft' adhesion-type."
  4132. msgstr ""
  4133. #: fdmprinter.def.json
  4134. msgctxt "ooze_shield_enabled label"
  4135. msgid "Enable Ooze Shield"
  4136. msgstr ""
  4137. #: fdmprinter.def.json
  4138. msgctxt "ooze_shield_enabled description"
  4139. msgid "Enable exterior ooze shield. This will create a shell around the model which is likely to wipe a second nozzle if it's at the same height as the first nozzle."
  4140. msgstr ""
  4141. #: fdmprinter.def.json
  4142. msgctxt "ooze_shield_angle label"
  4143. msgid "Ooze Shield Angle"
  4144. msgstr ""
  4145. #: fdmprinter.def.json
  4146. msgctxt "ooze_shield_angle description"
  4147. msgid "The maximum angle a part in the ooze shield will have. With 0 degrees being vertical, and 90 degrees being horizontal. A smaller angle leads to less failed ooze shields, but more material."
  4148. msgstr ""
  4149. #: fdmprinter.def.json
  4150. msgctxt "ooze_shield_dist label"
  4151. msgid "Ooze Shield Distance"
  4152. msgstr ""
  4153. #: fdmprinter.def.json
  4154. msgctxt "ooze_shield_dist description"
  4155. msgid "Distance of the ooze shield from the print, in the X/Y directions."
  4156. msgstr ""
  4157. #: fdmprinter.def.json
  4158. msgctxt "switch_extruder_retraction_amount label"
  4159. msgid "Nozzle Switch Retraction Distance"
  4160. msgstr ""
  4161. #: fdmprinter.def.json
  4162. msgctxt "switch_extruder_retraction_amount description"
  4163. msgid "The amount of retraction when switching extruders. Set to 0 for no retraction at all. This should generally be the same as the length of the heat zone."
  4164. msgstr ""
  4165. #: fdmprinter.def.json
  4166. msgctxt "switch_extruder_retraction_speeds label"
  4167. msgid "Nozzle Switch Retraction Speed"
  4168. msgstr ""
  4169. #: fdmprinter.def.json
  4170. msgctxt "switch_extruder_retraction_speeds description"
  4171. msgid "The speed at which the filament is retracted. A higher retraction speed works better, but a very high retraction speed can lead to filament grinding."
  4172. msgstr ""
  4173. #: fdmprinter.def.json
  4174. msgctxt "switch_extruder_retraction_speed label"
  4175. msgid "Nozzle Switch Retract Speed"
  4176. msgstr ""
  4177. #: fdmprinter.def.json
  4178. msgctxt "switch_extruder_retraction_speed description"
  4179. msgid "The speed at which the filament is retracted during a nozzle switch retract."
  4180. msgstr ""
  4181. #: fdmprinter.def.json
  4182. msgctxt "switch_extruder_prime_speed label"
  4183. msgid "Nozzle Switch Prime Speed"
  4184. msgstr ""
  4185. #: fdmprinter.def.json
  4186. msgctxt "switch_extruder_prime_speed description"
  4187. msgid "The speed at which the filament is pushed back after a nozzle switch retraction."
  4188. msgstr ""
  4189. #: fdmprinter.def.json
  4190. msgctxt "switch_extruder_extra_prime_amount label"
  4191. msgid "Nozzle Switch Extra Prime Amount"
  4192. msgstr ""
  4193. #: fdmprinter.def.json
  4194. msgctxt "switch_extruder_extra_prime_amount description"
  4195. msgid "Extra material to prime after nozzle switching."
  4196. msgstr ""
  4197. #: fdmprinter.def.json
  4198. msgctxt "meshfix label"
  4199. msgid "Mesh Fixes"
  4200. msgstr ""
  4201. #: fdmprinter.def.json
  4202. msgctxt "meshfix description"
  4203. msgid "Make the meshes more suited for 3D printing."
  4204. msgstr ""
  4205. #: fdmprinter.def.json
  4206. msgctxt "meshfix_union_all label"
  4207. msgid "Union Overlapping Volumes"
  4208. msgstr ""
  4209. #: fdmprinter.def.json
  4210. msgctxt "meshfix_union_all description"
  4211. msgid "Ignore the internal geometry arising from overlapping volumes within a mesh and print the volumes as one. This may cause unintended internal cavities to disappear."
  4212. msgstr ""
  4213. #: fdmprinter.def.json
  4214. msgctxt "meshfix_union_all_remove_holes label"
  4215. msgid "Remove All Holes"
  4216. msgstr ""
  4217. #: fdmprinter.def.json
  4218. msgctxt "meshfix_union_all_remove_holes description"
  4219. msgid "Remove the holes in each layer and keep only the outside shape. This will ignore any invisible internal geometry. However, it also ignores layer holes which can be viewed from above or below."
  4220. msgstr ""
  4221. #: fdmprinter.def.json
  4222. msgctxt "meshfix_extensive_stitching label"
  4223. msgid "Extensive Stitching"
  4224. msgstr ""
  4225. #: fdmprinter.def.json
  4226. msgctxt "meshfix_extensive_stitching description"
  4227. msgid "Extensive stitching tries to stitch up open holes in the mesh by closing the hole with touching polygons. This option can introduce a lot of processing time."
  4228. msgstr ""
  4229. #: fdmprinter.def.json
  4230. msgctxt "meshfix_keep_open_polygons label"
  4231. msgid "Keep Disconnected Faces"
  4232. msgstr ""
  4233. #: fdmprinter.def.json
  4234. msgctxt "meshfix_keep_open_polygons description"
  4235. msgid "Normally Cura tries to stitch up small holes in the mesh and remove parts of a layer with big holes. Enabling this option keeps those parts which cannot be stitched. This option should be used as a last resort option when everything else fails to produce proper g-code."
  4236. msgstr ""
  4237. #: fdmprinter.def.json
  4238. msgctxt "multiple_mesh_overlap label"
  4239. msgid "Merged Meshes Overlap"
  4240. msgstr ""
  4241. #: fdmprinter.def.json
  4242. msgctxt "multiple_mesh_overlap description"
  4243. msgid "Make meshes which are touching each other overlap a bit. This makes them bond together better."
  4244. msgstr ""
  4245. #: fdmprinter.def.json
  4246. msgctxt "carve_multiple_volumes label"
  4247. msgid "Remove Mesh Intersection"
  4248. msgstr ""
  4249. #: fdmprinter.def.json
  4250. msgctxt "carve_multiple_volumes description"
  4251. msgid "Remove areas where multiple meshes are overlapping with each other. This may be used if merged dual material objects overlap with each other."
  4252. msgstr ""
  4253. #: fdmprinter.def.json
  4254. msgctxt "alternate_carve_order label"
  4255. msgid "Alternate Mesh Removal"
  4256. msgstr ""
  4257. #: fdmprinter.def.json
  4258. msgctxt "alternate_carve_order description"
  4259. msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
  4260. msgstr ""
  4261. #: fdmprinter.def.json
  4262. msgctxt "remove_empty_first_layers label"
  4263. msgid "Remove Empty First Layers"
  4264. msgstr ""
  4265. #: fdmprinter.def.json
  4266. msgctxt "remove_empty_first_layers description"
  4267. msgid "Remove empty layers beneath the first printed layer if they are present. Disabling this setting can cause empty first layers if the Slicing Tolerance setting is set to Exclusive or Middle."
  4268. msgstr ""
  4269. #: fdmprinter.def.json
  4270. msgctxt "meshfix_maximum_resolution label"
  4271. msgid "Maximum Resolution"
  4272. msgstr ""
  4273. #: fdmprinter.def.json
  4274. msgctxt "meshfix_maximum_resolution description"
  4275. msgid "The minimum size of a line segment after slicing. If you increase this, the mesh will have a lower resolution. This may allow the printer to keep up with the speed it has to process g-code and will increase slice speed by removing details of the mesh that it can't process anyway."
  4276. msgstr ""
  4277. #: fdmprinter.def.json
  4278. msgctxt "meshfix_maximum_travel_resolution label"
  4279. msgid "Maximum Travel Resolution"
  4280. msgstr ""
  4281. #: fdmprinter.def.json
  4282. msgctxt "meshfix_maximum_travel_resolution description"
  4283. msgid "The minimum size of a travel line segment after slicing. If you increase this, the travel moves will have less smooth corners. This may allow the printer to keep up with the speed it has to process g-code, but it may cause model avoidance to become less accurate."
  4284. msgstr ""
  4285. #: fdmprinter.def.json
  4286. msgctxt "meshfix_maximum_deviation label"
  4287. msgid "Maximum Deviation"
  4288. msgstr ""
  4289. #: fdmprinter.def.json
  4290. msgctxt "meshfix_maximum_deviation description"
  4291. msgid "The maximum deviation allowed when reducing the resolution for the Maximum Resolution setting. If you increase this, the print will be less accurate, but the g-code will be smaller. Maximum Deviation is a limit for Maximum Resolution, so if the two conflict the Maximum Deviation will always be held true."
  4292. msgstr ""
  4293. #: fdmprinter.def.json
  4294. msgctxt "meshfix_maximum_extrusion_area_deviation label"
  4295. msgid "Maximum Extrusion Area Deviation"
  4296. msgstr ""
  4297. #: fdmprinter.def.json
  4298. msgctxt "meshfix_maximum_extrusion_area_deviation description"
  4299. msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
  4300. msgstr ""
  4301. #: fdmprinter.def.json
  4302. msgctxt "blackmagic label"
  4303. msgid "Special Modes"
  4304. msgstr ""
  4305. #: fdmprinter.def.json
  4306. msgctxt "blackmagic description"
  4307. msgid "Non-traditional ways to print your models."
  4308. msgstr ""
  4309. #: fdmprinter.def.json
  4310. msgctxt "print_sequence label"
  4311. msgid "Print Sequence"
  4312. msgstr ""
  4313. #: fdmprinter.def.json
  4314. msgctxt "print_sequence description"
  4315. msgid "Whether to print all models one layer at a time or to wait for one model to finish, before moving on to the next. One at a time mode is possible if a) only one extruder is enabled and b) all models are separated in such a way that the whole print head can move in between and all models are lower than the distance between the nozzle and the X/Y axes."
  4316. msgstr ""
  4317. #: fdmprinter.def.json
  4318. msgctxt "print_sequence option all_at_once"
  4319. msgid "All at Once"
  4320. msgstr ""
  4321. #: fdmprinter.def.json
  4322. msgctxt "print_sequence option one_at_a_time"
  4323. msgid "One at a Time"
  4324. msgstr ""
  4325. #: fdmprinter.def.json
  4326. msgctxt "infill_mesh label"
  4327. msgid "Infill Mesh"
  4328. msgstr ""
  4329. #: fdmprinter.def.json
  4330. msgctxt "infill_mesh description"
  4331. msgid "Use this mesh to modify the infill of other meshes with which it overlaps. Replaces infill regions of other meshes with regions for this mesh. It's suggested to only print one Wall and no Top/Bottom Skin for this mesh."
  4332. msgstr ""
  4333. #: fdmprinter.def.json
  4334. msgctxt "infill_mesh_order label"
  4335. msgid "Mesh Processing Rank"
  4336. msgstr ""
  4337. #: fdmprinter.def.json
  4338. msgctxt "infill_mesh_order description"
  4339. msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
  4340. msgstr ""
  4341. #: fdmprinter.def.json
  4342. msgctxt "cutting_mesh label"
  4343. msgid "Cutting Mesh"
  4344. msgstr ""
  4345. #: fdmprinter.def.json
  4346. msgctxt "cutting_mesh description"
  4347. msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder."
  4348. msgstr ""
  4349. #: fdmprinter.def.json
  4350. msgctxt "mold_enabled label"
  4351. msgid "Mold"
  4352. msgstr ""
  4353. #: fdmprinter.def.json
  4354. msgctxt "mold_enabled description"
  4355. msgid "Print models as a mold, which can be cast in order to get a model which resembles the models on the build plate."
  4356. msgstr ""
  4357. #: fdmprinter.def.json
  4358. msgctxt "mold_width label"
  4359. msgid "Minimal Mold Width"
  4360. msgstr ""
  4361. #: fdmprinter.def.json
  4362. msgctxt "mold_width description"
  4363. msgid "The minimal distance between the outside of the mold and the outside of the model."
  4364. msgstr ""
  4365. #: fdmprinter.def.json
  4366. msgctxt "mold_roof_height label"
  4367. msgid "Mold Roof Height"
  4368. msgstr ""
  4369. #: fdmprinter.def.json
  4370. msgctxt "mold_roof_height description"
  4371. msgid "The height above horizontal parts in your model which to print mold."
  4372. msgstr ""
  4373. #: fdmprinter.def.json
  4374. msgctxt "mold_angle label"
  4375. msgid "Mold Angle"
  4376. msgstr ""
  4377. #: fdmprinter.def.json
  4378. msgctxt "mold_angle description"
  4379. msgid "The angle of overhang of the outer walls created for the mold. 0° will make the outer shell of the mold vertical, while 90° will make the outside of the model follow the contour of the model."
  4380. msgstr ""
  4381. #: fdmprinter.def.json
  4382. msgctxt "support_mesh label"
  4383. msgid "Support Mesh"
  4384. msgstr ""
  4385. #: fdmprinter.def.json
  4386. msgctxt "support_mesh description"
  4387. msgid "Use this mesh to specify support areas. This can be used to generate support structure."
  4388. msgstr ""
  4389. #: fdmprinter.def.json
  4390. msgctxt "anti_overhang_mesh label"
  4391. msgid "Anti Overhang Mesh"
  4392. msgstr ""
  4393. #: fdmprinter.def.json
  4394. msgctxt "anti_overhang_mesh description"
  4395. msgid "Use this mesh to specify where no part of the model should be detected as overhang. This can be used to remove unwanted support structure."
  4396. msgstr ""
  4397. #: fdmprinter.def.json
  4398. msgctxt "magic_mesh_surface_mode label"
  4399. msgid "Surface Mode"
  4400. msgstr ""
  4401. #: fdmprinter.def.json
  4402. msgctxt "magic_mesh_surface_mode description"
  4403. msgid "Treat the model as a surface only, a volume, or volumes with loose surfaces. The normal print mode only prints enclosed volumes. \"Surface\" prints a single wall tracing the mesh surface with no infill and no top/bottom skin. \"Both\" prints enclosed volumes like normal and any remaining polygons as surfaces."
  4404. msgstr ""
  4405. #: fdmprinter.def.json
  4406. msgctxt "magic_mesh_surface_mode option normal"
  4407. msgid "Normal"
  4408. msgstr ""
  4409. #: fdmprinter.def.json
  4410. msgctxt "magic_mesh_surface_mode option surface"
  4411. msgid "Surface"
  4412. msgstr ""
  4413. #: fdmprinter.def.json
  4414. msgctxt "magic_mesh_surface_mode option both"
  4415. msgid "Both"
  4416. msgstr ""
  4417. #: fdmprinter.def.json
  4418. msgctxt "magic_spiralize label"
  4419. msgid "Spiralize Outer Contour"
  4420. msgstr ""
  4421. #: fdmprinter.def.json
  4422. msgctxt "magic_spiralize description"
  4423. msgid "Spiralize smooths out the Z move of the outer edge. This will create a steady Z increase over the whole print. This feature turns a solid model into a single walled print with a solid bottom. This feature should only be enabled when each layer only contains a single part."
  4424. msgstr ""
  4425. #: fdmprinter.def.json
  4426. msgctxt "smooth_spiralized_contours label"
  4427. msgid "Smooth Spiralized Contours"
  4428. msgstr ""
  4429. #: fdmprinter.def.json
  4430. msgctxt "smooth_spiralized_contours description"
  4431. msgid "Smooth the spiralized contours to reduce the visibility of the Z seam (the Z seam should be barely visible on the print but will still be visible in the layer view). Note that smoothing will tend to blur fine surface details."
  4432. msgstr ""
  4433. #: fdmprinter.def.json
  4434. msgctxt "relative_extrusion label"
  4435. msgid "Relative Extrusion"
  4436. msgstr ""
  4437. #: fdmprinter.def.json
  4438. msgctxt "relative_extrusion description"
  4439. msgid "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the g-code. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any g-code script is output."
  4440. msgstr ""
  4441. #: fdmprinter.def.json
  4442. msgctxt "experimental label"
  4443. msgid "Experimental"
  4444. msgstr ""
  4445. #: fdmprinter.def.json
  4446. msgctxt "experimental description"
  4447. msgid "Features that haven't completely been fleshed out yet."
  4448. msgstr ""
  4449. #: fdmprinter.def.json
  4450. msgctxt "slicing_tolerance label"
  4451. msgid "Slicing Tolerance"
  4452. msgstr ""
  4453. #: fdmprinter.def.json
  4454. msgctxt "slicing_tolerance description"
  4455. msgid "Vertical tolerance in the sliced layers. The contours of a layer are normally generated by taking cross sections through the middle of each layer's thickness (Middle). Alternatively each layer can have the areas which fall inside of the volume throughout the entire thickness of the layer (Exclusive) or a layer has the areas which fall inside anywhere within the layer (Inclusive). Inclusive retains the most details, Exclusive makes for the best fit and Middle stays closest to the original surface."
  4456. msgstr ""
  4457. #: fdmprinter.def.json
  4458. msgctxt "slicing_tolerance option middle"
  4459. msgid "Middle"
  4460. msgstr ""
  4461. #: fdmprinter.def.json
  4462. msgctxt "slicing_tolerance option exclusive"
  4463. msgid "Exclusive"
  4464. msgstr ""
  4465. #: fdmprinter.def.json
  4466. msgctxt "slicing_tolerance option inclusive"
  4467. msgid "Inclusive"
  4468. msgstr ""
  4469. #: fdmprinter.def.json
  4470. msgctxt "infill_enable_travel_optimization label"
  4471. msgid "Infill Travel Optimization"
  4472. msgstr ""
  4473. #: fdmprinter.def.json
  4474. msgctxt "infill_enable_travel_optimization description"
  4475. msgid "When enabled, the order in which the infill lines are printed is optimized to reduce the distance travelled. The reduction in travel time achieved very much depends on the model being sliced, infill pattern, density, etc. Note that, for some models that have many small areas of infill, the time to slice the model may be greatly increased."
  4476. msgstr ""
  4477. #: fdmprinter.def.json
  4478. msgctxt "material_flow_temp_graph label"
  4479. msgid "Flow Temperature Graph"
  4480. msgstr ""
  4481. #: fdmprinter.def.json
  4482. msgctxt "material_flow_temp_graph description"
  4483. msgid "Data linking material flow (in mm3 per second) to temperature (degrees Celsius)."
  4484. msgstr ""
  4485. #: fdmprinter.def.json
  4486. msgctxt "minimum_polygon_circumference label"
  4487. msgid "Minimum Polygon Circumference"
  4488. msgstr ""
  4489. #: fdmprinter.def.json
  4490. msgctxt "minimum_polygon_circumference description"
  4491. msgid "Polygons in sliced layers that have a circumference smaller than this amount will be filtered out. Lower values lead to higher resolution mesh at the cost of slicing time. It is meant mostly for high resolution SLA printers and very tiny 3D models with a lot of details."
  4492. msgstr ""
  4493. #: fdmprinter.def.json
  4494. msgctxt "interlocking_enable label"
  4495. msgid "Generate Interlocking Structure"
  4496. msgstr ""
  4497. #: fdmprinter.def.json
  4498. msgctxt "interlocking_enable description"
  4499. msgid "Whether to generate a structure at the interface between two models of a different material in order to improve the adhesion. The structure consists of cells of horizontal beams with alternating direction which connect to each other over the Z direction in order to interlock with the beams of the other material."
  4500. msgstr ""
  4501. #: fdmprinter.def.json
  4502. msgctxt "interlocking_beam_width label"
  4503. msgid "Interlocking Beam Width"
  4504. msgstr ""
  4505. #: fdmprinter.def.json
  4506. msgctxt "interlocking_beam_width description"
  4507. msgid "The width of the beams of this material in the interlocking structure."
  4508. msgstr ""
  4509. #: fdmprinter.def.json
  4510. msgctxt "interlocking_orientation label"
  4511. msgid "Interlocking Structure Orientation"
  4512. msgstr ""
  4513. #: fdmprinter.def.json
  4514. msgctxt "interlocking_orientation description"
  4515. msgid "The direction of the beams of the interlocking structure in the XY plane as a rotation about the Z axis."
  4516. msgstr ""
  4517. #: fdmprinter.def.json
  4518. msgctxt "interlocking_beam_layer_count label"
  4519. msgid "Interlocking Beam Layer Count"
  4520. msgstr ""
  4521. #: fdmprinter.def.json
  4522. msgctxt "interlocking_beam_layer_count description"
  4523. msgid "The height of the beams of the interlocking structure as measured in number of layers. Less layers is stronger, but more prone to manufacturing defects."
  4524. msgstr ""
  4525. #: fdmprinter.def.json
  4526. msgctxt "interlocking_depth label"
  4527. msgid "Interlocking Depth"
  4528. msgstr ""
  4529. #: fdmprinter.def.json
  4530. msgctxt "interlocking_depth description"
  4531. msgid "The number of cells along the depth of the interface between two models where an interlocking structure is to be generated. Less cells is better, but too little cells can cause the not to be connected properly, which reduces the adhesion performance of the interlocking structure."
  4532. msgstr ""
  4533. #: fdmprinter.def.json
  4534. msgctxt "interlocking_boundary_avoidance label"
  4535. msgid "Interlocking Boundary Avoidance"
  4536. msgstr ""
  4537. #: fdmprinter.def.json
  4538. msgctxt "interlocking_boundary_avoidance description"
  4539. msgid "The distance close to the boundary of the print where not to generate an interlocking structure as measued in number of cells times 2. If set to a value lower than the Inerlocking Depth then the interlocking structure can become visible on the outside of the print near the interfaces where two models meet."
  4540. msgstr ""
  4541. #: fdmprinter.def.json
  4542. msgctxt "support_skip_some_zags label"
  4543. msgid "Break Up Support In Chunks"
  4544. msgstr ""
  4545. #: fdmprinter.def.json
  4546. msgctxt "support_skip_some_zags description"
  4547. msgid "Skip some support line connections to make the support structure easier to break away. This setting is applicable to the Zig Zag support infill pattern."
  4548. msgstr ""
  4549. #: fdmprinter.def.json
  4550. msgctxt "support_skip_zag_per_mm label"
  4551. msgid "Support Chunk Size"
  4552. msgstr ""
  4553. #: fdmprinter.def.json
  4554. msgctxt "support_skip_zag_per_mm description"
  4555. msgid "Leave out a connection between support lines once every N millimeter to make the support structure easier to break away."
  4556. msgstr ""
  4557. #: fdmprinter.def.json
  4558. msgctxt "support_zag_skip_count label"
  4559. msgid "Support Chunk Line Count"
  4560. msgstr ""
  4561. #: fdmprinter.def.json
  4562. msgctxt "support_zag_skip_count description"
  4563. msgid "Skip one in every N connection lines to make the support structure easier to break away."
  4564. msgstr ""
  4565. #: fdmprinter.def.json
  4566. msgctxt "draft_shield_enabled label"
  4567. msgid "Enable Draft Shield"
  4568. msgstr ""
  4569. #: fdmprinter.def.json
  4570. msgctxt "draft_shield_enabled description"
  4571. msgid "This will create a wall around the model, which traps (hot) air and shields against exterior airflow. Especially useful for materials which warp easily."
  4572. msgstr ""
  4573. #: fdmprinter.def.json
  4574. msgctxt "draft_shield_dist label"
  4575. msgid "Draft Shield X/Y Distance"
  4576. msgstr ""
  4577. #: fdmprinter.def.json
  4578. msgctxt "draft_shield_dist description"
  4579. msgid "Distance of the draft shield from the print, in the X/Y directions."
  4580. msgstr ""
  4581. #: fdmprinter.def.json
  4582. msgctxt "draft_shield_height_limitation label"
  4583. msgid "Draft Shield Limitation"
  4584. msgstr ""
  4585. #: fdmprinter.def.json
  4586. msgctxt "draft_shield_height_limitation description"
  4587. msgid "Set the height of the draft shield. Choose to print the draft shield at the full height of the model or at a limited height."
  4588. msgstr ""
  4589. #: fdmprinter.def.json
  4590. msgctxt "draft_shield_height_limitation option full"
  4591. msgid "Full"
  4592. msgstr ""
  4593. #: fdmprinter.def.json
  4594. msgctxt "draft_shield_height_limitation option limited"
  4595. msgid "Limited"
  4596. msgstr ""
  4597. #: fdmprinter.def.json
  4598. msgctxt "draft_shield_height label"
  4599. msgid "Draft Shield Height"
  4600. msgstr ""
  4601. #: fdmprinter.def.json
  4602. msgctxt "draft_shield_height description"
  4603. msgid "Height limitation of the draft shield. Above this height no draft shield will be printed."
  4604. msgstr ""
  4605. #: fdmprinter.def.json
  4606. msgctxt "conical_overhang_enabled label"
  4607. msgid "Make Overhang Printable"
  4608. msgstr ""
  4609. #: fdmprinter.def.json
  4610. msgctxt "conical_overhang_enabled description"
  4611. msgid "Change the geometry of the printed model such that minimal support is required. Steep overhangs will become shallow overhangs. Overhanging areas will drop down to become more vertical."
  4612. msgstr ""
  4613. #: fdmprinter.def.json
  4614. msgctxt "conical_overhang_angle label"
  4615. msgid "Maximum Model Angle"
  4616. msgstr ""
  4617. #: fdmprinter.def.json
  4618. msgctxt "conical_overhang_angle description"
  4619. msgid "The maximum angle of overhangs after the they have been made printable. At a value of 0° all overhangs are replaced by a piece of model connected to the build plate, 90° will not change the model in any way."
  4620. msgstr ""
  4621. #: fdmprinter.def.json
  4622. msgctxt "conical_overhang_hole_size label"
  4623. msgid "Maximum Overhang Hole Area"
  4624. msgstr ""
  4625. #: fdmprinter.def.json
  4626. msgctxt "conical_overhang_hole_size description"
  4627. msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base."
  4628. msgstr ""
  4629. #: fdmprinter.def.json
  4630. msgctxt "coasting_enable label"
  4631. msgid "Enable Coasting"
  4632. msgstr ""
  4633. #: fdmprinter.def.json
  4634. msgctxt "coasting_enable description"
  4635. msgid "Coasting replaces the last part of an extrusion path with a travel path. The oozed material is used to print the last piece of the extrusion path in order to reduce stringing."
  4636. msgstr ""
  4637. #: fdmprinter.def.json
  4638. msgctxt "coasting_volume label"
  4639. msgid "Coasting Volume"
  4640. msgstr ""
  4641. #: fdmprinter.def.json
  4642. msgctxt "coasting_volume description"
  4643. msgid "The volume otherwise oozed. This value should generally be close to the nozzle diameter cubed."
  4644. msgstr ""
  4645. #: fdmprinter.def.json
  4646. msgctxt "coasting_min_volume label"
  4647. msgid "Minimum Volume Before Coasting"
  4648. msgstr ""
  4649. #: fdmprinter.def.json
  4650. msgctxt "coasting_min_volume description"
  4651. msgid "The smallest volume an extrusion path should have before allowing coasting. For smaller extrusion paths, less pressure has been built up in the bowden tube and so the coasted volume is scaled linearly. This value should always be larger than the Coasting Volume."
  4652. msgstr ""
  4653. #: fdmprinter.def.json
  4654. msgctxt "coasting_speed label"
  4655. msgid "Coasting Speed"
  4656. msgstr ""
  4657. #: fdmprinter.def.json
  4658. msgctxt "coasting_speed description"
  4659. msgid "The speed by which to move during coasting, relative to the speed of the extrusion path. A value slightly under 100% is advised, since during the coasting move the pressure in the bowden tube drops."
  4660. msgstr ""
  4661. #: fdmprinter.def.json
  4662. msgctxt "cross_infill_pocket_size label"
  4663. msgid "Cross 3D Pocket Size"
  4664. msgstr ""
  4665. #: fdmprinter.def.json
  4666. msgctxt "cross_infill_pocket_size description"
  4667. msgid "The size of pockets at four-way crossings in the cross 3D pattern at heights where the pattern is touching itself."
  4668. msgstr ""
  4669. #: fdmprinter.def.json
  4670. msgctxt "cross_infill_density_image label"
  4671. msgid "Cross Infill Density Image"
  4672. msgstr ""
  4673. #: fdmprinter.def.json
  4674. msgctxt "cross_infill_density_image description"
  4675. msgid "The file location of an image of which the brightness values determine the minimal density at the corresponding location in the infill of the print."
  4676. msgstr ""
  4677. #: fdmprinter.def.json
  4678. msgctxt "cross_support_density_image label"
  4679. msgid "Cross Fill Density Image for Support"
  4680. msgstr ""
  4681. #: fdmprinter.def.json
  4682. msgctxt "cross_support_density_image description"
  4683. msgid "The file location of an image of which the brightness values determine the minimal density at the corresponding location in the support."
  4684. msgstr ""
  4685. #: fdmprinter.def.json
  4686. msgctxt "support_conical_enabled label"
  4687. msgid "Enable Conical Support"
  4688. msgstr ""
  4689. #: fdmprinter.def.json
  4690. msgctxt "support_conical_enabled description"
  4691. msgid "Make support areas smaller at the bottom than at the overhang."
  4692. msgstr ""
  4693. #: fdmprinter.def.json
  4694. msgctxt "support_conical_angle label"
  4695. msgid "Conical Support Angle"
  4696. msgstr ""
  4697. #: fdmprinter.def.json
  4698. msgctxt "support_conical_angle description"
  4699. msgid "The angle of the tilt of conical support. With 0 degrees being vertical, and 90 degrees being horizontal. Smaller angles cause the support to be more sturdy, but consist of more material. Negative angles cause the base of the support to be wider than the top."
  4700. msgstr ""
  4701. #: fdmprinter.def.json
  4702. msgctxt "support_conical_min_width label"
  4703. msgid "Conical Support Minimum Width"
  4704. msgstr ""
  4705. #: fdmprinter.def.json
  4706. msgctxt "support_conical_min_width description"
  4707. msgid "Minimum width to which the base of the conical support area is reduced. Small widths can lead to unstable support structures."
  4708. msgstr ""
  4709. #: fdmprinter.def.json
  4710. msgctxt "magic_fuzzy_skin_enabled label"
  4711. msgid "Fuzzy Skin"
  4712. msgstr ""
  4713. #: fdmprinter.def.json
  4714. msgctxt "magic_fuzzy_skin_enabled description"
  4715. msgid "Randomly jitter while printing the outer wall, so that the surface has a rough and fuzzy look."
  4716. msgstr ""
  4717. #: fdmprinter.def.json
  4718. msgctxt "magic_fuzzy_skin_outside_only label"
  4719. msgid "Fuzzy Skin Outside Only"
  4720. msgstr ""
  4721. #: fdmprinter.def.json
  4722. msgctxt "magic_fuzzy_skin_outside_only description"
  4723. msgid "Jitter only the parts' outlines and not the parts' holes."
  4724. msgstr ""
  4725. #: fdmprinter.def.json
  4726. msgctxt "magic_fuzzy_skin_thickness label"
  4727. msgid "Fuzzy Skin Thickness"
  4728. msgstr ""
  4729. #: fdmprinter.def.json
  4730. msgctxt "magic_fuzzy_skin_thickness description"
  4731. msgid "The width within which to jitter. It's advised to keep this below the outer wall width, since the inner walls are unaltered."
  4732. msgstr ""
  4733. #: fdmprinter.def.json
  4734. msgctxt "magic_fuzzy_skin_point_density label"
  4735. msgid "Fuzzy Skin Density"
  4736. msgstr ""
  4737. #: fdmprinter.def.json
  4738. msgctxt "magic_fuzzy_skin_point_density description"
  4739. msgid "The average density of points introduced on each polygon in a layer. Note that the original points of the polygon are discarded, so a low density results in a reduction of the resolution."
  4740. msgstr ""
  4741. #: fdmprinter.def.json
  4742. msgctxt "magic_fuzzy_skin_point_dist label"
  4743. msgid "Fuzzy Skin Point Distance"
  4744. msgstr ""
  4745. #: fdmprinter.def.json
  4746. msgctxt "magic_fuzzy_skin_point_dist description"
  4747. msgid "The average distance between the random points introduced on each line segment. Note that the original points of the polygon are discarded, so a high smoothness results in a reduction of the resolution. This value must be higher than half the Fuzzy Skin Thickness."
  4748. msgstr ""
  4749. #: fdmprinter.def.json
  4750. msgctxt "flow_rate_max_extrusion_offset label"
  4751. msgid "Flow Rate Compensation Max Extrusion Offset"
  4752. msgstr ""
  4753. #: fdmprinter.def.json
  4754. msgctxt "flow_rate_max_extrusion_offset description"
  4755. msgid "The maximum distance in mm to move the filament to compensate for changes in flow rate."
  4756. msgstr ""
  4757. #: fdmprinter.def.json
  4758. msgctxt "flow_rate_extrusion_offset_factor label"
  4759. msgid "Flow Rate Compensation Factor"
  4760. msgstr ""
  4761. #: fdmprinter.def.json
  4762. msgctxt "flow_rate_extrusion_offset_factor description"
  4763. msgid "How far to move the filament in order to compensate for changes in flow rate, as a percentage of how far the filament would move in one second of extrusion."
  4764. msgstr ""
  4765. #: fdmprinter.def.json
  4766. msgctxt "wireframe_enabled label"
  4767. msgid "Wire Printing"
  4768. msgstr ""
  4769. #: fdmprinter.def.json
  4770. msgctxt "wireframe_enabled description"
  4771. msgid "Print only the outside surface with a sparse webbed structure, printing 'in thin air'. This is realized by horizontally printing the contours of the model at given Z intervals which are connected via upward and diagonally downward lines."
  4772. msgstr ""
  4773. #: fdmprinter.def.json
  4774. msgctxt "wireframe_height label"
  4775. msgid "WP Connection Height"
  4776. msgstr ""
  4777. #: fdmprinter.def.json
  4778. msgctxt "wireframe_height description"
  4779. msgid "The height of the upward and diagonally downward lines between two horizontal parts. This determines the overall density of the net structure. Only applies to Wire Printing."
  4780. msgstr ""
  4781. #: fdmprinter.def.json
  4782. msgctxt "wireframe_roof_inset label"
  4783. msgid "WP Roof Inset Distance"
  4784. msgstr ""
  4785. #: fdmprinter.def.json
  4786. msgctxt "wireframe_roof_inset description"
  4787. msgid "The distance covered when making a connection from a roof outline inward. Only applies to Wire Printing."
  4788. msgstr ""
  4789. #: fdmprinter.def.json
  4790. msgctxt "wireframe_printspeed label"
  4791. msgid "WP Speed"
  4792. msgstr ""
  4793. #: fdmprinter.def.json
  4794. msgctxt "wireframe_printspeed description"
  4795. msgid "Speed at which the nozzle moves when extruding material. Only applies to Wire Printing."
  4796. msgstr ""
  4797. #: fdmprinter.def.json
  4798. msgctxt "wireframe_printspeed_bottom label"
  4799. msgid "WP Bottom Printing Speed"
  4800. msgstr ""
  4801. #: fdmprinter.def.json
  4802. msgctxt "wireframe_printspeed_bottom description"
  4803. msgid "Speed of printing the first layer, which is the only layer touching the build platform. Only applies to Wire Printing."
  4804. msgstr ""
  4805. #: fdmprinter.def.json
  4806. msgctxt "wireframe_printspeed_up label"
  4807. msgid "WP Upward Printing Speed"
  4808. msgstr ""
  4809. #: fdmprinter.def.json
  4810. msgctxt "wireframe_printspeed_up description"
  4811. msgid "Speed of printing a line upward 'in thin air'. Only applies to Wire Printing."
  4812. msgstr ""
  4813. #: fdmprinter.def.json
  4814. msgctxt "wireframe_printspeed_down label"
  4815. msgid "WP Downward Printing Speed"
  4816. msgstr ""
  4817. #: fdmprinter.def.json
  4818. msgctxt "wireframe_printspeed_down description"
  4819. msgid "Speed of printing a line diagonally downward. Only applies to Wire Printing."
  4820. msgstr ""
  4821. #: fdmprinter.def.json
  4822. msgctxt "wireframe_printspeed_flat label"
  4823. msgid "WP Horizontal Printing Speed"
  4824. msgstr ""
  4825. #: fdmprinter.def.json
  4826. msgctxt "wireframe_printspeed_flat description"
  4827. msgid "Speed of printing the horizontal contours of the model. Only applies to Wire Printing."
  4828. msgstr ""
  4829. #: fdmprinter.def.json
  4830. msgctxt "wireframe_flow label"
  4831. msgid "WP Flow"
  4832. msgstr ""
  4833. #: fdmprinter.def.json
  4834. msgctxt "wireframe_flow description"
  4835. msgid "Flow compensation: the amount of material extruded is multiplied by this value. Only applies to Wire Printing."
  4836. msgstr ""
  4837. #: fdmprinter.def.json
  4838. msgctxt "wireframe_flow_connection label"
  4839. msgid "WP Connection Flow"
  4840. msgstr ""
  4841. #: fdmprinter.def.json
  4842. msgctxt "wireframe_flow_connection description"
  4843. msgid "Flow compensation when going up or down. Only applies to Wire Printing."
  4844. msgstr ""
  4845. #: fdmprinter.def.json
  4846. msgctxt "wireframe_flow_flat label"
  4847. msgid "WP Flat Flow"
  4848. msgstr ""
  4849. #: fdmprinter.def.json
  4850. msgctxt "wireframe_flow_flat description"
  4851. msgid "Flow compensation when printing flat lines. Only applies to Wire Printing."
  4852. msgstr ""
  4853. #: fdmprinter.def.json
  4854. msgctxt "wireframe_top_delay label"
  4855. msgid "WP Top Delay"
  4856. msgstr ""
  4857. #: fdmprinter.def.json
  4858. msgctxt "wireframe_top_delay description"
  4859. msgid "Delay time after an upward move, so that the upward line can harden. Only applies to Wire Printing."
  4860. msgstr ""
  4861. #: fdmprinter.def.json
  4862. msgctxt "wireframe_bottom_delay label"
  4863. msgid "WP Bottom Delay"
  4864. msgstr ""
  4865. #: fdmprinter.def.json
  4866. msgctxt "wireframe_bottom_delay description"
  4867. msgid "Delay time after a downward move. Only applies to Wire Printing."
  4868. msgstr ""
  4869. #: fdmprinter.def.json
  4870. msgctxt "wireframe_flat_delay label"
  4871. msgid "WP Flat Delay"
  4872. msgstr ""
  4873. #: fdmprinter.def.json
  4874. msgctxt "wireframe_flat_delay description"
  4875. msgid "Delay time between two horizontal segments. Introducing such a delay can cause better adhesion to previous layers at the connection points, while too long delays cause sagging. Only applies to Wire Printing."
  4876. msgstr ""
  4877. #: fdmprinter.def.json
  4878. msgctxt "wireframe_up_half_speed label"
  4879. msgid "WP Ease Upward"
  4880. msgstr ""
  4881. #: fdmprinter.def.json
  4882. msgctxt "wireframe_up_half_speed description"
  4883. msgid "Distance of an upward move which is extruded with half speed.\nThis can cause better adhesion to previous layers, while not heating the material in those layers too much. Only applies to Wire Printing."
  4884. msgstr ""
  4885. #: fdmprinter.def.json
  4886. msgctxt "wireframe_top_jump label"
  4887. msgid "WP Knot Size"
  4888. msgstr ""
  4889. #: fdmprinter.def.json
  4890. msgctxt "wireframe_top_jump description"
  4891. msgid "Creates a small knot at the top of an upward line, so that the consecutive horizontal layer has a better chance to connect to it. Only applies to Wire Printing."
  4892. msgstr ""
  4893. #: fdmprinter.def.json
  4894. msgctxt "wireframe_fall_down label"
  4895. msgid "WP Fall Down"
  4896. msgstr ""
  4897. #: fdmprinter.def.json
  4898. msgctxt "wireframe_fall_down description"
  4899. msgid "Distance with which the material falls down after an upward extrusion. This distance is compensated for. Only applies to Wire Printing."
  4900. msgstr ""
  4901. #: fdmprinter.def.json
  4902. msgctxt "wireframe_drag_along label"
  4903. msgid "WP Drag Along"
  4904. msgstr ""
  4905. #: fdmprinter.def.json
  4906. msgctxt "wireframe_drag_along description"
  4907. msgid "Distance with which the material of an upward extrusion is dragged along with the diagonally downward extrusion. This distance is compensated for. Only applies to Wire Printing."
  4908. msgstr ""
  4909. #: fdmprinter.def.json
  4910. msgctxt "wireframe_strategy label"
  4911. msgid "WP Strategy"
  4912. msgstr ""
  4913. #: fdmprinter.def.json
  4914. msgctxt "wireframe_strategy description"
  4915. msgid "Strategy for making sure two consecutive layers connect at each connection point. Retraction lets the upward lines harden in the right position, but may cause filament grinding. A knot can be made at the end of an upward line to heighten the chance of connecting to it and to let the line cool; however, it may require slow printing speeds. Another strategy is to compensate for the sagging of the top of an upward line; however, the lines won't always fall down as predicted."
  4916. msgstr ""
  4917. #: fdmprinter.def.json
  4918. msgctxt "wireframe_strategy option compensate"
  4919. msgid "Compensate"
  4920. msgstr ""
  4921. #: fdmprinter.def.json
  4922. msgctxt "wireframe_strategy option knot"
  4923. msgid "Knot"
  4924. msgstr ""
  4925. #: fdmprinter.def.json
  4926. msgctxt "wireframe_strategy option retract"
  4927. msgid "Retract"
  4928. msgstr ""
  4929. #: fdmprinter.def.json
  4930. msgctxt "wireframe_straight_before_down label"
  4931. msgid "WP Straighten Downward Lines"
  4932. msgstr ""
  4933. #: fdmprinter.def.json
  4934. msgctxt "wireframe_straight_before_down description"
  4935. msgid "Percentage of a diagonally downward line which is covered by a horizontal line piece. This can prevent sagging of the top most point of upward lines. Only applies to Wire Printing."
  4936. msgstr ""
  4937. #: fdmprinter.def.json
  4938. msgctxt "wireframe_roof_fall_down label"
  4939. msgid "WP Roof Fall Down"
  4940. msgstr ""
  4941. #: fdmprinter.def.json
  4942. msgctxt "wireframe_roof_fall_down description"
  4943. msgid "The distance which horizontal roof lines printed 'in thin air' fall down when being printed. This distance is compensated for. Only applies to Wire Printing."
  4944. msgstr ""
  4945. #: fdmprinter.def.json
  4946. msgctxt "wireframe_roof_drag_along label"
  4947. msgid "WP Roof Drag Along"
  4948. msgstr ""
  4949. #: fdmprinter.def.json
  4950. msgctxt "wireframe_roof_drag_along description"
  4951. msgid "The distance of the end piece of an inward line which gets dragged along when going back to the outer outline of the roof. This distance is compensated for. Only applies to Wire Printing."
  4952. msgstr ""
  4953. #: fdmprinter.def.json
  4954. msgctxt "wireframe_roof_outer_delay label"
  4955. msgid "WP Roof Outer Delay"
  4956. msgstr ""
  4957. #: fdmprinter.def.json
  4958. msgctxt "wireframe_roof_outer_delay description"
  4959. msgid "Time spent at the outer perimeters of hole which is to become a roof. Longer times can ensure a better connection. Only applies to Wire Printing."
  4960. msgstr ""
  4961. #: fdmprinter.def.json
  4962. msgctxt "wireframe_nozzle_clearance label"
  4963. msgid "WP Nozzle Clearance"
  4964. msgstr ""
  4965. #: fdmprinter.def.json
  4966. msgctxt "wireframe_nozzle_clearance description"
  4967. msgid "Distance between the nozzle and horizontally downward lines. Larger clearance results in diagonally downward lines with a less steep angle, which in turn results in less upward connections with the next layer. Only applies to Wire Printing."
  4968. msgstr ""
  4969. #: fdmprinter.def.json
  4970. msgctxt "adaptive_layer_height_enabled label"
  4971. msgid "Use Adaptive Layers"
  4972. msgstr ""
  4973. #: fdmprinter.def.json
  4974. msgctxt "adaptive_layer_height_enabled description"
  4975. msgid "Adaptive layers computes the layer heights depending on the shape of the model."
  4976. msgstr ""
  4977. #: fdmprinter.def.json
  4978. msgctxt "adaptive_layer_height_variation label"
  4979. msgid "Adaptive Layers Maximum Variation"
  4980. msgstr ""
  4981. #: fdmprinter.def.json
  4982. msgctxt "adaptive_layer_height_variation description"
  4983. msgid "The maximum allowed height different from the base layer height."
  4984. msgstr ""
  4985. #: fdmprinter.def.json
  4986. msgctxt "adaptive_layer_height_variation_step label"
  4987. msgid "Adaptive Layers Variation Step Size"
  4988. msgstr ""
  4989. #: fdmprinter.def.json
  4990. msgctxt "adaptive_layer_height_variation_step description"
  4991. msgid "The difference in height of the next layer height compared to the previous one."
  4992. msgstr ""
  4993. #: fdmprinter.def.json
  4994. msgctxt "adaptive_layer_height_threshold label"
  4995. msgid "Adaptive Layers Topography Size"
  4996. msgstr ""
  4997. #: fdmprinter.def.json
  4998. msgctxt "adaptive_layer_height_threshold description"
  4999. msgid "Target horizontal distance between two adjacent layers. Reducing this setting causes thinner layers to be used to bring the edges of the layers closer together."
  5000. msgstr ""
  5001. #: fdmprinter.def.json
  5002. msgctxt "wall_overhang_angle label"
  5003. msgid "Overhanging Wall Angle"
  5004. msgstr ""
  5005. #: fdmprinter.def.json
  5006. msgctxt "wall_overhang_angle description"
  5007. msgid "Walls that overhang more than this angle will be printed using overhanging wall settings. When the value is 90, no walls will be treated as overhanging. Overhang that gets supported by support will not be treated as overhang either."
  5008. msgstr ""
  5009. #: fdmprinter.def.json
  5010. msgctxt "wall_overhang_speed_factor label"
  5011. msgid "Overhanging Wall Speed"
  5012. msgstr ""
  5013. #: fdmprinter.def.json
  5014. msgctxt "wall_overhang_speed_factor description"
  5015. msgid "Overhanging walls will be printed at this percentage of their normal print speed."
  5016. msgstr ""
  5017. #: fdmprinter.def.json
  5018. msgctxt "bridge_settings_enabled label"
  5019. msgid "Enable Bridge Settings"
  5020. msgstr ""
  5021. #: fdmprinter.def.json
  5022. msgctxt "bridge_settings_enabled description"
  5023. msgid "Detect bridges and modify print speed, flow and fan settings while bridges are printed."
  5024. msgstr ""
  5025. #: fdmprinter.def.json
  5026. msgctxt "bridge_wall_min_length label"
  5027. msgid "Minimum Bridge Wall Length"
  5028. msgstr ""
  5029. #: fdmprinter.def.json
  5030. msgctxt "bridge_wall_min_length description"
  5031. msgid "Unsupported walls shorter than this will be printed using the normal wall settings. Longer unsupported walls will be printed using the bridge wall settings."
  5032. msgstr ""
  5033. #: fdmprinter.def.json
  5034. msgctxt "bridge_skin_support_threshold label"
  5035. msgid "Bridge Skin Support Threshold"
  5036. msgstr ""
  5037. #: fdmprinter.def.json
  5038. msgctxt "bridge_skin_support_threshold description"
  5039. msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings."
  5040. msgstr ""
  5041. #: fdmprinter.def.json
  5042. msgctxt "bridge_sparse_infill_max_density label"
  5043. msgid "Bridge Sparse Infill Max Density"
  5044. msgstr ""
  5045. #: fdmprinter.def.json
  5046. msgctxt "bridge_sparse_infill_max_density description"
  5047. msgid "Maximum density of infill considered to be sparse. Skin over sparse infill is considered to be unsupported and so may be treated as a bridge skin."
  5048. msgstr ""
  5049. #: fdmprinter.def.json
  5050. msgctxt "bridge_wall_coast label"
  5051. msgid "Bridge Wall Coasting"
  5052. msgstr ""
  5053. #: fdmprinter.def.json
  5054. msgctxt "bridge_wall_coast description"
  5055. msgid "This controls the distance the extruder should coast immediately before a bridge wall begins. Coasting before the bridge starts can reduce the pressure in the nozzle and may produce a flatter bridge."
  5056. msgstr ""
  5057. #: fdmprinter.def.json
  5058. msgctxt "bridge_wall_speed label"
  5059. msgid "Bridge Wall Speed"
  5060. msgstr ""
  5061. #: fdmprinter.def.json
  5062. msgctxt "bridge_wall_speed description"
  5063. msgid "The speed at which the bridge walls are printed."
  5064. msgstr ""
  5065. #: fdmprinter.def.json
  5066. msgctxt "bridge_wall_material_flow label"
  5067. msgid "Bridge Wall Flow"
  5068. msgstr ""
  5069. #: fdmprinter.def.json
  5070. msgctxt "bridge_wall_material_flow description"
  5071. msgid "When printing bridge walls, the amount of material extruded is multiplied by this value."
  5072. msgstr ""
  5073. #: fdmprinter.def.json
  5074. msgctxt "bridge_skin_speed label"
  5075. msgid "Bridge Skin Speed"
  5076. msgstr ""
  5077. #: fdmprinter.def.json
  5078. msgctxt "bridge_skin_speed description"
  5079. msgid "The speed at which bridge skin regions are printed."
  5080. msgstr ""
  5081. #: fdmprinter.def.json
  5082. msgctxt "bridge_skin_material_flow label"
  5083. msgid "Bridge Skin Flow"
  5084. msgstr ""
  5085. #: fdmprinter.def.json
  5086. msgctxt "bridge_skin_material_flow description"
  5087. msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
  5088. msgstr ""
  5089. #: fdmprinter.def.json
  5090. msgctxt "bridge_skin_density label"
  5091. msgid "Bridge Skin Density"
  5092. msgstr ""
  5093. #: fdmprinter.def.json
  5094. msgctxt "bridge_skin_density description"
  5095. msgid "The density of the bridge skin layer. Values less than 100 will increase the gaps between the skin lines."
  5096. msgstr ""
  5097. #: fdmprinter.def.json
  5098. msgctxt "bridge_fan_speed label"
  5099. msgid "Bridge Fan Speed"
  5100. msgstr ""
  5101. #: fdmprinter.def.json
  5102. msgctxt "bridge_fan_speed description"
  5103. msgid "Percentage fan speed to use when printing bridge walls and skin."
  5104. msgstr ""
  5105. #: fdmprinter.def.json
  5106. msgctxt "bridge_enable_more_layers label"
  5107. msgid "Bridge Has Multiple Layers"
  5108. msgstr ""
  5109. #: fdmprinter.def.json
  5110. msgctxt "bridge_enable_more_layers description"
  5111. msgid "If enabled, the second and third layers above the air are printed using the following settings. Otherwise, those layers are printed using the normal settings."
  5112. msgstr ""
  5113. #: fdmprinter.def.json
  5114. msgctxt "bridge_skin_speed_2 label"
  5115. msgid "Bridge Second Skin Speed"
  5116. msgstr ""
  5117. #: fdmprinter.def.json
  5118. msgctxt "bridge_skin_speed_2 description"
  5119. msgid "Print speed to use when printing the second bridge skin layer."
  5120. msgstr ""
  5121. #: fdmprinter.def.json
  5122. msgctxt "bridge_skin_material_flow_2 label"
  5123. msgid "Bridge Second Skin Flow"
  5124. msgstr ""
  5125. #: fdmprinter.def.json
  5126. msgctxt "bridge_skin_material_flow_2 description"
  5127. msgid "When printing the second bridge skin layer, the amount of material extruded is multiplied by this value."
  5128. msgstr ""
  5129. #: fdmprinter.def.json
  5130. msgctxt "bridge_skin_density_2 label"
  5131. msgid "Bridge Second Skin Density"
  5132. msgstr ""
  5133. #: fdmprinter.def.json
  5134. msgctxt "bridge_skin_density_2 description"
  5135. msgid "The density of the second bridge skin layer. Values less than 100 will increase the gaps between the skin lines."
  5136. msgstr ""
  5137. #: fdmprinter.def.json
  5138. msgctxt "bridge_fan_speed_2 label"
  5139. msgid "Bridge Second Skin Fan Speed"
  5140. msgstr ""
  5141. #: fdmprinter.def.json
  5142. msgctxt "bridge_fan_speed_2 description"
  5143. msgid "Percentage fan speed to use when printing the second bridge skin layer."
  5144. msgstr ""
  5145. #: fdmprinter.def.json
  5146. msgctxt "bridge_skin_speed_3 label"
  5147. msgid "Bridge Third Skin Speed"
  5148. msgstr ""
  5149. #: fdmprinter.def.json
  5150. msgctxt "bridge_skin_speed_3 description"
  5151. msgid "Print speed to use when printing the third bridge skin layer."
  5152. msgstr ""
  5153. #: fdmprinter.def.json
  5154. msgctxt "bridge_skin_material_flow_3 label"
  5155. msgid "Bridge Third Skin Flow"
  5156. msgstr ""
  5157. #: fdmprinter.def.json
  5158. msgctxt "bridge_skin_material_flow_3 description"
  5159. msgid "When printing the third bridge skin layer, the amount of material extruded is multiplied by this value."
  5160. msgstr ""
  5161. #: fdmprinter.def.json
  5162. msgctxt "bridge_skin_density_3 label"
  5163. msgid "Bridge Third Skin Density"
  5164. msgstr ""
  5165. #: fdmprinter.def.json
  5166. msgctxt "bridge_skin_density_3 description"
  5167. msgid "The density of the third bridge skin layer. Values less than 100 will increase the gaps between the skin lines."
  5168. msgstr ""
  5169. #: fdmprinter.def.json
  5170. msgctxt "bridge_fan_speed_3 label"
  5171. msgid "Bridge Third Skin Fan Speed"
  5172. msgstr ""
  5173. #: fdmprinter.def.json
  5174. msgctxt "bridge_fan_speed_3 description"
  5175. msgid "Percentage fan speed to use when printing the third bridge skin layer."
  5176. msgstr ""
  5177. #: fdmprinter.def.json
  5178. msgctxt "clean_between_layers label"
  5179. msgid "Wipe Nozzle Between Layers"
  5180. msgstr ""
  5181. #: fdmprinter.def.json
  5182. msgctxt "clean_between_layers description"
  5183. msgid "Whether to include nozzle wipe G-Code between layers (maximum 1 per layer). Enabling this setting could influence behavior of retract at layer change. Please use Wipe Retraction settings to control retraction at layers where the wipe script will be working."
  5184. msgstr ""
  5185. #: fdmprinter.def.json
  5186. msgctxt "max_extrusion_before_wipe label"
  5187. msgid "Material Volume Between Wipes"
  5188. msgstr ""
  5189. #: fdmprinter.def.json
  5190. msgctxt "max_extrusion_before_wipe description"
  5191. msgid "Maximum material that can be extruded before another nozzle wipe is initiated. If this value is less than the volume of material required in a layer, the setting has no effect in this layer, i.e. it is limited to one wipe per layer."
  5192. msgstr ""
  5193. #: fdmprinter.def.json
  5194. msgctxt "wipe_retraction_enable label"
  5195. msgid "Wipe Retraction Enable"
  5196. msgstr ""
  5197. #: fdmprinter.def.json
  5198. msgctxt "wipe_retraction_enable description"
  5199. msgid "Retract the filament when the nozzle is moving over a non-printed area."
  5200. msgstr ""
  5201. #: fdmprinter.def.json
  5202. msgctxt "wipe_retraction_amount label"
  5203. msgid "Wipe Retraction Distance"
  5204. msgstr ""
  5205. #: fdmprinter.def.json
  5206. msgctxt "wipe_retraction_amount description"
  5207. msgid "Amount to retract the filament so it does not ooze during the wipe sequence."
  5208. msgstr ""
  5209. #: fdmprinter.def.json
  5210. msgctxt "wipe_retraction_extra_prime_amount label"
  5211. msgid "Wipe Retraction Extra Prime Amount"
  5212. msgstr ""
  5213. #: fdmprinter.def.json
  5214. msgctxt "wipe_retraction_extra_prime_amount description"
  5215. msgid "Some material can ooze away during a wipe travel moves, which can be compensated for here."
  5216. msgstr ""
  5217. #: fdmprinter.def.json
  5218. msgctxt "wipe_retraction_speed label"
  5219. msgid "Wipe Retraction Speed"
  5220. msgstr ""
  5221. #: fdmprinter.def.json
  5222. msgctxt "wipe_retraction_speed description"
  5223. msgid "The speed at which the filament is retracted and primed during a wipe retraction move."
  5224. msgstr ""
  5225. #: fdmprinter.def.json
  5226. msgctxt "wipe_retraction_retract_speed label"
  5227. msgid "Wipe Retraction Retract Speed"
  5228. msgstr ""
  5229. #: fdmprinter.def.json
  5230. msgctxt "wipe_retraction_retract_speed description"
  5231. msgid "The speed at which the filament is retracted during a wipe retraction move."
  5232. msgstr ""
  5233. #: fdmprinter.def.json
  5234. msgctxt "wipe_retraction_prime_speed label"
  5235. msgid "Wipe Retraction Prime Speed"
  5236. msgstr ""
  5237. #: fdmprinter.def.json
  5238. msgctxt "wipe_retraction_prime_speed description"
  5239. msgid "The speed at which the filament is primed during a wipe retraction move."
  5240. msgstr ""
  5241. #: fdmprinter.def.json
  5242. msgctxt "wipe_pause label"
  5243. msgid "Wipe Pause"
  5244. msgstr ""
  5245. #: fdmprinter.def.json
  5246. msgctxt "wipe_pause description"
  5247. msgid "Pause after the unretract."
  5248. msgstr ""
  5249. #: fdmprinter.def.json
  5250. msgctxt "wipe_hop_enable label"
  5251. msgid "Wipe Z Hop"
  5252. msgstr ""
  5253. #: fdmprinter.def.json
  5254. msgctxt "wipe_hop_enable description"
  5255. msgid "When wiping, the build plate is lowered to create clearance between the nozzle and the print. It prevents the nozzle from hitting the print during travel moves, reducing the chance to knock the print from the build plate."
  5256. msgstr ""
  5257. #: fdmprinter.def.json
  5258. msgctxt "wipe_hop_amount label"
  5259. msgid "Wipe Z Hop Height"
  5260. msgstr ""
  5261. #: fdmprinter.def.json
  5262. msgctxt "wipe_hop_amount description"
  5263. msgid "The height difference when performing a Z Hop."
  5264. msgstr ""
  5265. #: fdmprinter.def.json
  5266. msgctxt "wipe_hop_speed label"
  5267. msgid "Wipe Hop Speed"
  5268. msgstr ""
  5269. #: fdmprinter.def.json
  5270. msgctxt "wipe_hop_speed description"
  5271. msgid "Speed to move the z-axis during the hop."
  5272. msgstr ""
  5273. #: fdmprinter.def.json
  5274. msgctxt "wipe_brush_pos_x label"
  5275. msgid "Wipe Brush X Position"
  5276. msgstr ""
  5277. #: fdmprinter.def.json
  5278. msgctxt "wipe_brush_pos_x description"
  5279. msgid "X location where wipe script will start."
  5280. msgstr ""
  5281. #: fdmprinter.def.json
  5282. msgctxt "wipe_repeat_count label"
  5283. msgid "Wipe Repeat Count"
  5284. msgstr ""
  5285. #: fdmprinter.def.json
  5286. msgctxt "wipe_repeat_count description"
  5287. msgid "Number of times to move the nozzle across the brush."
  5288. msgstr ""
  5289. #: fdmprinter.def.json
  5290. msgctxt "wipe_move_distance label"
  5291. msgid "Wipe Move Distance"
  5292. msgstr ""
  5293. #: fdmprinter.def.json
  5294. msgctxt "wipe_move_distance description"
  5295. msgid "The distance to move the head back and forth across the brush."
  5296. msgstr ""
  5297. #: fdmprinter.def.json
  5298. msgctxt "small_hole_max_size label"
  5299. msgid "Small Hole Max Size"
  5300. msgstr ""
  5301. #: fdmprinter.def.json
  5302. msgctxt "small_hole_max_size description"
  5303. msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
  5304. msgstr ""
  5305. #: fdmprinter.def.json
  5306. msgctxt "small_feature_max_length label"
  5307. msgid "Small Feature Max Length"
  5308. msgstr ""
  5309. #: fdmprinter.def.json
  5310. msgctxt "small_feature_max_length description"
  5311. msgid "Feature outlines that are shorter than this length will be printed using Small Feature Speed."
  5312. msgstr ""
  5313. #: fdmprinter.def.json
  5314. msgctxt "small_feature_speed_factor label"
  5315. msgid "Small Feature Speed"
  5316. msgstr ""
  5317. #: fdmprinter.def.json
  5318. msgctxt "small_feature_speed_factor description"
  5319. msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
  5320. msgstr ""
  5321. #: fdmprinter.def.json
  5322. msgctxt "small_feature_speed_factor_0 label"
  5323. msgid "Small Feature Initial Layer Speed"
  5324. msgstr ""
  5325. #: fdmprinter.def.json
  5326. msgctxt "small_feature_speed_factor_0 description"
  5327. msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
  5328. msgstr ""
  5329. #: fdmprinter.def.json
  5330. msgctxt "material_alternate_walls label"
  5331. msgid "Alternate Wall Directions"
  5332. msgstr ""
  5333. #: fdmprinter.def.json
  5334. msgctxt "material_alternate_walls description"
  5335. msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
  5336. msgstr ""
  5337. #: fdmprinter.def.json
  5338. msgctxt "raft_remove_inside_corners label"
  5339. msgid "Remove Raft Inside Corners"
  5340. msgstr ""
  5341. #: fdmprinter.def.json
  5342. msgctxt "raft_remove_inside_corners description"
  5343. msgid "Remove inside corners from the raft, causing the raft to become convex."
  5344. msgstr ""
  5345. #: fdmprinter.def.json
  5346. msgctxt "raft_base_wall_count label"
  5347. msgid "Raft Base Wall Count"
  5348. msgstr ""
  5349. #: fdmprinter.def.json
  5350. msgctxt "raft_base_wall_count description"
  5351. msgid "The number of contours to print around the linear pattern in the base layer of the raft."
  5352. msgstr ""
  5353. #: fdmprinter.def.json
  5354. msgctxt "command_line_settings label"
  5355. msgid "Command Line Settings"
  5356. msgstr ""
  5357. #: fdmprinter.def.json
  5358. msgctxt "command_line_settings description"
  5359. msgid "Settings which are only used if CuraEngine isn't called from the Cura frontend."
  5360. msgstr ""
  5361. #: fdmprinter.def.json
  5362. msgctxt "center_object label"
  5363. msgid "Center Object"
  5364. msgstr ""
  5365. #: fdmprinter.def.json
  5366. msgctxt "center_object description"
  5367. msgid "Whether to center the object on the middle of the build platform (0,0), instead of using the coordinate system in which the object was saved."
  5368. msgstr ""
  5369. #: fdmprinter.def.json
  5370. msgctxt "mesh_position_x label"
  5371. msgid "Mesh Position X"
  5372. msgstr ""
  5373. #: fdmprinter.def.json
  5374. msgctxt "mesh_position_x description"
  5375. msgid "Offset applied to the object in the x direction."
  5376. msgstr ""
  5377. #: fdmprinter.def.json
  5378. msgctxt "mesh_position_y label"
  5379. msgid "Mesh Position Y"
  5380. msgstr ""
  5381. #: fdmprinter.def.json
  5382. msgctxt "mesh_position_y description"
  5383. msgid "Offset applied to the object in the y direction."
  5384. msgstr ""
  5385. #: fdmprinter.def.json
  5386. msgctxt "mesh_position_z label"
  5387. msgid "Mesh Position Z"
  5388. msgstr ""
  5389. #: fdmprinter.def.json
  5390. msgctxt "mesh_position_z description"
  5391. msgid "Offset applied to the object in the z direction. With this you can perform what was used to be called 'Object Sink'."
  5392. msgstr ""
  5393. #: fdmprinter.def.json
  5394. msgctxt "mesh_rotation_matrix label"
  5395. msgid "Mesh Rotation Matrix"
  5396. msgstr ""
  5397. #: fdmprinter.def.json
  5398. msgctxt "mesh_rotation_matrix description"
  5399. msgid "Transformation matrix to be applied to the model when loading it from file."
  5400. msgstr ""