Cura/resources/definitions/elegoo_neptune_4plus.def.json

{
    "version": 2,
    "name": "ELEGOO NEPTUNE 4 Plus",
    "inherits": "elegoo_neptune_4",
    "metadata":
    {
        "visible": true,
        "author": "mastercaution",
        "quality_definition": "elegoo_neptune_4"
    },
    "overrides":
    {
        "acceleration_print":
        {
            "default_value": 4000,
            "value": 4000
        },
        "machine_acceleration": { "value": 4000 },
        "machine_depth": { "default_value": 330 },
        "machine_height": { "default_value": 387 },
        "machine_max_acceleration_e": { "value": 5000 },
        "machine_max_acceleration_x": { "value": 20000 },
        "machine_max_acceleration_y": { "value": 20000 },
        "machine_name": { "default_value": "ELEGOO NEPTUNE 4 Plus" },
        "machine_start_gcode": { "default_value": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140 ;Start heating extruder\nM190 S{material_bed_temperature_layer_0} ;Wait for the bed to reach print temp\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0 F6000\nG1 Z0 F300\nM109 S{material_print_temperature_layer_0} ;Wait for extruder to reach print temp\nG92 E0 ;Reset Extruder\nG1 X115 Y0 Z0.4 F300 ;Move to start position\nG1 X215 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder" },
        "machine_width": { "default_value": 330 },
        "nozzle_disallowed_areas":
        {
            "default_value": [
                [
                    [-165, -165],
                    [-165, 165],
                    [-161, 165],
                    [-161, -165]
                ],
                [
                    [165, 165],
                    [165, -165],
                    [161, -165],
                    [161, 165]
                ],
                [
                    [-165, -165],
                    [165, -165],
                    [-165, -161],
                    [165, -161]
                ],
                [
                    [-165, 165],
                    [165, 165],
                    [-165, 161],
                    [165, 161]
                ]
            ]
        }
    }
}