Cura/resources/quality/fusion3/fusion3_0.8_PETG_rapid.inst.cfg

[general]
definition = fusion3
name = Rapid Quality
version = 4

[metadata]
material = generic_petg
quality_type = rapid
setting_version = 21
type = quality
variant = 0.8mm Nozzle

[values]
cool_fan_enabled = True
cool_fan_full_layer = 60
cool_fan_speed = 75
cool_fan_speed_min = 15
cool_min_layer_time = 5
cool_min_layer_time_fan_speed_max = 20
infill_overlap = 20
infill_sparse_density = 30
inset_direction = outside_in
layer_height_0 = 0.4
line_width = 0.8
material_bed_temperature = 65
material_flow = 97
material_flow_layer_0 = 97
material_print_temperature = 275
retract_at_layer_change = False
retraction_amount = 5
retraction_combing = noskin
retraction_combing_max_distance = 10
retraction_speed = 115
skirt_gap = 5
speed_print = 65
support_angle = 45
support_enable = True
support_infill_rate = 30
top_bottom_thickness = 1.2
wall_thickness = 1.6
xy_offset_layer_0 = -0.15
zig_zaggify_infill = True