Cura/resources/i18n/fdmprinter.def.json.pot

#
msgid ""
msgstr ""
"Project-Id-Version: Uranium json setting files\n"
"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
"POT-Creation-Date: 2023-03-21 13:32+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"






#: fdmprinter.def.json
msgctxt "machine_settings label"
msgid "Machine"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_settings description"
msgid "Machine specific settings"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_name label"
msgid "Machine Type"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_name description"
msgid "The name of your 3D printer model."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_show_variants label"
msgid "Show Machine Variants"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_show_variants description"
msgid "Whether to show the different variants of this machine, which are described in separate json files."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_start_gcode label"
msgid "Start G-code"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_start_gcode description"
msgid "G-code commands to be executed at the very start - separated by \n."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_end_gcode label"
msgid "End G-code"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_end_gcode description"
msgid "G-code commands to be executed at the very end - separated by \n."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_guid label"
msgid "Material GUID"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_guid description"
msgid "GUID of the material. This is set automatically."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_diameter label"
msgid "Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_diameter description"
msgid "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temp_wait label"
msgid "Wait for Build Plate Heatup"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temp_wait description"
msgid "Whether to insert a command to wait until the build plate temperature is reached at the start."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temp_wait label"
msgid "Wait for Nozzle Heatup"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temp_wait description"
msgid "Whether to wait until the nozzle temperature is reached at the start."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temp_prepend label"
msgid "Include Material Temperatures"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temp_prepend description"
msgid "Whether to include nozzle temperature commands at the start of the gcode. When the start_gcode already contains nozzle temperature commands Cura frontend will automatically disable this setting."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temp_prepend label"
msgid "Include Build Plate Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temp_prepend description"
msgid "Whether to include build plate temperature commands at the start of the gcode. When the start_gcode already contains build plate temperature commands Cura frontend will automatically disable this setting."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_width label"
msgid "Machine Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_width description"
msgid "The width (X-direction) of the printable area."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_depth label"
msgid "Machine Depth"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_depth description"
msgid "The depth (Y-direction) of the printable area."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_height label"
msgid "Machine Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_height description"
msgid "The height (Z-direction) of the printable area."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_shape label"
msgid "Build Plate Shape"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_shape description"
msgid "The shape of the build plate without taking unprintable areas into account."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_shape option rectangular"
msgid "Rectangular"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_shape option elliptic"
msgid "Elliptic"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_buildplate_type label"
msgid "Build Plate Material"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_buildplate_type description"
msgid "The material of the build plate installed on the printer."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_buildplate_type option glass"
msgid "Glass"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_buildplate_type option aluminum"
msgid "Aluminum"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heated_bed label"
msgid "Has Heated Build Plate"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heated_bed description"
msgid "Whether the machine has a heated build plate present."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heated_build_volume label"
msgid "Has Build Volume Temperature Stabilization"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heated_build_volume description"
msgid "Whether the machine is able to stabilize the build volume temperature."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_always_write_active_tool label"
msgid "Always Write Active Tool"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_always_write_active_tool description"
msgid "Write active tool after sending temp commands to inactive tool. Required for Dual Extruder printing with Smoothie or other firmware with modal tool commands."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_center_is_zero label"
msgid "Is Center Origin"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_center_is_zero description"
msgid "Whether the X/Y coordinates of the zero position of the printer is at the center of the printable area."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruder_count label"
msgid "Number of Extruders"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruder_count description"
msgid "Number of extruder trains. An extruder train is the combination of a feeder, bowden tube, and nozzle."
msgstr ""

#: fdmprinter.def.json
msgctxt "extruders_enabled_count label"
msgid "Number of Extruders That Are Enabled"
msgstr ""

#: fdmprinter.def.json
msgctxt "extruders_enabled_count description"
msgid "Number of extruder trains that are enabled; automatically set in software"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_tip_outer_diameter label"
msgid "Outer Nozzle Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_tip_outer_diameter description"
msgid "The outer diameter of the tip of the nozzle."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_head_distance label"
msgid "Nozzle Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_head_distance description"
msgid "The height difference between the tip of the nozzle and the lowest part of the print head."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_expansion_angle label"
msgid "Nozzle Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_expansion_angle description"
msgid "The angle between the horizontal plane and the conical part right above the tip of the nozzle."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heat_zone_length label"
msgid "Heat Zone Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heat_zone_length description"
msgid "The distance from the tip of the nozzle in which heat from the nozzle is transferred to the filament."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_temp_enabled label"
msgid "Enable Nozzle Temperature Control"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_temp_enabled description"
msgid "Whether to control temperature from Cura. Turn this off to control nozzle temperature from outside of Cura."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_heat_up_speed label"
msgid "Heat Up Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_heat_up_speed description"
msgid "The speed (°C/s) by which the nozzle heats up averaged over the window of normal printing temperatures and the standby temperature."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_cool_down_speed label"
msgid "Cool Down Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_cool_down_speed description"
msgid "The speed (°C/s) by which the nozzle cools down averaged over the window of normal printing temperatures and the standby temperature."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_min_cool_heat_time_window label"
msgid "Minimal Time Standby Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_min_cool_heat_time_window description"
msgid "The minimal time an extruder has to be inactive before the nozzle is cooled. Only when an extruder is not used for longer than this time will it be allowed to cool down to the standby temperature."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor label"
msgid "G-code Flavor"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor description"
msgid "The type of g-code to be generated."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option RepRap (Marlin/Sprinter)"
msgid "Marlin"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option RepRap (Volumetric)"
msgid "Marlin (Volumetric)"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option RepRap (RepRap)"
msgid "RepRap"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option UltiGCode"
msgid "Ultimaker 2"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option Griffin"
msgid "Griffin"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option Makerbot"
msgid "Makerbot"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option BFB"
msgid "Bits from Bytes"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option MACH3"
msgid "Mach3"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option Repetier"
msgid "Repetier"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_firmware_retract label"
msgid "Firmware Retraction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_firmware_retract description"
msgid "Whether to use firmware retract commands (G10/G11) instead of using the E property in G1 commands to retract the material."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruders_share_heater label"
msgid "Extruders Share Heater"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruders_share_heater description"
msgid "Whether the extruders share a single heater rather than each extruder having its own heater."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruders_share_nozzle label"
msgid "Extruders Share Nozzle"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruders_share_nozzle description"
msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
msgid "Shared Nozzle Initial Retraction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_disallowed_areas label"
msgid "Disallowed Areas"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_disallowed_areas description"
msgid "A list of polygons with areas the print head is not allowed to enter."
msgstr ""

#: fdmprinter.def.json
msgctxt "nozzle_disallowed_areas label"
msgid "Nozzle Disallowed Areas"
msgstr ""

#: fdmprinter.def.json
msgctxt "nozzle_disallowed_areas description"
msgid "A list of polygons with areas the nozzle is not allowed to enter."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_head_with_fans_polygon label"
msgid "Machine Head & Fan Polygon"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_head_with_fans_polygon description"
msgid "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates."
msgstr ""

#: fdmprinter.def.json
msgctxt "gantry_height label"
msgid "Gantry Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "gantry_height description"
msgid "The height difference between the tip of the nozzle and the gantry system (X and Y axes)."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_id label"
msgid "Nozzle ID"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_id description"
msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_size label"
msgid "Nozzle Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_size description"
msgid "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_use_extruder_offset_to_offset_coords label"
msgid "Offset with Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_use_extruder_offset_to_offset_coords description"
msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_z label"
msgid "Extruder Prime Z Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_z description"
msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_abs label"
msgid "Absolute Extruder Prime Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_abs description"
msgid "Make the extruder prime position absolute rather than relative to the last-known location of the head."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_x label"
msgid "Maximum Speed X"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_x description"
msgid "The maximum speed for the motor of the X-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_y label"
msgid "Maximum Speed Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_y description"
msgid "The maximum speed for the motor of the Y-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_z label"
msgid "Maximum Speed Z"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_z description"
msgid "The maximum speed for the motor of the Z-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_e label"
msgid "Maximum Speed E"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_e description"
msgid "The maximum speed of the filament."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_x label"
msgid "Maximum Acceleration X"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_x description"
msgid "Maximum acceleration for the motor of the X-direction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_y label"
msgid "Maximum Acceleration Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_y description"
msgid "Maximum acceleration for the motor of the Y-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_z label"
msgid "Maximum Acceleration Z"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_z description"
msgid "Maximum acceleration for the motor of the Z-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_e label"
msgid "Maximum Filament Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_e description"
msgid "Maximum acceleration for the motor of the filament."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_acceleration label"
msgid "Default Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_acceleration description"
msgid "The default acceleration of print head movement."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_xy label"
msgid "Default X-Y Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_xy description"
msgid "Default jerk for movement in the horizontal plane."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_z label"
msgid "Default Z Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_z description"
msgid "Default jerk for the motor of the Z-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_e label"
msgid "Default Filament Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_e description"
msgid "Default jerk for the motor of the filament."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_x label"
msgid "Steps per Millimeter (X)"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_x description"
msgid "How many steps of the stepper motor will result in one millimeter of movement in the X direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_y label"
msgid "Steps per Millimeter (Y)"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_y description"
msgid "How many steps of the stepper motor will result in one millimeter of movement in the Y direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_z label"
msgid "Steps per Millimeter (Z)"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_z description"
msgid "How many steps of the stepper motor will result in one millimeter of movement in the Z direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_e label"
msgid "Steps per Millimeter (E)"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_e description"
msgid "How many steps of the stepper motors will result in moving the feeder wheel by one millimeter around its circumference."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_x label"
msgid "X Endstop in Positive Direction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_x description"
msgid "Whether the endstop of the X axis is in the positive direction (high X coordinate) or negative (low X coordinate)."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_y label"
msgid "Y Endstop in Positive Direction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_y description"
msgid "Whether the endstop of the Y axis is in the positive direction (high Y coordinate) or negative (low Y coordinate)."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_z label"
msgid "Z Endstop in Positive Direction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_z description"
msgid "Whether the endstop of the Z axis is in the positive direction (high Z coordinate) or negative (low Z coordinate)."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_minimum_feedrate label"
msgid "Minimum Feedrate"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_minimum_feedrate description"
msgid "The minimal movement speed of the print head."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_feeder_wheel_diameter label"
msgid "Feeder Wheel Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_feeder_wheel_diameter description"
msgid "The diameter of the wheel that drives the material in the feeder."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_scale_fan_speed_zero_to_one label"
msgid "Scale Fan Speed To 0-1"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_scale_fan_speed_zero_to_one description"
msgid "Scale the fan speed to be between 0 and 1 instead of between 0 and 256."
msgstr ""

#: fdmprinter.def.json
msgctxt "resolution label"
msgid "Quality"
msgstr ""

#: fdmprinter.def.json
msgctxt "resolution description"
msgid "All settings that influence the resolution of the print. These settings have a large impact on the quality (and print time)"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_height label"
msgid "Layer Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_height description"
msgid "The height of each layer in mm. Higher values produce faster prints in lower resolution, lower values produce slower prints in higher resolution."
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_height_0 label"
msgid "Initial Layer Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_height_0 description"
msgid "The height of the initial layer in mm. A thicker initial layer makes adhesion to the build plate easier."
msgstr ""

#: fdmprinter.def.json
msgctxt "line_width label"
msgid "Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "line_width description"
msgid "Width of a single line. Generally, the width of each line should correspond to the width of the nozzle. However, slightly reducing this value could produce better prints."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width label"
msgid "Wall Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width description"
msgid "Width of a single wall line."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width_0 label"
msgid "Outer Wall Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width_0 description"
msgid "Width of the outermost wall line. By lowering this value, higher levels of detail can be printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width_x label"
msgid "Inner Wall(s) Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width_x description"
msgid "Width of a single wall line for all wall lines except the outermost one."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_line_width label"
msgid "Top/Bottom Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_line_width description"
msgid "Width of a single top/bottom line."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_line_width label"
msgid "Infill Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_line_width description"
msgid "Width of a single infill line."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_line_width label"
msgid "Skirt/Brim Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_line_width description"
msgid "Width of a single skirt or brim line."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_line_width label"
msgid "Support Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_line_width description"
msgid "Width of a single support structure line."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_line_width label"
msgid "Support Interface Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_line_width description"
msgid "Width of a single line of support roof or floor."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_line_width label"
msgid "Support Roof Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_line_width description"
msgid "Width of a single support roof line."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_line_width label"
msgid "Support Floor Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_line_width description"
msgid "Width of a single support floor line."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_line_width label"
msgid "Prime Tower Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_line_width description"
msgid "Width of a single prime tower line."
msgstr ""

#: fdmprinter.def.json
msgctxt "initial_layer_line_width_factor label"
msgid "Initial Layer Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "initial_layer_line_width_factor description"
msgid "Multiplier of the line width on the first layer. Increasing this could improve bed adhesion."
msgstr ""

#: fdmprinter.def.json
msgctxt "shell label"
msgid "Walls"
msgstr ""

#: fdmprinter.def.json
msgctxt "shell description"
msgid "Shell"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_extruder_nr label"
msgid "Wall Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_extruder_nr description"
msgid "The extruder train used for printing the walls. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_extruder_nr label"
msgid "Outer Wall Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_extruder_nr description"
msgid "The extruder train used for printing the outer wall. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_x_extruder_nr label"
msgid "Inner Wall Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_x_extruder_nr description"
msgid "The extruder train used for printing the inner walls. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_thickness label"
msgid "Wall Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_thickness description"
msgid "The thickness of the walls in the horizontal direction. This value divided by the wall line width defines the number of walls."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_count label"
msgid "Wall Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_count description"
msgid "The number of walls. When calculated by the wall thickness, this value is rounded to a whole number."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_transition_length label"
msgid "Wall Transition Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_transition_length description"
msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_distribution_count label"
msgid "Wall Distribution Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_distribution_count description"
msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_transition_angle label"
msgid "Wall Transitioning Threshold Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_transition_angle description"
msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_transition_filter_distance label"
msgid "Wall Transitioning Filter Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_transition_filter_distance description"
msgid "If it would be transitioning back and forth between different numbers of walls in quick succession, don't transition at all. Remove transitions if they are closer together than this distance."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_transition_filter_deviation label"
msgid "Wall Transitioning Filter Margin"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_transition_filter_deviation description"
msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_wipe_dist label"
msgid "Outer Wall Wipe Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_wipe_dist description"
msgid "Distance of a travel move inserted after the outer wall, to hide the Z seam better."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_inset label"
msgid "Outer Wall Inset"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_inset description"
msgid "Inset applied to the path of the outer wall. If the outer wall is smaller than the nozzle, and printed after the inner walls, use this offset to get the hole in the nozzle to overlap with the inner walls instead of the outside of the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "optimize_wall_printing_order label"
msgid "Optimize Wall Printing Order"
msgstr ""

#: fdmprinter.def.json
msgctxt "optimize_wall_printing_order description"
msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization. First layer is not optimized when choosing brim as build plate adhesion type."
msgstr ""

#: fdmprinter.def.json
msgctxt "inset_direction label"
msgid "Wall Ordering"
msgstr ""

#: fdmprinter.def.json
msgctxt "inset_direction description"
msgid "Determines the order in which walls are printed. Printing outer walls earlier helps with dimensional accuracy, as faults from inner walls cannot propagate to the outside. However printing them later allows them to stack better when overhangs are printed. When there is an uneven amount of total innner walls, the 'center last line' is always printed last."
msgstr ""

#: fdmprinter.def.json
msgctxt "inset_direction option inside_out"
msgid "Inside To Outside"
msgstr ""

#: fdmprinter.def.json
msgctxt "inset_direction option outside_in"
msgid "Outside To Inside"
msgstr ""

#: fdmprinter.def.json
msgctxt "alternate_extra_perimeter label"
msgid "Alternate Extra Wall"
msgstr ""

#: fdmprinter.def.json
msgctxt "alternate_extra_perimeter description"
msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
msgstr ""

#: fdmprinter.def.json
msgctxt "min_wall_line_width label"
msgid "Minimum Wall Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "min_wall_line_width description"
msgid "For thin structures around once or twice the nozzle size, the line widths need to be altered to adhere to the thickness of the model. This setting controls the minimum line width allowed for the walls. The minimum line widths inherently also determine the maximum line widths, since we transition from N to N+1 walls at some geometry thickness where the N walls are wide and the N+1 walls are narrow. The widest possible wall line is twice the Minimum Wall Line Width."
msgstr ""

#: fdmprinter.def.json
msgctxt "min_even_wall_line_width label"
msgid "Minimum Even Wall Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "min_even_wall_line_width description"
msgid "The minimum line width for normal polygonal walls. This setting determines at which model thickness we switch from printing a single thin wall line, to printing two wall lines. A higher Minimum Even Wall Line Width leads to a higher maximum odd wall line width. The maximum even wall line width is calculated as Outer Wall Line Width + 0.5 * Minimum Odd Wall Line Width."
msgstr ""

#: fdmprinter.def.json
msgctxt "min_odd_wall_line_width label"
msgid "Minimum Odd Wall Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "min_odd_wall_line_width description"
msgid "The minimum line width for middle line gap filler polyline walls. This setting determines at which model thickness we switch from printing two wall lines, to printing two outer walls and a single central wall in the middle. A higher Minimum Odd Wall Line Width leads to a higher maximum even wall line width. The maximum odd wall line width is calculated as 2 * Minimum Even Wall Line Width."
msgstr ""

#: fdmprinter.def.json
msgctxt "fill_outline_gaps label"
msgid "Print Thin Walls"
msgstr ""

#: fdmprinter.def.json
msgctxt "fill_outline_gaps description"
msgid "Print pieces of the model which are horizontally thinner than the nozzle size."
msgstr ""

#: fdmprinter.def.json
msgctxt "min_feature_size label"
msgid "Minimum Feature Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "min_feature_size description"
msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum Feature Size will be widened to the Minimum Wall Line Width."
msgstr ""

#: fdmprinter.def.json
msgctxt "min_bead_width label"
msgid "Minimum Thin Wall Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "min_bead_width description"
msgid "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself."
msgstr ""

#: fdmprinter.def.json
msgctxt "xy_offset label"
msgid "Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "xy_offset description"
msgid "Amount of offset applied to all polygons in each layer. Positive values can compensate for too big holes; negative values can compensate for too small holes."
msgstr ""

#: fdmprinter.def.json
msgctxt "xy_offset_layer_0 label"
msgid "Initial Layer Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "xy_offset_layer_0 description"
msgid "Amount of offset applied to all polygons in the first layer. A negative value can compensate for squishing of the first layer known as \"elephant's foot\"."
msgstr ""

#: fdmprinter.def.json
msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "hole_xy_offset description"
msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
msgstr ""

#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type label"
msgid "Z Seam Alignment"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type description"
msgid "Starting point of each path in a layer. When paths in consecutive layers start at the same point a vertical seam may show on the print. When aligning these near a user specified location, the seam is easiest to remove. When placed randomly the inaccuracies at the paths' start will be less noticeable. When taking the shortest path the print will be quicker."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type option back"
msgid "User Specified"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type option shortest"
msgid "Shortest"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type option random"
msgid "Random"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type option sharpest_corner"
msgid "Sharpest Corner"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position label"
msgid "Z Seam Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position description"
msgid "The position near where to start printing each part in a layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option backleft"
msgid "Back Left"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option back"
msgid "Back"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option backright"
msgid "Back Right"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option right"
msgid "Right"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option frontright"
msgid "Front Right"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option front"
msgid "Front"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option frontleft"
msgid "Front Left"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option left"
msgid "Left"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_x label"
msgid "Z Seam X"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_x description"
msgid "The X coordinate of the position near where to start printing each part in a layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_y label"
msgid "Z Seam Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_y description"
msgid "The Y coordinate of the position near where to start printing each part in a layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner label"
msgid "Seam Corner Preference"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner description"
msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner. Smart Hiding allows both inside and outside corners, but chooses inside corners more frequently, if appropriate."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner option z_seam_corner_none"
msgid "None"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner option z_seam_corner_inner"
msgid "Hide Seam"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner option z_seam_corner_outer"
msgid "Expose Seam"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner option z_seam_corner_any"
msgid "Hide or Expose Seam"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner option z_seam_corner_weighted"
msgid "Smart Hiding"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_relative label"
msgid "Z Seam Relative"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_relative description"
msgid "When enabled, the z seam coordinates are relative to each part's centre. When disabled, the coordinates define an absolute position on the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom label"
msgid "Top/Bottom"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom description"
msgid "Top/Bottom"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_extruder_nr label"
msgid "Top Surface Skin Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_extruder_nr description"
msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_layer_count label"
msgid "Top Surface Skin Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_layer_count description"
msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_line_width label"
msgid "Top Surface Skin Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_line_width description"
msgid "Width of a single line of the areas at the top of the print."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_pattern label"
msgid "Top Surface Skin Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_pattern description"
msgid "The pattern of the top most layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_monotonic label"
msgid "Monotonic Top Surface Order"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_monotonic description"
msgid "Print top surface lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_angles label"
msgid "Top Surface Skin Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_angles description"
msgid "A list of integer line directions to use when the top surface skin layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_extruder_nr label"
msgid "Top/Bottom Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_extruder_nr description"
msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_thickness label"
msgid "Top/Bottom Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_thickness description"
msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_thickness label"
msgid "Top Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_thickness description"
msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_layers label"
msgid "Top Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_layers description"
msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_thickness label"
msgid "Bottom Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_thickness description"
msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_layers label"
msgid "Bottom Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_layers description"
msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
msgstr ""

#: fdmprinter.def.json
msgctxt "initial_bottom_layers label"
msgid "Initial Bottom Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "initial_bottom_layers description"
msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern label"
msgid "Top/Bottom Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern description"
msgid "The pattern of the top/bottom layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern_0 label"
msgid "Bottom Pattern Initial Layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern_0 description"
msgid "The pattern on the bottom of the print on the first layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern_0 option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern_0 option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern_0 option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "connect_skin_polygons label"
msgid "Connect Top/Bottom Polygons"
msgstr ""

#: fdmprinter.def.json
msgctxt "connect_skin_polygons description"
msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_monotonic label"
msgid "Monotonic Top/Bottom Order"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_monotonic description"
msgid "Print top/bottom lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_angles label"
msgid "Top/Bottom Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_angles description"
msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
msgstr ""

#: fdmprinter.def.json
msgctxt "small_skin_width label"
msgid "Small Top/Bottom Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "small_skin_width description"
msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_no_small_gaps_heuristic label"
msgid "No Skin in Z Gaps"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_no_small_gaps_heuristic description"
msgid "When the model has small vertical gaps of only a few layers, there should normally be skin around those layers in the narrow space. Enable this setting to not generate skin if the vertical gap is very small. This improves printing time and slicing time, but technically leaves infill exposed to the air."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_outline_count label"
msgid "Extra Skin Wall Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_outline_count description"
msgid "Replaces the outermost part of the top/bottom pattern with a number of concentric lines. Using one or two lines improves roofs that start on infill material."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_enabled label"
msgid "Enable Ironing"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_enabled description"
msgid "Go over the top surface one additional time, but this time extruding very little material. This is meant to melt the plastic on top further, creating a smoother surface. The pressure in the nozzle chamber is kept high so that the creases in the surface are filled with material."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_only_highest_layer label"
msgid "Iron Only Highest Layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_only_highest_layer description"
msgid "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_pattern label"
msgid "Ironing Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_pattern description"
msgid "The pattern to use for ironing top surfaces."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_monotonic label"
msgid "Monotonic Ironing Order"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_monotonic description"
msgid "Print ironing lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_line_spacing label"
msgid "Ironing Line Spacing"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_line_spacing description"
msgid "The distance between the lines of ironing."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_flow label"
msgid "Ironing Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_flow description"
msgid "The amount of material, relative to a normal skin line, to extrude during ironing. Keeping the nozzle filled helps filling some of the crevices of the top surface, but too much results in overextrusion and blips on the side of the surface."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_inset label"
msgid "Ironing Inset"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_inset description"
msgid "A distance to keep from the edges of the model. Ironing all the way to the edge of the mesh may result in a jagged edge on your print."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_ironing label"
msgid "Ironing Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_ironing description"
msgid "The speed at which to pass over the top surface."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_ironing label"
msgid "Ironing Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_ironing description"
msgid "The acceleration with which ironing is performed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_ironing label"
msgid "Ironing Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_ironing description"
msgid "The maximum instantaneous velocity change while performing ironing."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_overlap label"
msgid "Skin Overlap Percentage"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_overlap description"
msgid "Adjust the amount of overlap between the walls and (the endpoints of) the skin-centerlines, as a percentage of the line widths of the skin lines and the innermost wall. A slight overlap allows the walls to connect firmly to the skin. Note that, given an equal skin and wall line-width, any percentage over 50% may already cause any skin to go past the wall, because at that point the position of the nozzle of the skin-extruder may already reach past the middle of the wall."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_overlap_mm label"
msgid "Skin Overlap"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_overlap_mm description"
msgid "Adjust the amount of overlap between the walls and (the endpoints of) the skin-centerlines. A slight overlap allows the walls to connect firmly to the skin. Note that, given an equal skin and wall line-width, any value over half the width of the wall may already cause any skin to go past the wall, because at that point the position of the nozzle of the skin-extruder may already reach past the middle of the wall."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_preshrink label"
msgid "Skin Removal Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_preshrink description"
msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_skin_preshrink label"
msgid "Top Skin Removal Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_skin_preshrink description"
msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_skin_preshrink label"
msgid "Bottom Skin Removal Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_skin_preshrink description"
msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "expand_skins_expand_distance label"
msgid "Skin Expand Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "expand_skins_expand_distance description"
msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_skin_expand_distance label"
msgid "Top Skin Expand Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_skin_expand_distance description"
msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_skin_expand_distance label"
msgid "Bottom Skin Expand Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_skin_expand_distance description"
msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "max_skin_angle_for_expansion label"
msgid "Maximum Skin Angle for Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "max_skin_angle_for_expansion description"
msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
msgstr ""

#: fdmprinter.def.json
msgctxt "min_skin_width_for_expansion label"
msgid "Minimum Skin Width for Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "min_skin_width_for_expansion description"
msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill label"
msgid "Infill"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill description"
msgid "Infill"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_extruder_nr label"
msgid "Infill Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_extruder_nr description"
msgid "The extruder train used for printing infill. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_sparse_density label"
msgid "Infill Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_sparse_density description"
msgid "Adjusts the density of infill of the print."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_line_distance label"
msgid "Infill Line Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_line_distance description"
msgid "Distance between the printed infill lines. This setting is calculated by the infill density and the infill line width."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern label"
msgid "Infill Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern description"
msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option grid"
msgid "Grid"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option triangles"
msgid "Triangles"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option trihexagon"
msgid "Tri-Hexagon"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option cubic"
msgid "Cubic"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option cubicsubdiv"
msgid "Cubic Subdivision"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option tetrahedral"
msgid "Octet"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option quarter_cubic"
msgid "Quarter Cubic"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option cross"
msgid "Cross"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option cross_3d"
msgid "Cross 3D"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option gyroid"
msgid "Gyroid"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option lightning"
msgid "Lightning"
msgstr ""

#: fdmprinter.def.json
msgctxt "zig_zaggify_infill label"
msgid "Connect Infill Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "zig_zaggify_infill description"
msgid "Connect the ends where the infill pattern meets the inner wall using a line which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduce the effects of infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "connect_infill_polygons label"
msgid "Connect Infill Polygons"
msgstr ""

#: fdmprinter.def.json
msgctxt "connect_infill_polygons description"
msgid "Connect infill paths where they run next to each other. For infill patterns which consist of several closed polygons, enabling this setting greatly reduces the travel time."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_angles label"
msgid "Infill Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_angles description"
msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees for the lines and zig zag patterns and 45 degrees for all other patterns)."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_offset_x label"
msgid "Infill X Offset"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_offset_x description"
msgid "The infill pattern is moved this distance along the X axis."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_offset_y label"
msgid "Infill Y Offset"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_offset_y description"
msgid "The infill pattern is moved this distance along the Y axis."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_randomize_start_location label"
msgid "Randomize Infill Start"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_randomize_start_location description"
msgid "Randomize which infill line is printed first. This prevents one segment becoming the strongest, but it does so at the cost of an additional travel move."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_multiplier label"
msgid "Infill Line Multiplier"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_multiplier description"
msgid "Convert each infill line to this many lines. The extra lines do not cross over each other, but avoid each other. This makes the infill stiffer, but increases print time and material usage."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_wall_line_count label"
msgid "Extra Infill Wall Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_wall_line_count description"
msgid "Add extra walls around the infill area. Such walls can make top/bottom skin lines sag down less which means you need less top/bottom skin layers for the same quality at the cost of some extra material.\nThis feature can combine with the Connect Infill Polygons to connect all the infill into a single extrusion path without the need for travels or retractions if configured right."
msgstr ""

#: fdmprinter.def.json
msgctxt "sub_div_rad_add label"
msgid "Cubic Subdivision Shell"
msgstr ""

#: fdmprinter.def.json
msgctxt "sub_div_rad_add description"
msgid "An addition to the radius from the center of each cube to check for the boundary of the model, as to decide whether this cube should be subdivided. Larger values lead to a thicker shell of small cubes near the boundary of the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_overlap label"
msgid "Infill Overlap Percentage"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_overlap description"
msgid "The amount of overlap between the infill and the walls as a percentage of the infill line width. A slight overlap allows the walls to connect firmly to the infill."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_overlap_mm label"
msgid "Infill Overlap"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_overlap_mm description"
msgid "The amount of overlap between the infill and the walls. A slight overlap allows the walls to connect firmly to the infill."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_wipe_dist label"
msgid "Infill Wipe Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_wipe_dist description"
msgid "Distance of a travel move inserted after every infill line, to make the infill stick to the walls better. This option is similar to infill overlap, but without extrusion and only on one end of the infill line."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_sparse_thickness label"
msgid "Infill Layer Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_sparse_thickness description"
msgid "The thickness per layer of infill material. This value should always be a multiple of the layer height and is otherwise rounded."
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_infill_steps label"
msgid "Gradual Infill Steps"
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_infill_steps description"
msgid "Number of times to reduce the infill density by half when getting further below top surfaces. Areas which are closer to top surfaces get a higher density, up to the Infill Density."
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_infill_step_height label"
msgid "Gradual Infill Step Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_infill_step_height description"
msgid "The height of infill of a given density before switching to half the density."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_before_walls label"
msgid "Infill Before Walls"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_before_walls description"
msgid "Print the infill before printing the walls. Printing the walls first may lead to more accurate walls, but overhangs print worse. Printing the infill first leads to sturdier walls, but the infill pattern might sometimes show through the surface."
msgstr ""

#: fdmprinter.def.json
msgctxt "min_infill_area label"
msgid "Minimum Infill Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "min_infill_area description"
msgid "Don't generate areas of infill smaller than this (use skin instead)."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_support_enabled label"
msgid "Infill Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_support_enabled description"
msgid "Print infill structures only where tops of the model should be supported. Enabling this reduces print time and material usage, but leads to ununiform object strength."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_support_angle label"
msgid "Infill Overhang Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_support_angle description"
msgid "The minimum angle of internal overhangs for which infill is added. At a value of 0° objects are totally filled with infill, 90° will not provide any infill."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_edge_support_thickness label"
msgid "Skin Edge Support Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_edge_support_thickness description"
msgid "The thickness of the extra infill that supports skin edges."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_edge_support_layers label"
msgid "Skin Edge Support Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_edge_support_layers description"
msgid "The number of infill layers that supports skin edges."
msgstr ""

#: fdmprinter.def.json
msgctxt "lightning_infill_support_angle label"
msgid "Lightning Infill Support Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "lightning_infill_support_angle description"
msgid "Determines when a lightning infill layer has to support anything above it. Measured in the angle given the thickness of a layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "lightning_infill_overhang_angle label"
msgid "Lightning Infill Overhang Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "lightning_infill_overhang_angle description"
msgid "Determines when a lightning infill layer has to support the model above it. Measured in the angle given the thickness."
msgstr ""

#: fdmprinter.def.json
msgctxt "lightning_infill_prune_angle label"
msgid "Lightning Infill Prune Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "lightning_infill_prune_angle description"
msgid "The endpoints of infill lines are shortened to save on material. This setting is the angle of overhang of the endpoints of these lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "lightning_infill_straightening_angle label"
msgid "Lightning Infill Straightening Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "lightning_infill_straightening_angle description"
msgid "The infill lines are straightened out to save on printing time. This is the maximum angle of overhang allowed across the length of the infill line."
msgstr ""

#: fdmprinter.def.json
msgctxt "material label"
msgid "Material"
msgstr ""

#: fdmprinter.def.json
msgctxt "material description"
msgid "Material"
msgstr ""

#: fdmprinter.def.json
msgctxt "default_material_print_temperature label"
msgid "Default Printing Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "default_material_print_temperature description"
msgid "The default temperature used for printing. This should be the \"base\" temperature of a material. All other print temperatures should use offsets based on this value"
msgstr ""

#: fdmprinter.def.json
msgctxt "build_volume_temperature label"
msgid "Build Volume Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "build_volume_temperature description"
msgid "The temperature of the environment to print in. If this is 0, the build volume temperature will not be adjusted."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temperature label"
msgid "Printing Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temperature description"
msgid "The temperature used for printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temperature_layer_0 label"
msgid "Printing Temperature Initial Layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temperature_layer_0 description"
msgid "The temperature used for printing the first layer. Set at 0 to disable special handling of the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_initial_print_temperature label"
msgid "Initial Printing Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_initial_print_temperature description"
msgid "The minimal temperature while heating up to the Printing Temperature at which printing can already start."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_final_print_temperature label"
msgid "Final Printing Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_final_print_temperature description"
msgid "The temperature to which to already start cooling down just before the end of printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_extrusion_cool_down_speed label"
msgid "Extrusion Cool Down Speed Modifier"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_extrusion_cool_down_speed description"
msgid "The extra speed by which the nozzle cools while extruding. The same value is used to signify the heat up speed lost when heating up while extruding."
msgstr ""

#: fdmprinter.def.json
msgctxt "default_material_bed_temperature label"
msgid "Default Build Plate Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "default_material_bed_temperature description"
msgid "The default temperature used for the heated build plate. This should be the \"base\" temperature of a build plate. All other print temperatures should use offsets based on this value"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temperature label"
msgid "Build Plate Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temperature description"
msgid "The temperature used for the heated build plate. If this is 0, the build plate is left unheated."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temperature_layer_0 label"
msgid "Build Plate Temperature Initial Layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temperature_layer_0 description"
msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_adhesion_tendency label"
msgid "Adhesion Tendency"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_adhesion_tendency description"
msgid "Surface adhesion tendency."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_surface_energy label"
msgid "Surface Energy"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_surface_energy description"
msgid "Surface energy."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_shrinkage_percentage label"
msgid "Scaling Factor Shrinkage Compensation"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_shrinkage_percentage description"
msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_shrinkage_percentage_xy label"
msgid "Horizontal Scaling Factor Shrinkage Compensation"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_shrinkage_percentage_xy description"
msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_shrinkage_percentage_z label"
msgid "Vertical Scaling Factor Shrinkage Compensation"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_shrinkage_percentage_z description"
msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the Z-direction (vertically)."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_crystallinity label"
msgid "Crystalline Material"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_crystallinity description"
msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_anti_ooze_retracted_position label"
msgid "Anti-ooze Retracted Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_anti_ooze_retracted_position description"
msgid "How far the material needs to be retracted before it stops oozing."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_anti_ooze_retraction_speed label"
msgid "Anti-ooze Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_anti_ooze_retraction_speed description"
msgid "How fast the material needs to be retracted during a filament switch to prevent oozing."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_retracted_position label"
msgid "Break Preparation Retracted Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_retracted_position description"
msgid "How far the filament can be stretched before it breaks, while heated."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_speed label"
msgid "Break Preparation Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_speed description"
msgid "How fast the filament needs to be retracted just before breaking it off in a retraction."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_temperature label"
msgid "Break Preparation Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_temperature description"
msgid "The temperature used to purge material, should be roughly equal to the highest possible printing temperature."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_retracted_position label"
msgid "Break Retracted Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_retracted_position description"
msgid "How far to retract the filament in order to break it cleanly."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_speed label"
msgid "Break Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_speed description"
msgid "The speed at which to retract the filament in order to break it cleanly."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_temperature label"
msgid "Break Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_temperature description"
msgid "The temperature at which the filament is broken for a clean break."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flush_purge_speed label"
msgid "Flush Purge Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flush_purge_speed description"
msgid "How fast to prime the material after switching to a different material."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flush_purge_length label"
msgid "Flush Purge Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flush_purge_length description"
msgid "How much material to use to purge the previous material out of the nozzle (in length of filament) when switching to a different material."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_end_of_filament_purge_speed label"
msgid "End of Filament Purge Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_end_of_filament_purge_speed description"
msgid "How fast to prime the material after replacing an empty spool with a fresh spool of the same material."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_end_of_filament_purge_length label"
msgid "End of Filament Purge Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_end_of_filament_purge_length description"
msgid "How much material to use to purge the previous material out of the nozzle (in length of filament) when replacing an empty spool with a fresh spool of the same material."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_maximum_park_duration label"
msgid "Maximum Park Duration"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_maximum_park_duration description"
msgid "How long the material can be kept out of dry storage safely."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_no_load_move_factor label"
msgid "No Load Move Factor"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_no_load_move_factor description"
msgid "A factor indicating how much the filament gets compressed between the feeder and the nozzle chamber, used to determine how far to move the material for a filament switch."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow label"
msgid "Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow description"
msgid "Flow compensation: the amount of material extruded is multiplied by this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_material_flow label"
msgid "Wall Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_material_flow description"
msgid "Flow compensation on wall lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_material_flow label"
msgid "Outer Wall Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_material_flow description"
msgid "Flow compensation on the outermost wall line."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_x_material_flow label"
msgid "Inner Wall(s) Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_x_material_flow description"
msgid "Flow compensation on wall lines for all wall lines except the outermost one."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_material_flow label"
msgid "Top/Bottom Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_material_flow description"
msgid "Flow compensation on top/bottom lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_material_flow label"
msgid "Top Surface Skin Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_material_flow description"
msgid "Flow compensation on lines of the areas at the top of the print."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_material_flow label"
msgid "Infill Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_material_flow description"
msgid "Flow compensation on infill lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_material_flow label"
msgid "Skirt/Brim Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_material_flow description"
msgid "Flow compensation on skirt or brim lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_material_flow label"
msgid "Support Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_material_flow description"
msgid "Flow compensation on support structure lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_material_flow label"
msgid "Support Interface Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_material_flow description"
msgid "Flow compensation on lines of support roof or floor."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_material_flow label"
msgid "Support Roof Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_material_flow description"
msgid "Flow compensation on support roof lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_material_flow label"
msgid "Support Floor Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_material_flow description"
msgid "Flow compensation on support floor lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_flow label"
msgid "Prime Tower Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_flow description"
msgid "Flow compensation on prime tower lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow_layer_0 label"
msgid "Initial Layer Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow_layer_0 description"
msgid "Flow compensation for the first layer: the amount of material extruded on the initial layer is multiplied by this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_x_material_flow_layer_0 label"
msgid "Initial Layer Inner Wall Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_x_material_flow_layer_0 description"
msgid "Flow compensation on wall lines for all wall lines except the outermost one, but only for the first layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_material_flow_layer_0 label"
msgid "Initial Layer Outer Wall Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_material_flow_layer_0 description"
msgid "Flow compensation on the outermost wall line of the first layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_material_flow_layer_0 label"
msgid "Initial Layer Bottom Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_material_flow_layer_0 description"
msgid "Flow compensation on bottom lines of the first layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_standby_temperature label"
msgid "Standby Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_standby_temperature description"
msgid "The temperature of the nozzle when another nozzle is currently used for printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed label"
msgid "Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed description"
msgid "Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_print label"
msgid "Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_print description"
msgid "The speed at which printing happens."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_infill label"
msgid "Infill Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_infill description"
msgid "The speed at which infill is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall label"
msgid "Wall Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall description"
msgid "The speed at which the walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall_0 label"
msgid "Outer Wall Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall_0 description"
msgid "The speed at which the outermost walls are printed. Printing the outer wall at a lower speed improves the final skin quality. However, having a large difference between the inner wall speed and the outer wall speed will affect quality in a negative way."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall_x label"
msgid "Inner Wall Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall_x description"
msgid "The speed at which all inner walls are printed. Printing the inner wall faster than the outer wall will reduce printing time. It works well to set this in between the outer wall speed and the infill speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_roofing label"
msgid "Top Surface Skin Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_roofing description"
msgid "The speed at which top surface skin layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_topbottom label"
msgid "Top/Bottom Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_topbottom description"
msgid "The speed at which top/bottom layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support label"
msgid "Support Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support description"
msgid "The speed at which the support structure is printed. Printing support at higher speeds can greatly reduce printing time. The surface quality of the support structure is not important since it is removed after printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_infill label"
msgid "Support Infill Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_infill description"
msgid "The speed at which the infill of support is printed. Printing the infill at lower speeds improves stability."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_interface label"
msgid "Support Interface Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_interface description"
msgid "The speed at which the roofs and floors of support are printed. Printing them at lower speeds can improve overhang quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_roof label"
msgid "Support Roof Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_roof description"
msgid "The speed at which the roofs of support are printed. Printing them at lower speeds can improve overhang quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_bottom label"
msgid "Support Floor Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_bottom description"
msgid "The speed at which the floor of support is printed. Printing it at lower speed can improve adhesion of support on top of your model."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_prime_tower label"
msgid "Prime Tower Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_prime_tower description"
msgid "The speed at which the prime tower is printed. Printing the prime tower slower can make it more stable when the adhesion between the different filaments is suboptimal."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_travel label"
msgid "Travel Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_travel description"
msgid "The speed at which travel moves are made."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_layer_0 label"
msgid "Initial Layer Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_layer_0 description"
msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_print_layer_0 label"
msgid "Initial Layer Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_print_layer_0 description"
msgid "The speed of printing for the initial layer. A lower value is advised to improve adhesion to the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_travel_layer_0 label"
msgid "Initial Layer Travel Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_travel_layer_0 description"
msgid "The speed of travel moves in the initial layer. A lower value is advised to prevent pulling previously printed parts away from the build plate. The value of this setting can automatically be calculated from the ratio between the Travel Speed and the Print Speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_speed label"
msgid "Skirt/Brim Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_speed description"
msgid "The speed at which the skirt and brim are printed. Normally this is done at the initial layer speed, but sometimes you might want to print the skirt or brim at a different speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_z_hop label"
msgid "Z Hop Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_z_hop description"
msgid "The speed at which the vertical Z movement is made for Z Hops. This is typically lower than the print speed since the build plate or machine's gantry is harder to move."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_slowdown_layers label"
msgid "Number of Slower Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_slowdown_layers description"
msgid "The first few layers are printed slower than the rest of the model, to get better adhesion to the build plate and improve the overall success rate of prints. The speed is gradually increased over these layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_equalize_flow_width_factor label"
msgid "Flow Equalization Ratio"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_equalize_flow_width_factor description"
msgid "Extrusion width based correction factor on the speed. At 0% the movement speed is kept constant at the Print Speed. At 100% the movement speed is adjusted so that the flow (in mm³/s) is kept constant, i.e. lines half the normal Line Width are printed twice as fast and lines twice as wide are printed half as fast. A value larger than 100% can help to compensate for the higher pressure required to extrude wide lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_enabled label"
msgid "Enable Acceleration Control"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_enabled description"
msgid "Enables adjusting the print head acceleration. Increasing the accelerations can reduce printing time at the cost of print quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_travel_enabled label"
msgid "Enable Travel Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_travel_enabled description"
msgid "Use a separate acceleration rate for travel moves. If disabled, travel moves will use the acceleration value of the printed line at their destination."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_print label"
msgid "Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_print description"
msgid "The acceleration with which printing happens."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_infill label"
msgid "Infill Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_infill description"
msgid "The acceleration with which infill is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall label"
msgid "Wall Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall description"
msgid "The acceleration with which the walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall_0 label"
msgid "Outer Wall Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall_0 description"
msgid "The acceleration with which the outermost walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall_x label"
msgid "Inner Wall Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall_x description"
msgid "The acceleration with which all inner walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_roofing label"
msgid "Top Surface Skin Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_roofing description"
msgid "The acceleration with which top surface skin layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_topbottom label"
msgid "Top/Bottom Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_topbottom description"
msgid "The acceleration with which top/bottom layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support label"
msgid "Support Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support description"
msgid "The acceleration with which the support structure is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_infill label"
msgid "Support Infill Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_infill description"
msgid "The acceleration with which the infill of support is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_interface label"
msgid "Support Interface Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_interface description"
msgid "The acceleration with which the roofs and floors of support are printed. Printing them at lower acceleration can improve overhang quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_roof label"
msgid "Support Roof Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_roof description"
msgid "The acceleration with which the roofs of support are printed. Printing them at lower acceleration can improve overhang quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_bottom label"
msgid "Support Floor Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_bottom description"
msgid "The acceleration with which the floors of support are printed. Printing them at lower acceleration can improve adhesion of support on top of your model."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_prime_tower label"
msgid "Prime Tower Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_prime_tower description"
msgid "The acceleration with which the prime tower is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_travel label"
msgid "Travel Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_travel description"
msgid "The acceleration with which travel moves are made."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_layer_0 label"
msgid "Initial Layer Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_layer_0 description"
msgid "The acceleration for the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_print_layer_0 label"
msgid "Initial Layer Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_print_layer_0 description"
msgid "The acceleration during the printing of the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_travel_layer_0 label"
msgid "Initial Layer Travel Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_travel_layer_0 description"
msgid "The acceleration for travel moves in the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_skirt_brim label"
msgid "Skirt/Brim Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_skirt_brim description"
msgid "The acceleration with which the skirt and brim are printed. Normally this is done with the initial layer acceleration, but sometimes you might want to print the skirt or brim at a different acceleration."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_enabled label"
msgid "Enable Jerk Control"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_enabled description"
msgid "Enables adjusting the jerk of print head when the velocity in the X or Y axis changes. Increasing the jerk can reduce printing time at the cost of print quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_travel_enabled label"
msgid "Enable Travel Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_travel_enabled description"
msgid "Use a separate jerk rate for travel moves. If disabled, travel moves will use the jerk value of the printed line at their destination."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_print label"
msgid "Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_print description"
msgid "The maximum instantaneous velocity change of the print head."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_infill label"
msgid "Infill Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_infill description"
msgid "The maximum instantaneous velocity change with which infill is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall label"
msgid "Wall Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall description"
msgid "The maximum instantaneous velocity change with which the walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall_0 label"
msgid "Outer Wall Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall_0 description"
msgid "The maximum instantaneous velocity change with which the outermost walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall_x label"
msgid "Inner Wall Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall_x description"
msgid "The maximum instantaneous velocity change with which all inner walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_roofing label"
msgid "Top Surface Skin Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_roofing description"
msgid "The maximum instantaneous velocity change with which top surface skin layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_topbottom label"
msgid "Top/Bottom Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_topbottom description"
msgid "The maximum instantaneous velocity change with which top/bottom layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support label"
msgid "Support Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support description"
msgid "The maximum instantaneous velocity change with which the support structure is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_infill label"
msgid "Support Infill Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_infill description"
msgid "The maximum instantaneous velocity change with which the infill of support is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_interface label"
msgid "Support Interface Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_interface description"
msgid "The maximum instantaneous velocity change with which the roofs and floors of support are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_roof label"
msgid "Support Roof Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_roof description"
msgid "The maximum instantaneous velocity change with which the roofs of support are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_bottom label"
msgid "Support Floor Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_bottom description"
msgid "The maximum instantaneous velocity change with which the floors of support are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_prime_tower label"
msgid "Prime Tower Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_prime_tower description"
msgid "The maximum instantaneous velocity change with which the prime tower is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_travel label"
msgid "Travel Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_travel description"
msgid "The maximum instantaneous velocity change with which travel moves are made."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_layer_0 label"
msgid "Initial Layer Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_layer_0 description"
msgid "The print maximum instantaneous velocity change for the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_print_layer_0 label"
msgid "Initial Layer Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_print_layer_0 description"
msgid "The maximum instantaneous velocity change during the printing of the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_travel_layer_0 label"
msgid "Initial Layer Travel Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_travel_layer_0 description"
msgid "The acceleration for travel moves in the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_skirt_brim label"
msgid "Skirt/Brim Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_skirt_brim description"
msgid "The maximum instantaneous velocity change with which the skirt and brim are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel label"
msgid "Travel"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel description"
msgid "travel"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_enable label"
msgid "Enable Retraction"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_enable description"
msgid "Retract the filament when the nozzle is moving over a non-printed area."
msgstr ""

#: fdmprinter.def.json
msgctxt "retract_at_layer_change label"
msgid "Retract at Layer Change"
msgstr ""

#: fdmprinter.def.json
msgctxt "retract_at_layer_change description"
msgid "Retract the filament when the nozzle is moving to the next layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_amount label"
msgid "Retraction Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_amount description"
msgid "The length of material retracted during a retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_speed label"
msgid "Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_speed description"
msgid "The speed at which the filament is retracted and primed during a retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_retract_speed label"
msgid "Retraction Retract Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_retract_speed description"
msgid "The speed at which the filament is retracted during a retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_prime_speed label"
msgid "Retraction Prime Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_prime_speed description"
msgid "The speed at which the filament is primed during a retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_extra_prime_amount label"
msgid "Retraction Extra Prime Amount"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_extra_prime_amount description"
msgid "Some material can ooze away during a travel move, which can be compensated for here."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_min_travel label"
msgid "Retraction Minimum Travel"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_min_travel description"
msgid "The minimum distance of travel needed for a retraction to happen at all. This helps to get fewer retractions in a small area."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_count_max label"
msgid "Maximum Retraction Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_count_max description"
msgid "This setting limits the number of retractions occurring within the minimum extrusion distance window. Further retractions within this window will be ignored. This avoids retracting repeatedly on the same piece of filament, as that can flatten the filament and cause grinding issues."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_extrusion_window label"
msgid "Minimum Extrusion Distance Window"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_extrusion_window description"
msgid "The window in which the maximum retraction count is enforced. This value should be approximately the same as the retraction distance, so that effectively the number of times a retraction passes the same patch of material is limited."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing label"
msgid "Combing Mode"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing description"
msgid "Combing keeps the nozzle within already printed areas when traveling. This results in slightly longer travel moves but reduces the need for retractions. If combing is off, the material will retract and the nozzle moves in a straight line to the next point. It is also possible to avoid combing over top/bottom skin areas or to only comb within the infill."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing option off"
msgid "Off"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing option all"
msgid "All"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing option no_outer_surfaces"
msgid "Not on Outer Surface"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing option noskin"
msgid "Not in Skin"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing option infill"
msgid "Within Infill"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing_max_distance label"
msgid "Max Comb Distance With No Retract"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_retract_before_outer_wall label"
msgid "Retract Before Outer Wall"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_retract_before_outer_wall description"
msgid "Always retract when moving to start an outer wall."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_other_parts label"
msgid "Avoid Printed Parts When Traveling"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_other_parts description"
msgid "The nozzle avoids already printed parts when traveling. This option is only available when combing is enabled."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_supports label"
msgid "Avoid Supports When Traveling"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_supports description"
msgid "The nozzle avoids already printed supports when traveling. This option is only available when combing is enabled."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_distance label"
msgid "Travel Avoid Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_distance description"
msgid "The distance between the nozzle and already printed parts when avoiding during travel moves."
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_start_x label"
msgid "Layer Start X"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_start_x description"
msgid "The X coordinate of the position near where to find the part to start printing each layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_start_y label"
msgid "Layer Start Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_start_y description"
msgid "The Y coordinate of the position near where to find the part to start printing each layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_enabled label"
msgid "Z Hop When Retracted"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_enabled description"
msgid "Whenever a retraction is done, the build plate is lowered to create clearance between the nozzle and the print. It prevents the nozzle from hitting the print during travel moves, reducing the chance to knock the print from the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_only_when_collides label"
msgid "Z Hop Only Over Printed Parts"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_only_when_collides description"
msgid "Only perform a Z Hop when moving over printed parts which cannot be avoided by horizontal motion by Avoid Printed Parts when Traveling."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop label"
msgid "Z Hop Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop description"
msgid "The height difference when performing a Z Hop."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_after_extruder_switch label"
msgid "Z Hop After Extruder Switch"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_after_extruder_switch description"
msgid "After the machine switched from one extruder to the other, the build plate is lowered to create clearance between the nozzle and the print. This prevents the nozzle from leaving oozed material on the outside of a print."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_after_extruder_switch_height label"
msgid "Z Hop After Extruder Switch Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_after_extruder_switch_height description"
msgid "The height difference when performing a Z Hop after extruder switch."
msgstr ""

#: fdmprinter.def.json
msgctxt "cooling label"
msgid "Cooling"
msgstr ""

#: fdmprinter.def.json
msgctxt "cooling description"
msgid "Cooling"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_enabled label"
msgid "Enable Print Cooling"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_enabled description"
msgid "Enables the print cooling fans while printing. The fans improve print quality on layers with short layer times and bridging / overhangs."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed label"
msgid "Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed description"
msgid "The speed at which the print cooling fans spin."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_min label"
msgid "Regular Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_min description"
msgid "The speed at which the fans spin before hitting the threshold. When a layer prints faster than the threshold, the fan speed gradually inclines towards the maximum fan speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_max label"
msgid "Maximum Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_max description"
msgid "The speed at which the fans spin on the minimum layer time. The fan speed gradually increases between the regular fan speed and maximum fan speed when the threshold is hit."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_layer_time_fan_speed_max label"
msgid "Regular/Maximum Fan Speed Threshold"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_layer_time_fan_speed_max description"
msgid "The layer time which sets the threshold between regular fan speed and maximum fan speed. Layers that print slower than this time use regular fan speed. For faster layers the fan speed gradually increases towards the maximum fan speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_0 label"
msgid "Initial Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_0 description"
msgid "The speed at which the fans spin at the start of the print. In subsequent layers the fan speed is gradually increased up to the layer corresponding to Regular Fan Speed at Height."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_full_at_height label"
msgid "Regular Fan Speed at Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_full_at_height description"
msgid "The height at which the fans spin on regular fan speed. At the layers below the fan speed gradually increases from Initial Fan Speed to Regular Fan Speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_full_layer label"
msgid "Regular Fan Speed at Layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_full_layer description"
msgid "The layer at which the fans spin on regular fan speed. If regular fan speed at height is set, this value is calculated and rounded to a whole number."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_layer_time label"
msgid "Minimum Layer Time"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_layer_time description"
msgid "The minimum time spent in a layer. This forces the printer to slow down, to at least spend the time set here in one layer. This allows the printed material to cool down properly before printing the next layer. Layers may still take shorter than the minimal layer time if Lift Head is disabled and if the Minimum Speed would otherwise be violated."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_speed label"
msgid "Minimum Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_speed description"
msgid "The minimum print speed, despite slowing down due to the minimum layer time. When the printer would slow down too much, the pressure in the nozzle would be too low and result in bad print quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_lift_head label"
msgid "Lift Head"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_lift_head description"
msgid "When the minimum speed is hit because of minimum layer time, lift the head away from the print and wait the extra time until the minimum layer time is reached."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_temperature label"
msgid "Small Layer Printing Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_temperature description"
msgid "Gradually reduce to this temperature when printing at reduced speeds because of minimum layer time."
msgstr ""

#: fdmprinter.def.json
msgctxt "support label"
msgid "Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "support description"
msgid "Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_enable label"
msgid "Generate Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_enable description"
msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_extruder_nr label"
msgid "Support Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_extruder_nr description"
msgid "The extruder train to use for printing the support. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_extruder_nr label"
msgid "Support Infill Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_extruder_nr description"
msgid "The extruder train to use for printing the infill of the support. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_extruder_nr_layer_0 label"
msgid "First Layer Support Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_extruder_nr_layer_0 description"
msgid "The extruder train to use for printing the first layer of support infill. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_extruder_nr label"
msgid "Support Interface Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_extruder_nr description"
msgid "The extruder train to use for printing the roofs and floors of the support. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_extruder_nr label"
msgid "Support Roof Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_extruder_nr description"
msgid "The extruder train to use for printing the roofs of the support. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_extruder_nr label"
msgid "Support Floor Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_extruder_nr description"
msgid "The extruder train to use for printing the floors of the support. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_structure label"
msgid "Support Structure"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_structure description"
msgid "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_structure option normal"
msgid "Normal"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_structure option tree"
msgid "Tree"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_angle label"
msgid "Tree Support Branch Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_angle description"
msgid "The angle of the branches. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_distance label"
msgid "Tree Support Branch Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_distance description"
msgid "How far apart the branches need to be when they touch the model. Making this distance small will cause the tree support to touch the model at more points, causing better overhang but making support harder to remove."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_diameter label"
msgid "Tree Support Branch Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_diameter description"
msgid "The diameter of the thinnest branches of tree support. Thicker branches are more sturdy. Branches towards the base will be thicker than this."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_max_diameter label"
msgid "Tree Support Trunk Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_max_diameter description"
msgid "The diameter of the widest branches of tree support. A thicker trunk is more sturdy; a thinner trunk takes up less space on the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_diameter_angle label"
msgid "Tree Support Branch Diameter Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_diameter_angle description"
msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the tree support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_collision_resolution label"
msgid "Tree Support Collision Resolution"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_collision_resolution description"
msgid "Resolution to compute collisions with to avoid hitting the model. Setting this lower will produce more accurate trees that fail less often, but increases slicing time dramatically."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_type label"
msgid "Support Placement"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_type description"
msgid "Adjusts the placement of the support structures. The placement can be set to touching build plate or everywhere. When set to everywhere the support structures will also be printed on the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_type option buildplate"
msgid "Touching Buildplate"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_type option everywhere"
msgid "Everywhere"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_angle label"
msgid "Support Overhang Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_angle description"
msgid "The minimum angle of overhangs for which support is added. At a value of 0° all overhangs are supported, 90° will not provide any support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern label"
msgid "Support Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern description"
msgid "The pattern of the support structures of the print. The different options available result in sturdy or easy to remove support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option grid"
msgid "Grid"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option triangles"
msgid "Triangles"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option cross"
msgid "Cross"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option gyroid"
msgid "Gyroid"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_wall_count label"
msgid "Support Wall Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_wall_count description"
msgid "The number of walls with which to surround support infill. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_wall_count label"
msgid "Support Interface Wall Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_wall_count description"
msgid "The number of walls with which to surround support interface. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_wall_count label"
msgid "Support Roof Wall Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_wall_count description"
msgid "The number of walls with which to surround support interface roof. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_wall_count label"
msgid "Support Bottom Wall Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_wall_count description"
msgid "The number of walls with which to surround support interface floor. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "zig_zaggify_support label"
msgid "Connect Support Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "zig_zaggify_support description"
msgid "Connect the ends of the support lines together. Enabling this setting can make your support more sturdy and reduce underextrusion, but it will cost more material."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_connect_zigzags label"
msgid "Connect Support ZigZags"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_connect_zigzags description"
msgid "Connect the ZigZags. This will increase the strength of the zig zag support structure."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_rate label"
msgid "Support Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_rate description"
msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_line_distance label"
msgid "Support Line Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_line_distance description"
msgid "Distance between the printed support structure lines. This setting is calculated by the support density."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_initial_layer_line_distance label"
msgid "Initial Layer Support Line Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_initial_layer_line_distance description"
msgid "Distance between the printed initial layer support structure lines. This setting is calculated by the support density."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_angles label"
msgid "Support Infill Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_angles description"
msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angle 0 degrees."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_enable label"
msgid "Enable Support Brim"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_enable description"
msgid "Generate a brim within the support infill regions of the first layer. This brim is printed underneath the support, not around it. Enabling this setting increases the adhesion of support to the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_width label"
msgid "Support Brim Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_width description"
msgid "The width of the brim to print underneath the support. A larger brim enhances adhesion to the build plate, at the cost of some extra material."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_line_count label"
msgid "Support Brim Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_line_count description"
msgid "The number of lines used for the support brim. More brim lines enhance adhesion to the build plate, at the cost of some extra material."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_z_distance label"
msgid "Support Z Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_z_distance description"
msgid "Distance from the top/bottom of the support structure to the print. This gap provides clearance to remove the supports after the model is printed. This value is rounded up to a multiple of the layer height."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_top_distance label"
msgid "Support Top Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_top_distance description"
msgid "Distance from the top of the support to the print."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_distance label"
msgid "Support Bottom Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_distance description"
msgid "Distance from the print to the bottom of the support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_distance label"
msgid "Support X/Y Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_distance description"
msgid "Distance of the support structure from the print in the X/Y directions."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_overrides_z label"
msgid "Support Distance Priority"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_overrides_z description"
msgid "Whether the Support X/Y Distance overrides the Support Z Distance or vice versa. When X/Y overrides Z the X/Y distance can push away the support from the model, influencing the actual Z distance to the overhang. We can disable this by not applying the X/Y distance around overhangs."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_overrides_z option xy_overrides_z"
msgid "X/Y overrides Z"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_overrides_z option z_overrides_xy"
msgid "Z overrides X/Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_distance_overhang label"
msgid "Minimum Support X/Y Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_distance_overhang description"
msgid "Distance of the support structure from the overhang in the X/Y directions."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_height label"
msgid "Support Stair Step Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_height description"
msgid "The height of the steps of the stair-like bottom of support resting on the model. A low value makes the support harder to remove, but too high values can lead to unstable support structures. Set to zero to turn off the stair-like behaviour."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_width label"
msgid "Support Stair Step Maximum Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_width description"
msgid "The maximum width of the steps of the stair-like bottom of support resting on the model. A low value makes the support harder to remove, but too high values can lead to unstable support structures."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_min_slope label"
msgid "Support Stair Step Minimum Slope Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_min_slope description"
msgid "The minimum slope of the area for stair-stepping to take effect. Low values should make support easier to remove on shallower slopes, but really low values may result in some very counter-intuitive results on other parts of the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_join_distance label"
msgid "Support Join Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_join_distance description"
msgid "The maximum distance between support structures in the X/Y directions. When separate structures are closer together than this value, the structures merge into one."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_offset label"
msgid "Support Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_offset description"
msgid "Amount of offset applied to all support polygons in each layer. Positive values can smooth out the support areas and result in more sturdy support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_sparse_thickness label"
msgid "Support Infill Layer Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_sparse_thickness description"
msgid "The thickness per layer of support infill material. This value should always be a multiple of the layer height and is otherwise rounded."
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_support_infill_steps label"
msgid "Gradual Support Infill Steps"
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_support_infill_steps description"
msgid "Number of times to reduce the support infill density by half when getting further below top surfaces. Areas which are closer to top surfaces get a higher density, up to the Support Infill Density."
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_support_infill_step_height label"
msgid "Gradual Support Infill Step Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_support_infill_step_height description"
msgid "The height of support infill of a given density before switching to half the density."
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_support_area label"
msgid "Minimum Support Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_support_area description"
msgid "Minimum area size for support polygons. Polygons which have an area smaller than this value will not be generated."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_enable label"
msgid "Enable Support Interface"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_enable description"
msgid "Generate a dense interface between the model and the support. This will create a skin at the top of the support on which the model is printed and at the bottom of the support, where it rests on the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_enable label"
msgid "Enable Support Roof"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_enable description"
msgid "Generate a dense slab of material between the top of support and the model. This will create a skin between the model and support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_enable label"
msgid "Enable Support Floor"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_enable description"
msgid "Generate a dense slab of material between the bottom of the support and the model. This will create a skin between the model and support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_height label"
msgid "Support Interface Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_height description"
msgid "The thickness of the interface of the support where it touches with the model on the bottom or the top."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_height label"
msgid "Support Roof Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_height description"
msgid "The thickness of the support roofs. This controls the amount of dense layers at the top of the support on which the model rests."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_height label"
msgid "Support Floor Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_height description"
msgid "The thickness of the support floors. This controls the number of dense layers that are printed on top of places of a model on which support rests."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_skip_height label"
msgid "Support Interface Resolution"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_skip_height description"
msgid "When checking where there's model above and below the support, take steps of the given height. Lower values will slice slower, while higher values may cause normal support to be printed in some places where there should have been support interface."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_density label"
msgid "Support Interface Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_density description"
msgid "Adjusts the density of the roofs and floors of the support structure. A higher value results in better overhangs, but the supports are harder to remove."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_density label"
msgid "Support Roof Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_density description"
msgid "The density of the roofs of the support structure. A higher value results in better overhangs, but the supports are harder to remove."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_line_distance label"
msgid "Support Roof Line Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_line_distance description"
msgid "Distance between the printed support roof lines. This setting is calculated by the Support Roof Density, but can be adjusted separately."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_density label"
msgid "Support Floor Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_density description"
msgid "The density of the floors of the support structure. A higher value results in better adhesion of the support on top of the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_line_distance label"
msgid "Support Floor Line Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_line_distance description"
msgid "Distance between the printed support floor lines. This setting is calculated by the Support Floor Density, but can be adjusted separately."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern label"
msgid "Support Interface Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern description"
msgid "The pattern with which the interface of the support with the model is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern option grid"
msgid "Grid"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern option triangles"
msgid "Triangles"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern label"
msgid "Support Roof Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern description"
msgid "The pattern with which the roofs of the support are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern option grid"
msgid "Grid"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern option triangles"
msgid "Triangles"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern label"
msgid "Support Floor Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern description"
msgid "The pattern with which the floors of the support are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern option grid"
msgid "Grid"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern option triangles"
msgid "Triangles"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_interface_area label"
msgid "Minimum Support Interface Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_interface_area description"
msgid "Minimum area size for support interface polygons. Polygons which have an area smaller than this value will be printed as normal support."
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_roof_area label"
msgid "Minimum Support Roof Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_roof_area description"
msgid "Minimum area size for the roofs of the support. Polygons which have an area smaller than this value will be printed as normal support."
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_bottom_area label"
msgid "Minimum Support Floor Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_bottom_area description"
msgid "Minimum area size for the floors of the support. Polygons which have an area smaller than this value will be printed as normal support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_offset label"
msgid "Support Interface Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_offset description"
msgid "Amount of offset applied to the support interface polygons."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_offset label"
msgid "Support Roof Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_offset description"
msgid "Amount of offset applied to the roofs of the support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_offset label"
msgid "Support Floor Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_offset description"
msgid "Amount of offset applied to the floors of the support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_angles label"
msgid "Support Interface Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_angles description"
msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angles (alternates between 45 and 135 degrees if interfaces are quite thick or 90 degrees)."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_angles label"
msgid "Support Roof Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_angles description"
msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angles (alternates between 45 and 135 degrees if interfaces are quite thick or 90 degrees)."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_angles label"
msgid "Support Floor Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_angles description"
msgid "A list of integer line directions to use. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the default angles (alternates between 45 and 135 degrees if interfaces are quite thick or 90 degrees)."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_fan_enable label"
msgid "Fan Speed Override"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_fan_enable description"
msgid "When enabled, the print cooling fan speed is altered for the skin regions immediately above the support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_supported_skin_fan_speed label"
msgid "Supported Skin Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_supported_skin_fan_speed description"
msgid "Percentage fan speed to use when printing the skin regions immediately above the support. Using a high fan speed can make the support easier to remove."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_use_towers label"
msgid "Use Towers"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_use_towers description"
msgid "Use specialized towers to support tiny overhang areas. These towers have a larger diameter than the region they support. Near the overhang the towers' diameter decreases, forming a roof."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_diameter label"
msgid "Tower Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_diameter description"
msgid "The diameter of a special tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_maximum_supported_diameter label"
msgid "Maximum Tower-Supported Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_maximum_supported_diameter description"
msgid "Maximum diameter in the X/Y directions of a small area which is to be supported by a specialized support tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_roof_angle label"
msgid "Tower Roof Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_roof_angle description"
msgid "The angle of a rooftop of a tower. A higher value results in pointed tower roofs, a lower value results in flattened tower roofs."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_mesh_drop_down label"
msgid "Drop Down Support Mesh"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_mesh_drop_down description"
msgid "Make support everywhere below the support mesh, so that there's no overhang in the support mesh."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_meshes_present label"
msgid "Scene Has Support Meshes"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_meshes_present description"
msgid "There are support meshes present in the scene. This setting is controlled by Cura."
msgstr ""

#: fdmprinter.def.json
msgctxt "platform_adhesion label"
msgid "Build Plate Adhesion"
msgstr ""

#: fdmprinter.def.json
msgctxt "platform_adhesion description"
msgid "Adhesion"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_blob_enable label"
msgid "Enable Prime Blob"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_blob_enable description"
msgid "Whether to prime the filament with a blob before printing. Turning this setting on will ensure that the extruder will have material ready at the nozzle before printing. Printing Brim or Skirt can act like priming too, in which case turning this setting off saves some time."
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_x label"
msgid "Extruder Prime X Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_x description"
msgid "The X coordinate of the position where the nozzle primes at the start of printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_y label"
msgid "Extruder Prime Y Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_y description"
msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type label"
msgid "Build Plate Adhesion Type"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type description"
msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type option skirt"
msgid "Skirt"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type option brim"
msgid "Brim"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type option raft"
msgid "Raft"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type option none"
msgid "None"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_extruder_nr label"
msgid "Build Plate Adhesion Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_extruder_nr description"
msgid "The extruder train to use for printing the skirt/brim/raft. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_extruder_nr label"
msgid "Skirt/Brim Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_extruder_nr description"
msgid "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_extruder_nr label"
msgid "Raft Base Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_extruder_nr description"
msgid "The extruder train to use for printing the first layer of the raft. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_extruder_nr label"
msgid "Raft Middle Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_extruder_nr description"
msgid "The extruder train to use for printing the middle layer of the raft. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_extruder_nr label"
msgid "Raft Top Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_extruder_nr description"
msgid "The extruder train to use for printing the top layer(s) of the raft. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_line_count label"
msgid "Skirt Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_line_count description"
msgid "Multiple skirt lines help to prime your extrusion better for small models. Setting this to 0 will disable the skirt."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_height label"
msgid "Skirt Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_height description"
msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_gap label"
msgid "Skirt Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_gap description"
msgid "The horizontal distance between the skirt and the first layer of the print.\nThis is the minimum distance. Multiple skirt lines will extend outwards from this distance."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_minimal_length label"
msgid "Skirt/Brim Minimum Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_minimal_length description"
msgid "The minimum length of the skirt or brim. If this length is not reached by all skirt or brim lines together, more skirt or brim lines will be added until the minimum length is reached. Note: If the line count is set to 0 this is ignored."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_width label"
msgid "Brim Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_width description"
msgid "The distance from the model to the outermost brim line. A larger brim enhances adhesion to the build plate, but also reduces the effective print area."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_line_count label"
msgid "Brim Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_line_count description"
msgid "The number of lines used for a brim. More brim lines enhance adhesion to the build plate, but also reduces the effective print area."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_gap label"
msgid "Brim Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_gap description"
msgid "The horizontal distance between the first brim line and the outline of the first layer of the print. A small gap can make the brim easier to remove while still providing the thermal benefits."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_replaces_support label"
msgid "Brim Replaces Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_replaces_support description"
msgid "Enforce brim to be printed around the model even if that space would otherwise be occupied by support. This replaces some regions of the first layer of support by brim regions."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_outside_only label"
msgid "Brim Only on Outside"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_outside_only description"
msgid "Only print the brim on the outside of the model. This reduces the amount of brim you need to remove afterwards, while it doesn't reduce the bed adhesion that much."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_inside_margin label"
msgid "Brim Inside Avoid Margin"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_inside_margin description"
msgid "A part fully enclosed inside another part can generate an outer brim that touches the inside of the other part. This removes all brim within this distance from internal holes."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_smart_ordering label"
msgid "Smart Brim"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_smart_ordering description"
msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_margin label"
msgid "Raft Extra Margin"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_margin description"
msgid "If the raft is enabled, this is the extra raft area around the model which is also given a raft. Increasing this margin will create a stronger raft while using more material and leaving less area for your print."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_smoothing label"
msgid "Raft Smoothing"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_smoothing description"
msgid "This setting controls how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_airgap label"
msgid "Raft Air Gap"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_airgap description"
msgid "The gap between the final raft layer and the first layer of the model. Only the first layer is raised by this amount to lower the bonding between the raft layer and the model. Makes it easier to peel off the raft."
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_0_z_overlap label"
msgid "Initial Layer Z Overlap"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_0_z_overlap description"
msgid "Make the first and second layer of the model overlap in the Z direction to compensate for the filament lost in the airgap. All models above the first model layer will be shifted down by this amount."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_layers label"
msgid "Raft Top Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_layers description"
msgid "The number of top layers on top of the 2nd raft layer. These are fully filled layers that the model sits on. 2 layers result in a smoother top surface than 1."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_thickness label"
msgid "Raft Top Layer Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_thickness description"
msgid "Layer thickness of the top raft layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_line_width label"
msgid "Raft Top Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_line_width description"
msgid "Width of the lines in the top surface of the raft. These can be thin lines so that the top of the raft becomes smooth."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_line_spacing label"
msgid "Raft Top Spacing"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_line_spacing description"
msgid "The distance between the raft lines for the top raft layers. The spacing should be equal to the line width, so that the surface is solid."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_layers label"
msgid "Raft Middle Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_layers description"
msgid "The number of layers between the base and the surface of the raft. These comprise the main thickness of the raft. Increasing this creates a thicker, sturdier raft."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_thickness label"
msgid "Raft Middle Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_thickness description"
msgid "Layer thickness of the middle raft layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_line_width label"
msgid "Raft Middle Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_line_width description"
msgid "Width of the lines in the middle raft layer. Making the second layer extrude more causes the lines to stick to the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_line_spacing label"
msgid "Raft Middle Spacing"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_line_spacing description"
msgid "The distance between the raft lines for the middle raft layer. The spacing of the middle should be quite wide, while being dense enough to support the top raft layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_thickness label"
msgid "Raft Base Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_thickness description"
msgid "Layer thickness of the base raft layer. This should be a thick layer which sticks firmly to the printer build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_line_width label"
msgid "Raft Base Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_line_width description"
msgid "Width of the lines in the base raft layer. These should be thick lines to assist in build plate adhesion."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_line_spacing label"
msgid "Raft Base Line Spacing"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_line_spacing description"
msgid "The distance between the raft lines for the base raft layer. Wide spacing makes for easy removal of the raft from the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_speed label"
msgid "Raft Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_speed description"
msgid "The speed at which the raft is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_speed label"
msgid "Raft Top Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_speed description"
msgid "The speed at which the top raft layers are printed. These should be printed a bit slower, so that the nozzle can slowly smooth out adjacent surface lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_speed label"
msgid "Raft Middle Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_speed description"
msgid "The speed at which the middle raft layer is printed. This should be printed quite slowly, as the volume of material coming out of the nozzle is quite high."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_speed label"
msgid "Raft Base Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_speed description"
msgid "The speed at which the base raft layer is printed. This should be printed quite slowly, as the volume of material coming out of the nozzle is quite high."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_acceleration label"
msgid "Raft Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_acceleration description"
msgid "The acceleration with which the raft is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_acceleration label"
msgid "Raft Top Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_acceleration description"
msgid "The acceleration with which the top raft layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_acceleration label"
msgid "Raft Middle Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_acceleration description"
msgid "The acceleration with which the middle raft layer is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_acceleration label"
msgid "Raft Base Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_acceleration description"
msgid "The acceleration with which the base raft layer is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_jerk label"
msgid "Raft Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_jerk description"
msgid "The jerk with which the raft is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_jerk label"
msgid "Raft Top Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_jerk description"
msgid "The jerk with which the top raft layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_jerk label"
msgid "Raft Middle Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_jerk description"
msgid "The jerk with which the middle raft layer is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_jerk label"
msgid "Raft Base Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_jerk description"
msgid "The jerk with which the base raft layer is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_fan_speed label"
msgid "Raft Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_fan_speed description"
msgid "The fan speed for the raft."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_fan_speed label"
msgid "Raft Top Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_fan_speed description"
msgid "The fan speed for the top raft layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_fan_speed label"
msgid "Raft Middle Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_fan_speed description"
msgid "The fan speed for the middle raft layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_fan_speed label"
msgid "Raft Base Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_fan_speed description"
msgid "The fan speed for the base raft layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "dual label"
msgid "Dual Extrusion"
msgstr ""

#: fdmprinter.def.json
msgctxt "dual description"
msgid "Settings used for printing with multiple extruders."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_enable label"
msgid "Enable Prime Tower"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_enable description"
msgid "Print a tower next to the print which serves to prime the material after each nozzle switch."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_size label"
msgid "Prime Tower Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_size description"
msgid "The width of the prime tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_min_volume label"
msgid "Prime Tower Minimum Volume"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_min_volume description"
msgid "The minimum volume for each layer of the prime tower in order to purge enough material."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_position_x label"
msgid "Prime Tower X Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_position_x description"
msgid "The x coordinate of the position of the prime tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_position_y label"
msgid "Prime Tower Y Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_position_y description"
msgid "The y coordinate of the position of the prime tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_wipe_enabled label"
msgid "Wipe Inactive Nozzle on Prime Tower"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_wipe_enabled description"
msgid "After printing the prime tower with one nozzle, wipe the oozed material from the other nozzle off on the prime tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_brim_enable label"
msgid "Prime Tower Brim"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_brim_enable description"
msgid "Prime-towers might need the extra adhesion afforded by a brim even if the model doesn't. Presently can't be used with the 'Raft' adhesion-type."
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_enabled label"
msgid "Enable Ooze Shield"
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_enabled description"
msgid "Enable exterior ooze shield. This will create a shell around the model which is likely to wipe a second nozzle if it's at the same height as the first nozzle."
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_angle label"
msgid "Ooze Shield Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_angle description"
msgid "The maximum angle a part in the ooze shield will have. With 0 degrees being vertical, and 90 degrees being horizontal. A smaller angle leads to less failed ooze shields, but more material."
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_dist label"
msgid "Ooze Shield Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_dist description"
msgid "Distance of the ooze shield from the print, in the X/Y directions."
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_amount label"
msgid "Nozzle Switch Retraction Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_amount description"
msgid "The amount of retraction when switching extruders. Set to 0 for no retraction at all. This should generally be the same as the length of the heat zone."
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_speeds label"
msgid "Nozzle Switch Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_speeds description"
msgid "The speed at which the filament is retracted. A higher retraction speed works better, but a very high retraction speed can lead to filament grinding."
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_speed label"
msgid "Nozzle Switch Retract Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_speed description"
msgid "The speed at which the filament is retracted during a nozzle switch retract."
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_prime_speed label"
msgid "Nozzle Switch Prime Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_prime_speed description"
msgid "The speed at which the filament is pushed back after a nozzle switch retraction."
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_extra_prime_amount label"
msgid "Nozzle Switch Extra Prime Amount"
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_extra_prime_amount description"
msgid "Extra material to prime after nozzle switching."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix label"
msgid "Mesh Fixes"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix description"
msgid "Make the meshes more suited for 3D printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_union_all label"
msgid "Union Overlapping Volumes"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_union_all description"
msgid "Ignore the internal geometry arising from overlapping volumes within a mesh and print the volumes as one. This may cause unintended internal cavities to disappear."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_union_all_remove_holes label"
msgid "Remove All Holes"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_union_all_remove_holes description"
msgid "Remove the holes in each layer and keep only the outside shape. This will ignore any invisible internal geometry. However, it also ignores layer holes which can be viewed from above or below."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_extensive_stitching label"
msgid "Extensive Stitching"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_extensive_stitching description"
msgid "Extensive stitching tries to stitch up open holes in the mesh by closing the hole with touching polygons. This option can introduce a lot of processing time."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_keep_open_polygons label"
msgid "Keep Disconnected Faces"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_keep_open_polygons description"
msgid "Normally Cura tries to stitch up small holes in the mesh and remove parts of a layer with big holes. Enabling this option keeps those parts which cannot be stitched. This option should be used as a last resort option when everything else fails to produce proper g-code."
msgstr ""

#: fdmprinter.def.json
msgctxt "multiple_mesh_overlap label"
msgid "Merged Meshes Overlap"
msgstr ""

#: fdmprinter.def.json
msgctxt "multiple_mesh_overlap description"
msgid "Make meshes which are touching each other overlap a bit. This makes them bond together better."
msgstr ""

#: fdmprinter.def.json
msgctxt "carve_multiple_volumes label"
msgid "Remove Mesh Intersection"
msgstr ""

#: fdmprinter.def.json
msgctxt "carve_multiple_volumes description"
msgid "Remove areas where multiple meshes are overlapping with each other. This may be used if merged dual material objects overlap with each other."
msgstr ""

#: fdmprinter.def.json
msgctxt "alternate_carve_order label"
msgid "Alternate Mesh Removal"
msgstr ""

#: fdmprinter.def.json
msgctxt "alternate_carve_order description"
msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
msgstr ""

#: fdmprinter.def.json
msgctxt "remove_empty_first_layers label"
msgid "Remove Empty First Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "remove_empty_first_layers description"
msgid "Remove empty layers beneath the first printed layer if they are present. Disabling this setting can cause empty first layers if the Slicing Tolerance setting is set to Exclusive or Middle."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_resolution label"
msgid "Maximum Resolution"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_resolution description"
msgid "The minimum size of a line segment after slicing. If you increase this, the mesh will have a lower resolution. This may allow the printer to keep up with the speed it has to process g-code and will increase slice speed by removing details of the mesh that it can't process anyway."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_travel_resolution label"
msgid "Maximum Travel Resolution"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_travel_resolution description"
msgid "The minimum size of a travel line segment after slicing. If you increase this, the travel moves will have less smooth corners. This may allow the printer to keep up with the speed it has to process g-code, but it may cause model avoidance to become less accurate."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_deviation label"
msgid "Maximum Deviation"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_deviation description"
msgid "The maximum deviation allowed when reducing the resolution for the Maximum Resolution setting. If you increase this, the print will be less accurate, but the g-code will be smaller. Maximum Deviation is a limit for Maximum Resolution, so if the two conflict the Maximum Deviation will always be held true."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_extrusion_area_deviation label"
msgid "Maximum Extrusion Area Deviation"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_extrusion_area_deviation description"
msgid "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller."
msgstr ""

#: fdmprinter.def.json
msgctxt "blackmagic label"
msgid "Special Modes"
msgstr ""

#: fdmprinter.def.json
msgctxt "blackmagic description"
msgid "Non-traditional ways to print your models."
msgstr ""

#: fdmprinter.def.json
msgctxt "print_sequence label"
msgid "Print Sequence"
msgstr ""

#: fdmprinter.def.json
msgctxt "print_sequence description"
msgid "Whether to print all models one layer at a time or to wait for one model to finish, before moving on to the next. One at a time mode is possible if a) only one extruder is enabled and b) all models are separated in such a way that the whole print head can move in between and all models are lower than the distance between the nozzle and the X/Y axes."
msgstr ""

#: fdmprinter.def.json
msgctxt "print_sequence option all_at_once"
msgid "All at Once"
msgstr ""

#: fdmprinter.def.json
msgctxt "print_sequence option one_at_a_time"
msgid "One at a Time"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_mesh label"
msgid "Infill Mesh"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_mesh description"
msgid "Use this mesh to modify the infill of other meshes with which it overlaps. Replaces infill regions of other meshes with regions for this mesh. It's suggested to only print one Wall and no Top/Bottom Skin for this mesh."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_mesh_order label"
msgid "Mesh Processing Rank"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_mesh_order description"
msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
msgstr ""

#: fdmprinter.def.json
msgctxt "cutting_mesh label"
msgid "Cutting Mesh"
msgstr ""

#: fdmprinter.def.json
msgctxt "cutting_mesh description"
msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder."
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_enabled label"
msgid "Mold"
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_enabled description"
msgid "Print models as a mold, which can be cast in order to get a model which resembles the models on the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_width label"
msgid "Minimal Mold Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_width description"
msgid "The minimal distance between the outside of the mold and the outside of the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_roof_height label"
msgid "Mold Roof Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_roof_height description"
msgid "The height above horizontal parts in your model which to print mold."
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_angle label"
msgid "Mold Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_angle description"
msgid "The angle of overhang of the outer walls created for the mold. 0° will make the outer shell of the mold vertical, while 90° will make the outside of the model follow the contour of the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_mesh label"
msgid "Support Mesh"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_mesh description"
msgid "Use this mesh to specify support areas. This can be used to generate support structure."
msgstr ""

#: fdmprinter.def.json
msgctxt "anti_overhang_mesh label"
msgid "Anti Overhang Mesh"
msgstr ""

#: fdmprinter.def.json
msgctxt "anti_overhang_mesh description"
msgid "Use this mesh to specify where no part of the model should be detected as overhang. This can be used to remove unwanted support structure."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_mesh_surface_mode label"
msgid "Surface Mode"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_mesh_surface_mode description"
msgid "Treat the model as a surface only, a volume, or volumes with loose surfaces. The normal print mode only prints enclosed volumes. \"Surface\" prints a single wall tracing the mesh surface with no infill and no top/bottom skin. \"Both\" prints enclosed volumes like normal and any remaining polygons as surfaces."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_mesh_surface_mode option normal"
msgid "Normal"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_mesh_surface_mode option surface"
msgid "Surface"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_mesh_surface_mode option both"
msgid "Both"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_spiralize label"
msgid "Spiralize Outer Contour"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_spiralize description"
msgid "Spiralize smooths out the Z move of the outer edge. This will create a steady Z increase over the whole print. This feature turns a solid model into a single walled print with a solid bottom. This feature should only be enabled when each layer only contains a single part."
msgstr ""

#: fdmprinter.def.json
msgctxt "smooth_spiralized_contours label"
msgid "Smooth Spiralized Contours"
msgstr ""

#: fdmprinter.def.json
msgctxt "smooth_spiralized_contours description"
msgid "Smooth the spiralized contours to reduce the visibility of the Z seam (the Z seam should be barely visible on the print but will still be visible in the layer view). Note that smoothing will tend to blur fine surface details."
msgstr ""

#: fdmprinter.def.json
msgctxt "relative_extrusion label"
msgid "Relative Extrusion"
msgstr ""

#: fdmprinter.def.json
msgctxt "relative_extrusion description"
msgid "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the g-code. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any g-code script is output."
msgstr ""

#: fdmprinter.def.json
msgctxt "experimental label"
msgid "Experimental"
msgstr ""

#: fdmprinter.def.json
msgctxt "experimental description"
msgid "Features that haven't completely been fleshed out yet."
msgstr ""

#: fdmprinter.def.json
msgctxt "slicing_tolerance label"
msgid "Slicing Tolerance"
msgstr ""

#: fdmprinter.def.json
msgctxt "slicing_tolerance description"
msgid "Vertical tolerance in the sliced layers. The contours of a layer are normally generated by taking cross sections through the middle of each layer's thickness (Middle). Alternatively each layer can have the areas which fall inside of the volume throughout the entire thickness of the layer (Exclusive) or a layer has the areas which fall inside anywhere within the layer (Inclusive). Inclusive retains the most details, Exclusive makes for the best fit and Middle stays closest to the original surface."
msgstr ""

#: fdmprinter.def.json
msgctxt "slicing_tolerance option middle"
msgid "Middle"
msgstr ""

#: fdmprinter.def.json
msgctxt "slicing_tolerance option exclusive"
msgid "Exclusive"
msgstr ""

#: fdmprinter.def.json
msgctxt "slicing_tolerance option inclusive"
msgid "Inclusive"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_enable_travel_optimization label"
msgid "Infill Travel Optimization"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_enable_travel_optimization description"
msgid "When enabled, the order in which the infill lines are printed is optimized to reduce the distance travelled. The reduction in travel time achieved very much depends on the model being sliced, infill pattern, density, etc. Note that, for some models that have many small areas of infill, the time to slice the model may be greatly increased."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow_temp_graph label"
msgid "Flow Temperature Graph"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow_temp_graph description"
msgid "Data linking material flow (in mm3 per second) to temperature (degrees Celsius)."
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_polygon_circumference label"
msgid "Minimum Polygon Circumference"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_polygon_circumference description"
msgid "Polygons in sliced layers that have a circumference smaller than this amount will be filtered out. Lower values lead to higher resolution mesh at the cost of slicing time. It is meant mostly for high resolution SLA printers and very tiny 3D models with a lot of details."
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_enable label"
msgid "Generate Interlocking Structure"
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_enable description"
msgid "At the locations where models touch, generate an interlocking beam structure. This improves the adhesion between models, especially models printed in different materials."
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_beam_width label"
msgid "Interlocking Beam Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_beam_width description"
msgid "The width of the interlocking structure beams."
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_orientation label"
msgid "Interlocking Structure Orientation"
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_orientation description"
msgid "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects."
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_beam_layer_count label"
msgid "Interlocking Beam Layer Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_beam_layer_count description"
msgid "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects."
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_depth label"
msgid "Interlocking Depth"
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_depth description"
msgid "The distance from the boundary between models to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion."
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_boundary_avoidance label"
msgid "Interlocking Boundary Avoidance"
msgstr ""

#: fdmprinter.def.json
msgctxt "interlocking_boundary_avoidance description"
msgid "The distance from the outside of a model where interlocking structures will not be generated, measured in cells."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_skip_some_zags label"
msgid "Break Up Support In Chunks"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_skip_some_zags description"
msgid "Skip some support line connections to make the support structure easier to break away. This setting is applicable to the Zig Zag support infill pattern."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_skip_zag_per_mm label"
msgid "Support Chunk Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_skip_zag_per_mm description"
msgid "Leave out a connection between support lines once every N millimeter to make the support structure easier to break away."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_zag_skip_count label"
msgid "Support Chunk Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_zag_skip_count description"
msgid "Skip one in every N connection lines to make the support structure easier to break away."
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_enabled label"
msgid "Enable Draft Shield"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_enabled description"
msgid "This will create a wall around the model, which traps (hot) air and shields against exterior airflow. Especially useful for materials which warp easily."
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_dist label"
msgid "Draft Shield X/Y Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_dist description"
msgid "Distance of the draft shield from the print, in the X/Y directions."
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height_limitation label"
msgid "Draft Shield Limitation"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height_limitation description"
msgid "Set the height of the draft shield. Choose to print the draft shield at the full height of the model or at a limited height."
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height_limitation option full"
msgid "Full"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height_limitation option limited"
msgid "Limited"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height label"
msgid "Draft Shield Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height description"
msgid "Height limitation of the draft shield. Above this height no draft shield will be printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "conical_overhang_enabled label"
msgid "Make Overhang Printable"
msgstr ""

#: fdmprinter.def.json
msgctxt "conical_overhang_enabled description"
msgid "Change the geometry of the printed model such that minimal support is required. Steep overhangs will become shallow overhangs. Overhanging areas will drop down to become more vertical."
msgstr ""

#: fdmprinter.def.json
msgctxt "conical_overhang_angle label"
msgid "Maximum Model Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "conical_overhang_angle description"
msgid "The maximum angle of overhangs after the they have been made printable. At a value of 0° all overhangs are replaced by a piece of model connected to the build plate, 90° will not change the model in any way."
msgstr ""

#: fdmprinter.def.json
msgctxt "conical_overhang_hole_size label"
msgid "Maximum Overhang Hole Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "conical_overhang_hole_size description"
msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_enable label"
msgid "Enable Coasting"
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_enable description"
msgid "Coasting replaces the last part of an extrusion path with a travel path. The oozed material is used to print the last piece of the extrusion path in order to reduce stringing."
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_volume label"
msgid "Coasting Volume"
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_volume description"
msgid "The volume otherwise oozed. This value should generally be close to the nozzle diameter cubed."
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_min_volume label"
msgid "Minimum Volume Before Coasting"
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_min_volume description"
msgid "The smallest volume an extrusion path should have before allowing coasting. For smaller extrusion paths, less pressure has been built up in the bowden tube and so the coasted volume is scaled linearly. This value should always be larger than the Coasting Volume."
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_speed label"
msgid "Coasting Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_speed description"
msgid "The speed by which to move during coasting, relative to the speed of the extrusion path. A value slightly under 100% is advised, since during the coasting move the pressure in the bowden tube drops."
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_infill_pocket_size label"
msgid "Cross 3D Pocket Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_infill_pocket_size description"
msgid "The size of pockets at four-way crossings in the cross 3D pattern at heights where the pattern is touching itself."
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_infill_density_image label"
msgid "Cross Infill Density Image"
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_infill_density_image description"
msgid "The file location of an image of which the brightness values determine the minimal density at the corresponding location in the infill of the print."
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_support_density_image label"
msgid "Cross Fill Density Image for Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_support_density_image description"
msgid "The file location of an image of which the brightness values determine the minimal density at the corresponding location in the support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_enabled label"
msgid "Enable Conical Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_enabled description"
msgid "Make support areas smaller at the bottom than at the overhang."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_angle label"
msgid "Conical Support Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_angle description"
msgid "The angle of the tilt of conical support. With 0 degrees being vertical, and 90 degrees being horizontal. Smaller angles cause the support to be more sturdy, but consist of more material. Negative angles cause the base of the support to be wider than the top."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_min_width label"
msgid "Conical Support Minimum Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_min_width description"
msgid "Minimum width to which the base of the conical support area is reduced. Small widths can lead to unstable support structures."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_enabled label"
msgid "Fuzzy Skin"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_enabled description"
msgid "Randomly jitter while printing the outer wall, so that the surface has a rough and fuzzy look."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_outside_only label"
msgid "Fuzzy Skin Outside Only"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_outside_only description"
msgid "Jitter only the parts' outlines and not the parts' holes."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_thickness label"
msgid "Fuzzy Skin Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_thickness description"
msgid "The width within which to jitter. It's advised to keep this below the outer wall width, since the inner walls are unaltered."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_point_density label"
msgid "Fuzzy Skin Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_point_density description"
msgid "The average density of points introduced on each polygon in a layer. Note that the original points of the polygon are discarded, so a low density results in a reduction of the resolution."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_point_dist label"
msgid "Fuzzy Skin Point Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_point_dist description"
msgid "The average distance between the random points introduced on each line segment. Note that the original points of the polygon are discarded, so a high smoothness results in a reduction of the resolution. This value must be higher than half the Fuzzy Skin Thickness."
msgstr ""

#: fdmprinter.def.json
msgctxt "flow_rate_max_extrusion_offset label"
msgid "Flow Rate Compensation Max Extrusion Offset"
msgstr ""

#: fdmprinter.def.json
msgctxt "flow_rate_max_extrusion_offset description"
msgid "The maximum distance in mm to move the filament to compensate for changes in flow rate."
msgstr ""

#: fdmprinter.def.json
msgctxt "flow_rate_extrusion_offset_factor label"
msgid "Flow Rate Compensation Factor"
msgstr ""

#: fdmprinter.def.json
msgctxt "flow_rate_extrusion_offset_factor description"
msgid "How far to move the filament in order to compensate for changes in flow rate, as a percentage of how far the filament would move in one second of extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_enabled label"
msgid "Wire Printing"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_enabled description"
msgid "Print only the outside surface with a sparse webbed structure, printing 'in thin air'. This is realized by horizontally printing the contours of the model at given Z intervals which are connected via upward and diagonally downward lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_height label"
msgid "WP Connection Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_height description"
msgid "The height of the upward and diagonally downward lines between two horizontal parts. This determines the overall density of the net structure. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_inset label"
msgid "WP Roof Inset Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_inset description"
msgid "The distance covered when making a connection from a roof outline inward. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed label"
msgid "WP Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed description"
msgid "Speed at which the nozzle moves when extruding material. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_bottom label"
msgid "WP Bottom Printing Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_bottom description"
msgid "Speed of printing the first layer, which is the only layer touching the build platform. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_up label"
msgid "WP Upward Printing Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_up description"
msgid "Speed of printing a line upward 'in thin air'. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_down label"
msgid "WP Downward Printing Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_down description"
msgid "Speed of printing a line diagonally downward. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_flat label"
msgid "WP Horizontal Printing Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_flat description"
msgid "Speed of printing the horizontal contours of the model. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow label"
msgid "WP Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow description"
msgid "Flow compensation: the amount of material extruded is multiplied by this value. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow_connection label"
msgid "WP Connection Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow_connection description"
msgid "Flow compensation when going up or down. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow_flat label"
msgid "WP Flat Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow_flat description"
msgid "Flow compensation when printing flat lines. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_top_delay label"
msgid "WP Top Delay"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_top_delay description"
msgid "Delay time after an upward move, so that the upward line can harden. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_bottom_delay label"
msgid "WP Bottom Delay"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_bottom_delay description"
msgid "Delay time after a downward move. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flat_delay label"
msgid "WP Flat Delay"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flat_delay description"
msgid "Delay time between two horizontal segments. Introducing such a delay can cause better adhesion to previous layers at the connection points, while too long delays cause sagging. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_up_half_speed label"
msgid "WP Ease Upward"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_up_half_speed description"
msgid "Distance of an upward move which is extruded with half speed.\nThis can cause better adhesion to previous layers, while not heating the material in those layers too much. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_top_jump label"
msgid "WP Knot Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_top_jump description"
msgid "Creates a small knot at the top of an upward line, so that the consecutive horizontal layer has a better chance to connect to it. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_fall_down label"
msgid "WP Fall Down"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_fall_down description"
msgid "Distance with which the material falls down after an upward extrusion. This distance is compensated for. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_drag_along label"
msgid "WP Drag Along"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_drag_along description"
msgid "Distance with which the material of an upward extrusion is dragged along with the diagonally downward extrusion. This distance is compensated for. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_strategy label"
msgid "WP Strategy"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_strategy description"
msgid "Strategy for making sure two consecutive layers connect at each connection point. Retraction lets the upward lines harden in the right position, but may cause filament grinding. A knot can be made at the end of an upward line to heighten the chance of connecting to it and to let the line cool; however, it may require slow printing speeds. Another strategy is to compensate for the sagging of the top of an upward line; however, the lines won't always fall down as predicted."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_strategy option compensate"
msgid "Compensate"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_strategy option knot"
msgid "Knot"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_strategy option retract"
msgid "Retract"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_straight_before_down label"
msgid "WP Straighten Downward Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_straight_before_down description"
msgid "Percentage of a diagonally downward line which is covered by a horizontal line piece. This can prevent sagging of the top most point of upward lines. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_fall_down label"
msgid "WP Roof Fall Down"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_fall_down description"
msgid "The distance which horizontal roof lines printed 'in thin air' fall down when being printed. This distance is compensated for. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_drag_along label"
msgid "WP Roof Drag Along"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_drag_along description"
msgid "The distance of the end piece of an inward line which gets dragged along when going back to the outer outline of the roof. This distance is compensated for. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_outer_delay label"
msgid "WP Roof Outer Delay"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_outer_delay description"
msgid "Time spent at the outer perimeters of hole which is to become a roof. Longer times can ensure a better connection. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_nozzle_clearance label"
msgid "WP Nozzle Clearance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_nozzle_clearance description"
msgid "Distance between the nozzle and horizontally downward lines. Larger clearance results in diagonally downward lines with a less steep angle, which in turn results in less upward connections with the next layer. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_enabled label"
msgid "Use Adaptive Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_enabled description"
msgid "Adaptive layers computes the layer heights depending on the shape of the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_variation label"
msgid "Adaptive Layers Maximum Variation"
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_variation description"
msgid "The maximum allowed height different from the base layer height."
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_variation_step label"
msgid "Adaptive Layers Variation Step Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_variation_step description"
msgid "The difference in height of the next layer height compared to the previous one."
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_threshold label"
msgid "Adaptive Layers Topography Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_threshold description"
msgid "Target horizontal distance between two adjacent layers. Reducing this setting causes thinner layers to be used to bring the edges of the layers closer together."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_overhang_angle label"
msgid "Overhanging Wall Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_overhang_angle description"
msgid "Walls that overhang more than this angle will be printed using overhanging wall settings. When the value is 90, no walls will be treated as overhanging. Overhang that gets supported by support will not be treated as overhang either."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_overhang_speed_factor label"
msgid "Overhanging Wall Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_overhang_speed_factor description"
msgid "Overhanging walls will be printed at this percentage of their normal print speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_settings_enabled label"
msgid "Enable Bridge Settings"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_settings_enabled description"
msgid "Detect bridges and modify print speed, flow and fan settings while bridges are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_min_length label"
msgid "Minimum Bridge Wall Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_min_length description"
msgid "Unsupported walls shorter than this will be printed using the normal wall settings. Longer unsupported walls will be printed using the bridge wall settings."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_support_threshold label"
msgid "Bridge Skin Support Threshold"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_support_threshold description"
msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_sparse_infill_max_density label"
msgid "Bridge Sparse Infill Max Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_sparse_infill_max_density description"
msgid "Maximum density of infill considered to be sparse. Skin over sparse infill is considered to be unsupported and so may be treated as a bridge skin."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_coast label"
msgid "Bridge Wall Coasting"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_coast description"
msgid "This controls the distance the extruder should coast immediately before a bridge wall begins. Coasting before the bridge starts can reduce the pressure in the nozzle and may produce a flatter bridge."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_speed label"
msgid "Bridge Wall Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_speed description"
msgid "The speed at which the bridge walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_material_flow label"
msgid "Bridge Wall Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_material_flow description"
msgid "When printing bridge walls, the amount of material extruded is multiplied by this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed label"
msgid "Bridge Skin Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed description"
msgid "The speed at which bridge skin regions are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow label"
msgid "Bridge Skin Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density label"
msgid "Bridge Skin Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density description"
msgid "The density of the bridge skin layer. Values less than 100 will increase the gaps between the skin lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed label"
msgid "Bridge Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed description"
msgid "Percentage fan speed to use when printing bridge walls and skin."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_enable_more_layers label"
msgid "Bridge Has Multiple Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_enable_more_layers description"
msgid "If enabled, the second and third layers above the air are printed using the following settings. Otherwise, those layers are printed using the normal settings."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed_2 label"
msgid "Bridge Second Skin Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed_2 description"
msgid "Print speed to use when printing the second bridge skin layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow_2 label"
msgid "Bridge Second Skin Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow_2 description"
msgid "When printing the second bridge skin layer, the amount of material extruded is multiplied by this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density_2 label"
msgid "Bridge Second Skin Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density_2 description"
msgid "The density of the second bridge skin layer. Values less than 100 will increase the gaps between the skin lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed_2 label"
msgid "Bridge Second Skin Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed_2 description"
msgid "Percentage fan speed to use when printing the second bridge skin layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed_3 label"
msgid "Bridge Third Skin Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed_3 description"
msgid "Print speed to use when printing the third bridge skin layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow_3 label"
msgid "Bridge Third Skin Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow_3 description"
msgid "When printing the third bridge skin layer, the amount of material extruded is multiplied by this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density_3 label"
msgid "Bridge Third Skin Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density_3 description"
msgid "The density of the third bridge skin layer. Values less than 100 will increase the gaps between the skin lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed_3 label"
msgid "Bridge Third Skin Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed_3 description"
msgid "Percentage fan speed to use when printing the third bridge skin layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "clean_between_layers label"
msgid "Wipe Nozzle Between Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "clean_between_layers description"
msgid "Whether to include nozzle wipe G-Code between layers (maximum 1 per layer). Enabling this setting could influence behavior of retract at layer change. Please use Wipe Retraction settings to control retraction at layers where the wipe script will be working."
msgstr ""

#: fdmprinter.def.json
msgctxt "max_extrusion_before_wipe label"
msgid "Material Volume Between Wipes"
msgstr ""

#: fdmprinter.def.json
msgctxt "max_extrusion_before_wipe description"
msgid "Maximum material that can be extruded before another nozzle wipe is initiated. If this value is less than the volume of material required in a layer, the setting has no effect in this layer, i.e. it is limited to one wipe per layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_enable label"
msgid "Wipe Retraction Enable"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_enable description"
msgid "Retract the filament when the nozzle is moving over a non-printed area."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_amount label"
msgid "Wipe Retraction Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_amount description"
msgid "Amount to retract the filament so it does not ooze during the wipe sequence."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_extra_prime_amount label"
msgid "Wipe Retraction Extra Prime Amount"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_extra_prime_amount description"
msgid "Some material can ooze away during a wipe travel moves, which can be compensated for here."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_speed label"
msgid "Wipe Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_speed description"
msgid "The speed at which the filament is retracted and primed during a wipe retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_retract_speed label"
msgid "Wipe Retraction Retract Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_retract_speed description"
msgid "The speed at which the filament is retracted during a wipe retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_prime_speed label"
msgid "Wipe Retraction Prime Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_prime_speed description"
msgid "The speed at which the filament is primed during a wipe retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_pause label"
msgid "Wipe Pause"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_pause description"
msgid "Pause after the unretract."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_enable label"
msgid "Wipe Z Hop"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_enable description"
msgid "When wiping, the build plate is lowered to create clearance between the nozzle and the print. It prevents the nozzle from hitting the print during travel moves, reducing the chance to knock the print from the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_amount label"
msgid "Wipe Z Hop Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_amount description"
msgid "The height difference when performing a Z Hop."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_speed label"
msgid "Wipe Hop Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_speed description"
msgid "Speed to move the z-axis during the hop."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_brush_pos_x label"
msgid "Wipe Brush X Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_brush_pos_x description"
msgid "X location where wipe script will start."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_repeat_count label"
msgid "Wipe Repeat Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_repeat_count description"
msgid "Number of times to move the nozzle across the brush."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_move_distance label"
msgid "Wipe Move Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_move_distance description"
msgid "The distance to move the head back and forth across the brush."
msgstr ""

#: fdmprinter.def.json
msgctxt "small_hole_max_size label"
msgid "Small Hole Max Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_max_length label"
msgid "Small Feature Max Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_max_length description"
msgid "Feature outlines that are shorter than this length will be printed using Small Feature Speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_speed_factor label"
msgid "Small Feature Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_speed_factor description"
msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_speed_factor_0 label"
msgid "Small Feature Initial Layer Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_speed_factor_0 description"
msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_alternate_walls label"
msgid "Alternate Wall Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_alternate_walls description"
msgid "Alternate wall directions every other layer and inset. Useful for materials that can build up stress, like for metal printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_remove_inside_corners label"
msgid "Remove Raft Inside Corners"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_remove_inside_corners description"
msgid "Remove inside corners from the raft, causing the raft to become convex."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_wall_count label"
msgid "Raft Base Wall Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_wall_count description"
msgid "The number of contours to print around the linear pattern in the base layer of the raft."
msgstr ""

#: fdmprinter.def.json
msgctxt "command_line_settings label"
msgid "Command Line Settings"
msgstr ""

#: fdmprinter.def.json
msgctxt "command_line_settings description"
msgid "Settings which are only used if CuraEngine isn't called from the Cura frontend."
msgstr ""

#: fdmprinter.def.json
msgctxt "center_object label"
msgid "Center Object"
msgstr ""

#: fdmprinter.def.json
msgctxt "center_object description"
msgid "Whether to center the object on the middle of the build platform (0,0), instead of using the coordinate system in which the object was saved."
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_x label"
msgid "Mesh Position X"
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_x description"
msgid "Offset applied to the object in the x direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_y label"
msgid "Mesh Position Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_y description"
msgid "Offset applied to the object in the y direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_z label"
msgid "Mesh Position Z"
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_z description"
msgid "Offset applied to the object in the z direction. With this you can perform what was used to be called 'Object Sink'."
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_rotation_matrix label"
msgid "Mesh Rotation Matrix"
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_rotation_matrix description"
msgid "Transformation matrix to be applied to the model when loading it from file."
msgstr ""