um_s3_aa0.8_TPU_Draft_Print.inst.cfg 1.5 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849
  1. [general]
  2. version = 4
  3. name = Fast
  4. definition = ultimaker_s3
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = draft
  9. weight = -2
  10. material = generic_tpu
  11. variant = AA 0.8
  12. [values]
  13. brim_width = 8.75
  14. cool_min_layer_time_fan_speed_max = 6
  15. top_skin_expand_distance = =line_width * 2
  16. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
  17. machine_nozzle_cool_down_speed = 0.5
  18. machine_nozzle_heat_up_speed = 2.5
  19. material_final_print_temperature = =material_print_temperature
  20. material_flow = 105
  21. material_initial_print_temperature = =material_print_temperature
  22. material_print_temperature = =default_material_print_temperature - 2
  23. material_print_temperature_layer_0 = =material_print_temperature + 19
  24. material_standby_temperature = 100
  25. multiple_mesh_overlap = 0.2
  26. prime_tower_enable = True
  27. prime_tower_flow = 100
  28. retract_at_layer_change = False
  29. retraction_count_max = 12
  30. retraction_extra_prime_amount = 0.5
  31. retraction_hop = 1.5
  32. retraction_hop_only_when_collides = False
  33. retraction_min_travel = =line_width * 2
  34. retraction_prime_speed = 15
  35. speed_print = 30
  36. speed_topbottom = =math.ceil(speed_print * 25 / 30)
  37. speed_wall = =math.ceil(speed_print * 30 / 30)
  38. speed_wall_x = =math.ceil(speed_wall * 30 / 30)
  39. support_angle = 50
  40. support_bottom_distance = =support_z_distance
  41. support_offset = =line_width
  42. switch_extruder_prime_speed = 15
  43. switch_extruder_retraction_amount = 20
  44. switch_extruder_retraction_speeds = 45
  45. top_bottom_thickness = 1.2
  46. travel_avoid_distance = 1.5
  47. wall_0_wipe_dist = =line_width * 2