um_s3_aa0.4_TPU_Draft_Print.inst.cfg 1.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657
  1. [general]
  2. version = 4
  3. name = Fast
  4. definition = ultimaker_s3
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = draft
  9. weight = -2
  10. material = generic_tpu
  11. variant = AA 0.4
  12. [values]
  13. brim_width = 8.75
  14. cool_fan_speed_max = 100
  15. cool_min_layer_time_fan_speed_max = 6
  16. cool_min_speed = 4
  17. gradual_infill_step_height = =5 * layer_height
  18. infill_overlap = 0
  19. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
  20. infill_sparse_density = 10
  21. infill_wipe_dist = 0.1
  22. jerk_enabled = True
  23. jerk_print = 25
  24. machine_min_cool_heat_time_window = 15
  25. machine_nozzle_cool_down_speed = 0.5
  26. machine_nozzle_heat_up_speed = 2.5
  27. material_final_print_temperature = =material_print_temperature
  28. material_flow = 106
  29. material_initial_print_temperature = =material_print_temperature
  30. material_print_temperature = =default_material_print_temperature + 2
  31. material_print_temperature_layer_0 = =material_print_temperature + 15
  32. material_standby_temperature = 100
  33. multiple_mesh_overlap = 0
  34. prime_tower_wipe_enabled = True
  35. retraction_count_max = 12
  36. retraction_extra_prime_amount = 0.8
  37. retraction_extrusion_window = 1
  38. retraction_hop_only_when_collides = True
  39. retraction_min_travel = =line_width * 2
  40. skin_line_width = =round(line_width / 0.8, 2)
  41. skin_overlap = 5
  42. speed_layer_0 = =math.ceil(speed_print * 18 / 25)
  43. speed_print = 25
  44. speed_topbottom = =math.ceil(speed_print * 0.8)
  45. speed_wall = =math.ceil(speed_print * 25 / 25)
  46. speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
  47. support_angle = 50
  48. switch_extruder_prime_speed = 15
  49. switch_extruder_retraction_amount = 20
  50. switch_extruder_retraction_speeds = 35
  51. top_bottom_thickness = 0.7
  52. travel_avoid_distance = 1.5
  53. wall_0_inset = 0