printrbot_play.def.json 2.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051
  1. {
  2. "version": 2,
  3. "name": "Printrbot Play",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Chris Pearson",
  8. "manufacturer": "Printrbot",
  9. "file_formats": "text/x-gcode",
  10. "platform": "printrbot_play.3mf",
  11. "machine_extruder_trains":
  12. {
  13. "0": "printrbot_play_extruder_0"
  14. }
  15. },
  16. "overrides": {
  17. "machine_name": { "default_value": "Printrbot Play" },
  18. "machine_heated_bed": { "default_value": false },
  19. "machine_width": { "default_value": 100 },
  20. "machine_depth": { "default_value": 100 },
  21. "machine_height": { "default_value": 130 },
  22. "machine_center_is_zero": { "default_value": false },
  23. "layer_height": { "default_value": 0.2 },
  24. "layer_height_0": { "default_value": 0.3 },
  25. "retraction_amount": { "default_value": 0.7 },
  26. "retraction_speed": { "default_value": 45},
  27. "adhesion_type": { "default_value": "skirt" },
  28. "machine_head_with_fans_polygon": { "default_value": [[-32,999],[37,999],[37,-32],[-32,-32]] },
  29. "gantry_height": { "value": "55" },
  30. "speed_print": { "default_value": 50 },
  31. "machine_max_feedrate_x": {"default_value": 125},
  32. "machine_max_feedrate_y": {"default_value": 125},
  33. "machine_max_feedrate_z": { "default_value": 5 },
  34. "machine_max_acceleration_x": { "default_value": 2000 },
  35. "machine_max_acceleration_y": { "default_value": 2000 },
  36. "machine_max_acceleration_z": { "default_value": 30 },
  37. "machine_max_acceleration_e": { "default_value": 10000 },
  38. "machine_max_jerk_xy": { "default_value": 20 },
  39. "machine_max_jerk_z": { "default_value": 0.4 },
  40. "machine_max_jerk_e": { "default_value": 5.0 },
  41. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  42. "machine_start_gcode": {
  43. "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM106 ;start with the fan on for filament cooling\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29 ;run auto bed leveling\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
  44. },
  45. "machine_end_gcode": {
  46. "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
  47. },
  48. "speed_z_hop": {"default_value": 5}
  49. }
  50. }