julia.def.json 2.9 KB

1234567891011121314151617181920212223242526272829303132333435363738394041
  1. {
  2. "name": "Julia",
  3. "version": 2,
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "manufacturer": "Fracktal",
  8. "file_formats": "text/x-gcode",
  9. "platform_offset": [ 0, 0, 0],
  10. "machine_extruder_trains":
  11. {
  12. "0": "julia_extruder_0"
  13. }
  14. },
  15. "overrides": {
  16. "machine_start_gcode": {
  17. "default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n ;metric values\n M107\n G28\n G29\n G90 ;absolute positioning\n G92 E0; reset extruder distance\n G1 Z5 F300 ;move nozzle up 5mm for safe homing\n G1 X0 Y0 Z0 F5000; move nozzle to home\n M300 S600P200\n M300 S800 P200\n M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n M109 S{material_print_temperature} ;Uncomment to add your own temperature line\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E3 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel}\n ;Put printing message on LCD screen\n M117 Printing...\n"
  18. },
  19. "machine_end_gcode": {
  20. "default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
  21. },
  22. "layer_height": { "default_value": 0.2 },
  23. "support_angle": { "default_value": 30 },
  24. "layer_height_0": { "default_value": 0.2 },
  25. "speed_print": { "default_value": 80 },
  26. "prime_tower_size": { "default_value": 8.660254037844387 },
  27. "retraction_amount": { "default_value": 3 },
  28. "support_pattern": { "default_value": "grid" },
  29. "infill_sparse_density": { "default_value": 10 },
  30. "machine_extruder_count": { "default_value": 1 },
  31. "retraction_combing": { "value": "'off'" },
  32. "machine_heated_bed": { "default_value": true },
  33. "machine_center_is_zero": { "default_value": false },
  34. "machine_height": { "default_value": 260 },
  35. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  36. "machine_depth": { "default_value": 250 },
  37. "machine_width": { "default_value": 210 },
  38. "machine_name": { "default_value": "Julia V2" }
  39. }
  40. }