| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051 |
- {
- "name": "Biqu BX",
- "version": 2,
- "inherits": "biqu_base",
- "metadata": {
- "quality_definition": "biqu_base",
- "visible": true,
- "has_machine_materials": true,
- "platform": "BIQU_BX_PLATE.stl",
- "platform_offset": [
- 7,
- -7.4,
- -3
- ]
- },
- "overrides": {
- "coasting_enable": { "value": false },
- "retraction_amount": { "value": 1 },
- "retraction_speed": { "value": 40 },
- "retraction_extrusion_window": { "value": 1 },
- "retract_at_layer_change": { "value": true },
- "support_enable": { "value": false },
- "support_structure": { "value": "'normal'" },
- "support_type": { "value": "'buildplate'" },
- "support_angle": { "value": 45 },
- "support_infill_rate": { "value": 15 },
- "infill_overlap": { "value": 15.0 },
- "skin_overlap": { "value": 20.0 },
- "fill_outline_gaps": { "value": true },
- "filter_out_tiny_gaps": { "value": true },
- "roofing_layer_count": { "value": 2 },
- "xy_offset_layer_0": { "value": -0.1 },
- "speed_print": { "value": 50 },
- "machine_name": { "default_value": "Biqu BX" },
- "machine_width": { "value": 250 },
- "machine_depth": { "value": 250 },
- "machine_height": { "value": 250 },
- "machine_head_with_fans_polygon": { "default_value": [
- [-33, 35],
- [-33, -23],
- [33, -23],
- [33, 35]
- ]
- },
- "machine_start_gcode": {
- "default_value": "; BIQU BX Start G-code\r\n; For information on how to tune this profile and get the\r\n; most out of your BX visit: https:\/\/github.com\/looxonline\/Marlin\r\n; For the official github site visit: https:\/\/github.com\/bigtreetech\/BIQU-BX\r\n\r\nM117 Initial homing sequence. ; Home so that the probe is positioned to heat\r\nG28\r\n\r\nM117 Probe heating position\r\nG0 X65 Y5 Z1 ; Move the probe to the heating position.\r\n\r\nM117 Getting the heaters up to temp!\r\nM104 S140 ; Set Extruder temperature, no wait\r\nM140 S60 ; Set Heat Bed temperature\r\nM190 S60 ; Wait for Heat Bed temperature\r\n\r\nM117 Waiting for probe to warm! ; Wait another 90s for the probe to absorb heat.\r\nG4 S90 \r\n\r\nM117 Post warming re-home\r\nG28 ; Home all axes again after warming\r\n\r\nM117 Z-Dance of my people\r\nG34\r\n\r\nM117 ABL Probing\r\nG29\r\n\r\nM900 K0 L0 T0 ;Edit the K and L values if you have calibrated a k factor for your filament\r\nM900 T0 S0\r\n\r\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\r\nG1 X4.1 Y10 Z0.3 F5000.0 ; Move to start position\r\n\r\nM117 Getting the extruder up to temp\r\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\r\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\r\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\r\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\r\n\r\nG92 E0 ; Reset Extruder\r\nM117 Purging\r\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\r\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\r\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\r\nG92 E0 ; Reset Extruder\r\nM117 Lets make\r\nG1 X8 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"
- },
- "gantry_height": { "value": 27.5 }
- }
- }
|
