Cura/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg

[general]
version = 4
name = Fine
definition = liquid

[metadata]
setting_version = 17
type = quality
quality_type = normal
weight = 0
material = generic_abs
variant = VO 0.4

[values]
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_print_temperature = =default_material_print_temperature + 10
material_initial_print_temperature = =material_print_temperature - 15
material_final_print_temperature = =material_print_temperature - 20
prime_tower_enable = False
speed_print = 55
speed_layer_0 = =math.ceil(speed_print * 20 / 55)
speed_topbottom = =math.ceil(speed_print * 30 / 55)
speed_wall = =math.ceil(speed_print * 30 / 55)

infill_line_width = =round(line_width * 0.4 / 0.35, 2)
speed_infill = =math.ceil(speed_print * 40 / 55)