cartesio_0.8_petg_normal.inst.cfg 1.5 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556
  1. [general]
  2. version = 4
  3. name = Normal
  4. definition = cartesio
  5. [metadata]
  6. setting_version = 17
  7. type = quality
  8. quality_type = normal
  9. weight = 0
  10. material = generic_petg
  11. variant = 0.8mm thermoplastic extruder
  12. [values]
  13. infill_line_width = 0.9
  14. wall_thickness = 2.4
  15. top_bottom_thickness = 0.8
  16. wall_0_inset = -0.05
  17. fill_perimeter_gaps = nowhere
  18. travel_compensate_overlapping_walls_enabled =
  19. infill_sparse_density = 40
  20. infill_pattern = grid
  21. material_print_temperature_layer_0 = =material_print_temperature + 5
  22. material_initial_print_temperature = =material_print_temperature_layer_0 + 5
  23. material_final_print_temperature = =material_print_temperature
  24. retraction_min_travel = =round(line_width * 10)
  25. retraction_prime_speed = 8
  26. switch_extruder_retraction_amount = 2
  27. switch_extruder_retraction_speeds = =retraction_speed
  28. switch_extruder_prime_speed = =retraction_prime_speed
  29. speed_print = 50
  30. speed_infill = =speed_print
  31. speed_layer_0 = =round(speed_print / 5 * 4)
  32. speed_wall = =round(speed_print / 2)
  33. speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
  34. speed_topbottom = =round(speed_print / 5 * 4)
  35. speed_travel = =round(speed_print if magic_spiralize else 150)
  36. speed_travel_layer_0 = =speed_travel
  37. speed_support_interface = =speed_topbottom
  38. retraction_hop_enabled = True
  39. retraction_hop = 1
  40. cool_min_layer_time_fan_speed_max = =cool_min_layer_time
  41. cool_min_layer_time = 20
  42. skirt_brim_minimal_length = 50
  43. coasting_enable = True
  44. coasting_volume = 0.1
  45. coasting_min_volume = 0.17
  46. coasting_speed = 90