Cura/resources/definitions/ultimaker_method_base.def.json

{
    "version": 2,
    "name": "UltiMaker Method Base Profile",
    "inherits": "ultimaker",
    "metadata":
    {
        "visible": false,
        "author": "UltiMaker",
        "manufacturer": "Ultimaker B.V.",
        "file_formats": "application/x-makerbot",
        "platform": "ultimaker_method_platform.stl",
        "exclude_materials": [],
        "has_machine_materials": true,
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains":
        {
            "0": "ultimaker_method_extruder_left",
            "1": "ultimaker_method_extruder_right"
        },
        "nozzle_offsetting_for_disallowed_areas": false,
        "preferred_material": "ultimaker_pla_175",
        "preferred_quality_type": "fast",
        "preferred_variant_name": "1A",
        "supports_network_connection": true,
        "supports_usb_connection": false,
        "variants_name": "Extruder",
        "variants_name_has_translation": true,
        "weight": -1
    },
    "overrides":
    {
        "acceleration_enabled":
        {
            "enabled": false,
            "value": true
        },
        "acceleration_infill":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_layer_0":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_prime_tower":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_print":
        {
            "enabled": false,
            "value": 800
        },
        "acceleration_print_layer_0":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_roofing":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_support":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_support_bottom":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_support_infill":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_support_interface":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_support_roof":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_topbottom":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_travel":
        {
            "enabled": false,
            "value": 5000
        },
        "acceleration_travel_enabled":
        {
            "enabled": false,
            "value": true
        },
        "acceleration_travel_layer_0":
        {
            "enabled": false,
            "value": "acceleration_travel"
        },
        "acceleration_wall":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_wall_0":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_wall_0_roofing":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_wall_x":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "acceleration_wall_x_roofing":
        {
            "enabled": false,
            "value": "acceleration_print"
        },
        "adhesion_extruder_nr":
        {
            "enabled": false,
            "value": "min(extruderValues('extruder_nr'))"
        },
        "adhesion_type": { "value": "'raft'" },
        "bottom_thickness":
        {
            "minimum_value_warning": 0.3,
            "value": "top_bottom_thickness"
        },
        "bridge_enable_more_layers": { "value": true },
        "bridge_fan_speed_2": { "value": "(cool_fan_speed_max + cool_fan_speed_min) / 2" },
        "bridge_skin_density": { "value": 100 },
        "bridge_skin_density_2": { "value": 100 },
        "bridge_skin_density_3": { "value": 100 },
        "bridge_skin_material_flow": { "value": "material_flow" },
        "bridge_skin_material_flow_2": { "value": "material_flow" },
        "bridge_skin_material_flow_3": { "value": "material_flow" },
        "bridge_skin_speed": { "value": "speed_topbottom" },
        "bridge_skin_speed_2": { "value": "speed_topbottom" },
        "bridge_skin_speed_3": { "value": "speed_topbottom" },
        "bridge_sparse_infill_max_density": { "value": 50 },
        "bridge_wall_coast": { "value": 0 },
        "bridge_wall_material_flow": { "value": "material_flow" },
        "bridge_wall_speed": { "value": "speed_wall" },
        "brim_width": { "value": 5 },
        "cool_during_extruder_switch": { "value": "'only_last_extruder'" },
        "cool_fan_enabled":
        {
            "force_depends_on_settings": [ "support_extruder_nr" ]
        },
        "cool_fan_full_at_height": { "value": "1 if resolveOrValue('adhesion_type') == 'raft' else layer_height + layer_height_0" },
        "cool_fan_full_layer": { "value": "1 if resolveOrValue('adhesion_type') == 'raft' else 3" },
        "default_material_bed_temperature": { "resolve": "min(extruderValues('default_material_bed_temperature'))" },
        "extruder_prime_pos_abs": { "default_value": true },
        "gradual_support_infill_steps": { "value": 0 },
        "group_outer_walls": { "value": false },
        "infill_angles":
        {
            "value": [
                45,
                45,
                45,
                45,
                45,
                135,
                135,
                135,
                135,
                135
            ]
        },
        "infill_before_walls": { "value": false },
        "infill_material_flow": { "value": "material_flow" },
        "infill_overlap": { "value": 0 },
        "infill_pattern": { "value": "'zigzag'" },
        "infill_wipe_dist": { "value": 0 },
        "initial_layer_line_width_factor":
        {
            "maximum_value": 350,
            "maximum_value_warning": 320,
            "value": "100 if resolveOrValue('adhesion_type') == 'raft' else 200"
        },
        "inset_direction": { "value": "'inside_out'" },
        "jerk_enabled":
        {
            "enabled": false,
            "value": true
        },
        "jerk_infill":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_layer_0":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_prime_tower":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_print":
        {
            "enabled": false,
            "value": 6.25
        },
        "jerk_print_layer_0":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_roofing":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_support":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_support_bottom":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_support_infill":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_support_interface":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_support_roof":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_topbottom":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_travel":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_travel_enabled":
        {
            "enabled": false,
            "value": true
        },
        "jerk_travel_layer_0":
        {
            "enabled": false,
            "value": "jerk_travel"
        },
        "jerk_wall":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_wall_0":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_wall_0_roofing":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_wall_x":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "jerk_wall_x_roofing":
        {
            "enabled": false,
            "value": "jerk_print"
        },
        "layer_height_0": { "value": "layer_height if resolveOrValue('adhesion_type') == 'raft' else layer_height * 1.25" },
        "machine_acceleration": { "default_value": 3000 },
        "machine_center_is_zero": { "value": true },
        "machine_depth": { "default_value": 236.48 },
        "machine_disallowed_areas": { "value": "[ [ [-141.65, -118.11], [141.65, -118.11], [141.65, -95.205], [-141.65, -95.205] ], [ [-141.65, 118.37], [141.65, 118.37], [141.65, 95.205], [-141.65, 95.205] ], [ [-141.65, -118.11], [-114.249, -118.11], [-114.249, 118.37], [-141.65, 118.37] ], [ [76.149, -118.11], [141.65, -118.11], [141.65, 118.37], [76.149, 118.37] ] ] if max(extruderValues('extruder_nr')) == 0 else [ [ [-141.65, -118.11], [141.65, -118.11], [141.65, -95.205], [-141.65, -95.205] ], [ [-141.65, 118.37], [141.65, 118.37], [141.65, 95.205], [-141.65, 95.205] ], [ [-141.65, -118.11], [-76.149, -118.11], [-76.149, 118.37], [-141.65, 118.37] ], [ [76.149, -118.11], [141.65, -118.11], [141.65, 118.37], [76.149, 118.37] ] ]" },
        "machine_end_gcode": { "default_value": "" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_gcode_flavor": { "default_value": "Griffin" },
        "machine_heated_bed": { "default_value": false },
        "machine_heated_build_volume": { "default_value": true },
        "machine_height": { "default_value": 196.749 },
        "machine_min_cool_heat_time_window": { "value": 15 },
        "machine_name": { "default_value": "UltiMaker Method" },
        "machine_nozzle_cool_down_speed": { "value": 0.8 },
        "machine_nozzle_heat_up_speed": { "value": 3.5 },
        "machine_scale_fan_speed_zero_to_one": { "value": true },
        "machine_start_gcode": { "default_value": "G0 Z20" },
        "machine_width": { "default_value": 283.3 },
        "material_bed_temperature": { "enabled": "machine_heated_bed" },
        "material_final_print_temperature":
        {
            "maximum_value": "material_print_temperature",
            "minimum_value": "material_standby_temperature"
        },
        "material_flow": { "value": 100 },
        "material_initial_print_temperature":
        {
            "maximum_value": "material_print_temperature",
            "minimum_value": "material_standby_temperature",
            "value": "material_print_temperature-5"
        },
        "material_print_temperature":
        {
            "force_depends_on_settings": [ "support_extruder_nr" ]
        },
        "material_shrinkage_percentage": { "enabled": true },
        "min_bead_width": { "value": "0.75*line_width" },
        "min_wall_line_width": { "value": 0.4 },
        "minimum_support_area": { "value": 0.1 },
        "multiple_mesh_overlap": { "value": 0 },
        "optimize_wall_printing_order": { "value": true },
        "prime_blob_enable": { "enabled": false },
        "prime_tower_enable": { "default_value": true },
        "prime_tower_flow": { "value": "material_flow" },
        "prime_tower_line_width":
        {
            "maximum_value": 2,
            "maximum_value_warning": 1.5,
            "value": 1
        },
        "prime_tower_mode":
        {
            "resolve": "'normal'",
            "value": "'normal'"
        },
        "prime_tower_raft_base_line_spacing": { "value": "raft_base_line_width" },
        "prime_tower_wipe_enabled": { "value": true },
        "print_sequence": { "enabled": false },
        "raft_acceleration": { "enabled": false },
        "raft_airgap":
        {
            "force_depends_on_settings": [ "support_extruder_nr" ]
        },
        "raft_base_acceleration": { "enabled": false },
        "raft_base_extruder_nr":
        {
            "enabled": false,
            "value": "min(extruderValues('extruder_nr'))"
        },
        "raft_base_fan_speed": { "value": 0 },
        "raft_base_jerk": { "enabled": false },
        "raft_base_line_spacing":
        {
            "force_depends_on_settings": [ "raft_interface_extruder_nr" ],
            "value": "2*raft_base_line_width"
        },
        "raft_base_line_width":
        {
            "force_depends_on_settings": [ "raft_interface_extruder_nr" ],
            "maximum_value": 2.5,
            "maximum_value_warning": 1.8,
            "value": 1.4
        },
        "raft_base_thickness":
        {
            "force_depends_on_settings": [
                "raft_interface_extruder_nr",
                "support_extruder_nr"
            ],
            "value": 0.8
        },
        "raft_base_wall_count": { "value": "raft_wall_count" },
        "raft_interface_acceleration": { "enabled": false },
        "raft_interface_extruder_nr": { "value": "max(extruderValues('extruder_nr'))" },
        "raft_interface_fan_speed": { "value": 0 },
        "raft_interface_infill_overlap":
        {
            "force_depends_on_settings": [ "raft_interface_extruder_nr" ]
        },
        "raft_interface_infill_overlap_mm": { "maximum_value_warning": "2 * machine_nozzle_size" },
        "raft_interface_jerk": { "enabled": false },
        "raft_interface_layers": { "value": 2 },
        "raft_interface_line_spacing":
        {
            "force_depends_on_settings": [
                "raft_base_thickness",
                "raft_interface_extruder_nr"
            ],
            "minimum_value_warning": "raft_interface_line_width * 0.8"
        },
        "raft_interface_line_width":
        {
            "force_depends_on_settings": [
                "raft_base_thickness",
                "raft_interface_extruder_nr"
            ],
            "value": 0.7
        },
        "raft_interface_speed":
        {
            "force_depends_on_settings": [ "support_extruder_nr" ],
            "value": "raft_speed * 5"
        },
        "raft_interface_thickness": { "value": 0.3 },
        "raft_interface_wall_count": { "value": "raft_wall_count" },
        "raft_interface_z_offset":
        {
            "force_depends_on_settings": [
                "raft_base_thickness",
                "raft_interface_extruder_nr"
            ]
        },
        "raft_jerk": { "enabled": false },
        "raft_margin": { "value": 1.2 },
        "raft_smoothing": { "value": 9.5 },
        "raft_speed": { "value": 10 },
        "raft_surface_acceleration": { "enabled": false },
        "raft_surface_extruder_nr": { "value": "max(extruderValues('extruder_nr'))" },
        "raft_surface_fan_speed": { "value": 0 },
        "raft_surface_flow":
        {
            "force_depends_on_settings": [ "support_extruder_nr" ]
        },
        "raft_surface_jerk": { "enabled": false },
        "raft_surface_speed":
        {
            "force_depends_on_settings": [ "support_extruder_nr" ]
        },
        "raft_surface_thickness":
        {
            "force_depends_on_settings": [ "support_extruder_nr" ]
        },
        "raft_surface_wall_count": { "value": "raft_wall_count" },
        "raft_surface_z_offset":
        {
            "force_depends_on_settings": [ "support_extruder_nr" ]
        },
        "raft_wall_count": { "value": 2 },
        "retract_at_layer_change": { "value": true },
        "retraction_amount": { "value": 0.75 },
        "retraction_combing":
        {
            "enabled": false,
            "value": "'off'"
        },
        "retraction_combing_max_distance": { "value": "speed_travel / 10" },
        "retraction_count_max": { "value": 100 },
        "retraction_extrusion_window": { "value": 0 },
        "retraction_hop": { "value": 0.4 },
        "retraction_hop_enabled": { "value": true },
        "retraction_hop_only_when_collides": { "value": false },
        "retraction_min_travel":
        {
            "minimum_value_warning": "line_width * 1.25",
            "value": 0.6
        },
        "retraction_prime_speed": { "value": "retraction_speed" },
        "retraction_speed": { "value": 5 },
        "roofing_angles":
        {
            "value": [45, 135]
        },
        "roofing_layer_count":
        {
            "maximum_value_warning": 10,
            "minimum_value": 0,
            "minimum_value_warning": 1,
            "value": 2
        },
        "skin_angles":
        {
            "value": [0, 90]
        },
        "skin_material_flow": { "value": "material_flow" },
        "skin_material_flow_layer_0": { "value": "material_flow" },
        "skin_monotonic": { "value": true },
        "skin_outline_count": { "value": 0 },
        "skin_overlap": { "value": 0 },
        "skin_preshrink": { "value": 0 },
        "skirt_brim_extruder_nr":
        {
            "enabled": false,
            "value": "min(extruderValues('extruder_nr'))"
        },
        "skirt_brim_line_width": { "value": 1 },
        "skirt_brim_material_flow": { "value": "material_flow" },
        "skirt_brim_minimal_length": { "value": 500 },
        "skirt_gap": { "value": 2 },
        "skirt_height": { "value": 3 },
        "small_skin_width": { "value": 4 },
        "speed_equalize_flow_width_factor": { "value": 0 },
        "speed_prime_tower": { "value": "speed_topbottom" },
        "speed_print": { "value": 50 },
        "speed_roofing": { "value": "speed_wall_0" },
        "speed_support": { "value": "speed_wall" },
        "speed_support_interface": { "value": "speed_topbottom" },
        "speed_topbottom": { "value": "speed_wall" },
        "speed_travel": { "value": 250 },
        "speed_wall": { "value": "speed_print * 40/50" },
        "speed_wall_0": { "value": "speed_wall * 30/40" },
        "speed_wall_x": { "value": "speed_wall" },
        "support_angle": { "value": 40 },
        "support_bottom_height": { "value": "2*support_infill_sparse_thickness" },
        "support_bottom_line_width":
        {
            "maximum_value": 3,
            "maximum_value_warning": 1.8
        },
        "support_bottom_material_flow": { "value": "material_flow" },
        "support_bottom_wall_count":
        {
            "maximum_value": 8,
            "maximum_value_warning": 6,
            "value": 0
        },
        "support_brim_enable": { "value": false },
        "support_conical_min_width": { "value": 10 },
        "support_enable": { "value": true },
        "support_extruder_nr": { "value": "int(anyExtruderWithMaterial('material_is_support_material'))" },
        "support_fan_enable": { "value": "True" },
        "support_infill_angles":
        {
            "value": [
                45
            ]
        },
        "support_infill_rate": { "value": 20.0 },
        "support_infill_sparse_thickness": { "value": "layer_height" },
        "support_interface_enable": { "value": true },
        "support_interface_height": { "value": "4*support_infill_sparse_thickness" },
        "support_interface_material_flow": { "value": "material_flow" },
        "support_interface_offset": { "value": "1" },
        "support_interface_pattern": { "value": "'zigzag' if support_wall_count > 1 else 'lines'" },
        "support_interface_wall_count": { "value": "1" },
        "support_join_distance": { "value": "4.5 if support_wall_count > 1 else 2" },
        "support_material_flow": { "value": "material_flow" },
        "support_offset": { "value": "2.4 if support_wall_count > 1 else 1.8" },
        "support_pattern": { "value": "'zigzag' if support_wall_count > 1 else 'lines'" },
        "support_roof_height": { "value": "4*layer_height" },
        "support_roof_material_flow": { "value": "material_flow" },
        "support_supported_skin_fan_speed": { "value": "cool_fan_speed_max" },
        "support_use_towers": { "value": false },
        "support_wall_count": { "value": "2 if support_conical_enabled or support_structure == 'tree' else 0" },
        "support_xy_distance": { "value": 0.2 },
        "support_xy_distance_overhang": { "value": "support_xy_distance" },
        "switch_extruder_retraction_amount": { "value": 0.5 },
        "switch_extruder_retraction_speeds": { "value": "retraction_speed" },
        "top_bottom_pattern": { "value": "'zigzag'" },
        "top_bottom_pattern_0": { "value": "'zigzag'" },
        "top_bottom_thickness":
        {
            "minimum_value_warning": 0.3,
            "value": "4*layer_height"
        },
        "top_thickness":
        {
            "minimum_value_warning": 0.3,
            "value": "top_bottom_thickness * 1.5"
        },
        "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
        "travel_avoid_other_parts": { "value": false },
        "wall_0_inset": { "value": 0 },
        "wall_0_material_flow": { "value": "material_flow" },
        "wall_0_material_flow_layer_0": { "value": "material_flow" },
        "wall_0_wipe_dist": { "value": 0.8 },
        "wall_material_flow": { "value": "material_flow" },
        "wall_x_material_flow": { "value": "material_flow" },
        "wall_x_material_flow_layer_0": { "value": "material_flow" },
        "xy_offset": { "value": 0 },
        "xy_offset_layer_0": { "value": "xy_offset" },
        "z_seam_position": { "value": "'backright'" },
        "z_seam_relative": { "value": true },
        "z_seam_type": { "value": "'sharpest_corner'" },
        "zig_zaggify_infill": { "value": true }
    }
}