s3d_std0.6_COPA_C.inst.cfg 2.0 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364
  1. [general]
  2. version = 4
  3. name = C
  4. definition = strateo3d
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = c
  9. weight = 0
  10. material = emotiontech_copa
  11. variant = Standard 0.6
  12. [values]
  13. layer_height_0 = =round(0.67*machine_nozzle_size, 2)
  14. line_width = =machine_nozzle_size/machine_nozzle_size*0.6
  15. wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
  16. wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
  17. wall_0_wipe_dist = =machine_nozzle_size/2
  18. wall_line_count = 3
  19. speed_print = 35
  20. speed_wall = =math.ceil(speed_print * 40/55)
  21. speed_wall_0 = =math.ceil(speed_wall * 30/40)
  22. speed_topbottom = =math.ceil(speed_print * 37/55)
  23. speed_layer_0 = =math.ceil(speed_print * 27/55)
  24. speed_slowdown_layers = 2
  25. cool_fan_enabled = True
  26. cool_fan_speed = 20
  27. cool_fan_speed_max = 80
  28. cool_min_layer_time_fan_speed_max = 20
  29. cool_min_layer_time = 3
  30. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  31. cool_min_speed = 4
  32. cool_lift_head = True
  33. support_angle = 45
  34. material_print_temperature = =default_material_print_temperature
  35. material_print_temperature_layer_0 = =default_material_print_temperature + 5
  36. material_initial_print_temperature = =default_material_print_temperature
  37. material_final_print_temperature = =default_material_print_temperature
  38. material_flow = 90
  39. skin_material_flow = 92
  40. retraction_extra_prime_amount = 0.1
  41. retraction_min_travel = =3*line_width
  42. retraction_hop_only_when_collides = True
  43. skin_overlap = 5
  44. support_z_distance = =layer_height*2
  45. support_bottom_distance = =support_z_distance*0.5
  46. support_xy_distance = =line_width * 1.7
  47. support_xy_distance_overhang = =wall_line_width_0
  48. support_offset = 1
  49. support_interface_density = 100
  50. prime_tower_enable = True
  51. retraction_amount = 3
  52. retraction_speed = 35
  53. bridge_settings_enabled = True
  54. bridge_wall_coast = 50
  55. bridge_wall_speed = 10
  56. bridge_wall_material_flow = 50
  57. bridge_skin_speed = 10
  58. bridge_skin_material_flow = 60
  59. bridge_skin_density = 80
  60. bridge_fan_speed = 80
  61. meshfix_maximum_resolution = 0.5
  62. meshfix_maximum_deviation = 0.04