nwa3d_a31_e.inst.cfg 3.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117
  1. [general]
  2. version = 4
  3. name = 0.6 Engineering Quality
  4. definition = nwa3d_a31
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = Engineering
  9. weight = -2
  10. global_quality = True
  11. [values]
  12. layer_height = 0.28
  13. layer_height_0 = 0.4
  14. line_width = 0.6
  15. wall_line_width_0 = 0.6
  16. initial_layer_line_width_factor = 100
  17. wall_thickness = 1.2
  18. wall_0_wipe_dist = 0.2
  19. roofing_layer_count = 1
  20. top_bottom_thickness = 1.2
  21. top_layers = 5
  22. bottom_layers = 3
  23. top_bottom_pattern = lines
  24. top_bottom_pattern_0 = lines
  25. wall_0_inset = 0
  26. optimize_wall_printing_order = False
  27. inset_direction = inside_out
  28. alternate_extra_perimeter = False
  29. fill_outline_gaps = True
  30. xy_offset = 0
  31. skin_no_small_gaps_heuristic = True
  32. skin_outline_count = 1
  33. ironing_enabled = False
  34. infill_sparse_density = 15
  35. zig_zaggify_infill = False
  36. infill_multiplier = 1
  37. infill_wall_line_count = 0
  38. infill_overlap = 10
  39. skin_overlap = 5
  40. infill_wipe_dist = 0.15
  41. gradual_infill_steps = 0
  42. infill_before_walls = False
  43. infill_support_enabled = False
  44. max_skin_angle_for_expansion = 90
  45. material_diameter = 1.75
  46. default_material_print_temperature = 220
  47. material_print_temperature = 220
  48. material_print_temperature_layer_0 = 220
  49. material_initial_print_temperature = 220
  50. material_final_print_temperature = 220
  51. default_material_bed_temperature = 50
  52. material_bed_temperature = 50
  53. material_flow = 100
  54. retraction_enable = True
  55. retract_at_layer_change = False
  56. retraction_amount = 5
  57. retraction_speed = 45
  58. retraction_extra_prime_amount = 0
  59. retraction_min_travel = 1.2
  60. retraction_count_max = 90
  61. retraction_extrusion_window = 5
  62. limit_support_retractions = True
  63. switch_extruder_retraction_amount = 16
  64. switch_extruder_retraction_speeds = 20
  65. speed_print = 40
  66. speed_travel = 150
  67. speed_layer_0 = 10
  68. speed_travel_layer_0 = 40
  69. speed_slowdown_layers = 2
  70. acceleration_enabled = False
  71. jerk_enabled = False
  72. retraction_combing = off
  73. travel_retract_before_outer_wall = False
  74. retraction_hop_enabled = False
  75. cool_fan_enabled = True
  76. cool_fan_speed = 100
  77. cool_fan_speed_0 = 0
  78. cool_fan_full_layer = 3
  79. cool_lift_head = False
  80. support_enable = True
  81. support_type = everywhere
  82. support_angle = 50
  83. support_pattern = grid
  84. support_wall_count = 0
  85. zig_zaggify_support = False
  86. support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
  87. support_infill_angles = [0]
  88. support_brim_enable = True
  89. support_brim_line_count = 5
  90. support_z_distance = 0.34
  91. support_xy_distance = 0.7
  92. support_xy_distance_overhang = 0.2
  93. support_bottom_stair_step_height = 0.3
  94. support_bottom_stair_step_width = 5.0
  95. support_join_distance = 2.0
  96. support_offset = 0.2
  97. gradual_support_infill_steps = 0
  98. support_roof_enable = True
  99. support_bottom_enable = False
  100. support_roof_height = .45
  101. support_roof_density = 45
  102. support_roof_pattern = grid
  103. support_fan_enable = False
  104. support_use_towers = True
  105. support_tower_diameter = 3
  106. support_tower_roof_angle = 65
  107. adhesion_type = skirt
  108. skirt_line_count = 2
  109. skirt_gap = 3
  110. meshfix_union_all = True
  111. meshfix_union_all_remove_holes = False
  112. meshfix_extensive_stitching = False
  113. meshfix_keep_open_polygons = False
  114. multiple_mesh_overlap = 0.16
  115. carve_multiple_volumes = False