key3d_tyro_fast.inst.cfg 3.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120
  1. [general]
  2. version = 4
  3. name = Fast Quality
  4. definition = key3d_tyro
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = fast
  9. weight = -1
  10. global_quality = True
  11. [values]
  12. layer_height = 0.24
  13. layer_height_0 = 0.24
  14. line_width = 0.4
  15. initial_layer_line_width_factor = 100
  16. wall_thickness = 0.8
  17. wall_0_wipe_dist = 0.2
  18. roofing_layer_count = 1
  19. top_bottom_thickness = 0.6
  20. top_thickness = 0.8
  21. top_layers = 5
  22. bottom_thickness = 0.6
  23. bottom_layers = 3
  24. top_bottom_pattern = lines
  25. top_bottom_pattern_0 = lines
  26. wall_0_inset = 0
  27. optimize_wall_printing_order = False
  28. inset_direction = inside_out
  29. alternate_extra_perimeter = False
  30. fill_outline_gaps = True
  31. xy_offset = 0
  32. skin_no_small_gaps_heuristic = True
  33. skin_outline_count = 1
  34. ironing_enabled = False
  35. infill_sparse_density = 15
  36. zig_zaggify_infill = False
  37. infill_multiplier = 1
  38. infill_wall_line_count = 0
  39. infill_overlap = 10
  40. skin_overlap = 5
  41. infill_wipe_dist = 0.1
  42. gradual_infill_steps = 0
  43. infill_before_walls = False
  44. infill_support_enabled = False
  45. max_skin_angle_for_expansion = 90
  46. material_diameter = 1.75
  47. default_material_print_temperature = 220
  48. material_print_temperature = 220
  49. material_print_temperature_layer_0 = 220
  50. material_initial_print_temperature = 220
  51. material_final_print_temperature = 220
  52. default_material_bed_temperature = 0
  53. material_bed_temperature = 0
  54. build_volume_temperature = 0
  55. material_flow = 100
  56. retraction_enable = True
  57. retract_at_layer_change = False
  58. retraction_amount = 5
  59. retraction_speed = 45
  60. retraction_extra_prime_amount = 0
  61. retraction_min_travel = 0.8
  62. retraction_count_max = 90
  63. retraction_extrusion_window = 5
  64. limit_support_retractions = True
  65. switch_extruder_retraction_amount = 16
  66. switch_extruder_retraction_speeds = 20
  67. speed_print = 60
  68. speed_travel = 150
  69. speed_layer_0 = 10
  70. speed_travel_layer_0 = 50
  71. speed_slowdown_layers = 2
  72. acceleration_enabled = False
  73. acceleration_roofing = 3000
  74. jerk_enabled = False
  75. retraction_combing = off
  76. travel_retract_before_outer_wall = False
  77. retraction_hop_enabled = False
  78. cool_fan_enabled = True
  79. cool_fan_speed = 100
  80. cool_fan_speed_0 = 0
  81. cool_fan_full_at_height = 0.48
  82. cool_lift_head = False
  83. support_enable = True
  84. support_type = everywhere
  85. support_angle = 50
  86. support_pattern = grid
  87. support_wall_count = 0
  88. zig_zaggify_support = False
  89. support_infill_rate = =15 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 15
  90. support_infill_angles = [0]
  91. support_brim_enable = True
  92. support_brim_line_count = 5
  93. support_z_distance = 0.3
  94. support_xy_distance = 0.7
  95. support_xy_distance_overhang = 0.2
  96. support_bottom_stair_step_height = 0.3
  97. support_bottom_stair_step_width = 5.0
  98. support_join_distance = 2.0
  99. support_offset = 0.2
  100. gradual_support_infill_steps = 0
  101. support_roof_enable = True
  102. support_bottom_enable = False
  103. support_roof_height = 0.45
  104. support_roof_density = 45
  105. support_roof_pattern = lines
  106. support_fan_enable = False
  107. support_use_towers = True
  108. support_tower_diameter = 3
  109. support_tower_roof_angle = 65
  110. adhesion_type = skirt
  111. skirt_line_count = 2
  112. skirt_gap = 3
  113. meshfix_union_all = True
  114. meshfix_union_all_remove_holes = False
  115. meshfix_extensive_stitching = False
  116. meshfix_keep_open_polygons = False
  117. multiple_mesh_overlap = 0.16
  118. carve_multiple_volumes = False