cartesio_0.8_pva_extra_coarse.inst.cfg 1.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354
  1. [general]
  2. version = 4
  3. name = Extra Coarse
  4. definition = cartesio
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = extra coarse
  9. weight = 4
  10. material = generic_pva
  11. variant = 0.8mm thermoplastic extruder
  12. [values]
  13. infill_line_width = 0.9
  14. wall_thickness = 2.4
  15. top_bottom_thickness = =layer_height * 3
  16. wall_0_inset = -0.05
  17. infill_sparse_density = 40
  18. infill_pattern = grid
  19. material_print_temperature_layer_0 = =material_print_temperature + 5
  20. material_initial_print_temperature = =material_print_temperature_layer_0 + 5
  21. material_final_print_temperature = =material_print_temperature
  22. retraction_min_travel = =round(line_width * 10)
  23. retraction_prime_speed = 8
  24. switch_extruder_retraction_amount = 2
  25. switch_extruder_retraction_speeds = =retraction_speed
  26. switch_extruder_prime_speed = =retraction_prime_speed
  27. speed_print = 25
  28. speed_infill = =speed_print
  29. speed_layer_0 = =round(speed_print / 5 * 4)
  30. speed_wall = =round(speed_print / 2)
  31. speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
  32. speed_topbottom = =round(speed_print / 5 * 4)
  33. speed_travel = =round(speed_print if magic_spiralize else 150)
  34. speed_travel_layer_0 = =speed_travel
  35. speed_support_interface = =speed_topbottom
  36. retraction_hop_enabled = True
  37. retraction_hop = 1
  38. cool_min_layer_time_fan_speed_max = =cool_min_layer_time
  39. cool_min_layer_time = 20
  40. skirt_brim_minimal_length = 50
  41. coasting_enable = True
  42. coasting_volume = 0.1
  43. coasting_min_volume = 0.17
  44. coasting_speed = 90