Cura/resources/definitions/malyan_m200.def.json

{
    "version": 2,
    "name": "Malyan M200",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Brian Corbino, Tyler Gibson",
        "manufacturer": "Malyan",
        "file_formats": "text/x-gcode",
        "platform": "malyan_m200_platform.3mf",
        "first_start_actions": [ "MachineSettingsAction" ],
        "has_machine_quality": true,
        "has_materials": true,
        "machine_extruder_trains": { "0": "malyan_m200_extruder_0" },
        "platform_offset": [
            0,
            -0.25,
            0
        ],
        "preferred_quality_type": "normal",
        "supported_actions": [ "MachineSettingsAction" ],
        "supports_usb_connection": true
    },
    "overrides":
    {
        "adhesion_type": { "default_value": "raft" },
        "brim_width": { "default_value": 5 },
        "coasting_enable": { "default_value": true },
        "layer_height":
        {
            "default_value": 0.13125,
            "maximum_value_warning": "machine_nozzle_size * 0.48125 + 0.0875",
            "minimum_value_warning": "0.04375"
        },
        "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 120 },
        "machine_end_gcode": { "default_value": "G0 X0 Y120;(Stick out the part)\nM190 S0;(Turn off heat bed, don't wait.)\nG92 E10;(Set extruder to 10)\nG1 E7 F200;(retract 3mm)\nM104 S0;(Turn off nozzle, don't wait)\nG4 S300;(Delay 5 minutes)\nM107;(Turn off part fan)\nM84;(Turn off stepper motors.)" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 120 },
        "machine_max_acceleration_e": { "default_value": 10000 },
        "machine_max_acceleration_x": { "default_value": 800 },
        "machine_max_acceleration_y": { "default_value": 800 },
        "machine_max_acceleration_z": { "default_value": 20 },
        "machine_max_feedrate_e": { "default_value": 100 },
        "machine_max_feedrate_x": { "default_value": 150 },
        "machine_max_feedrate_y": { "default_value": 150 },
        "machine_max_feedrate_z": { "default_value": 1.5 },
        "machine_max_jerk_e": { "default_value": 5 },
        "machine_max_jerk_xy": { "default_value": 20 },
        "machine_max_jerk_z": { "default_value": 0.4 },
        "machine_name": { "default_value": "Malyan M200" },
        "machine_show_variants": { "default_value": true },
        "machine_start_gcode": { "default_value": "G21;(metric values)\nG90;(absolute positioning)\nM82;(set extruder to absolute mode)\nM107;(start with the fan off)\nG28;(Home the printer)\nG92 E0;(Reset the extruder to 0)\nG0 Z5 E5 F500;(Move up and prime the nozzle)\nG0 X-1 Z0;(Move outside the printable area)\nG1 Y60 E8 F500;(Draw a priming/wiping line to the rear)\nG1 X-1;(Move a little closer to the print area)\nG1 Y10 E16 F500;(draw more priming/wiping)\nG1 E15 F250;(Small retract)\nG92 E0;(Zero the extruder)" },
        "machine_width": { "default_value": 120 },
        "material_bed_temperature": { "minimum_value": "0" },
        "material_bed_temperature_layer_0": { "value": "min(material_bed_temperature + 5, 70)" },
        "material_print_temperature": { "minimum_value": "0" },
        "material_print_temperature_layer_0": { "value": "min(material_print_temperature + 5, 245)" },
        "material_standby_temperature": { "minimum_value": "0" },
        "raft_airgap": { "default_value": 0.2625 },
        "raft_base_thickness": { "value": "0.30625" },
        "raft_interface_thickness": { "value": "0.21875" },
        "raft_margin": { "default_value": 5 },
        "raft_surface_layers": { "default_value": 1 },
        "retraction_amount": { "default_value": 4.5 },
        "retraction_combing": { "value": "'noskin'" },
        "retraction_speed": { "default_value": 40 },
        "skirt_line_count": { "default_value": 2 },
        "speed_layer_0": { "value": "round(speed_print / 2.0, 2)" },
        "speed_print": { "default_value": 50 },
        "speed_support": { "value": "speed_wall_0" },
        "speed_topbottom": { "value": "speed_print / 2" },
        "speed_wall_0": { "value": "round(speed_print * 0.75, 2)" },
        "speed_wall_x": { "value": "speed_print" },
        "speed_z_hop": { "default_value": 1.5 }
    }
}