Cura/resources/definitions/geeetech_A30M.def.json

{
    "version": 2,
    "name": "Geeetech A30M",
    "inherits": "Geeetech_Base_Dual_Extruder",
    "metadata":
    {
        "visible": true,
        "machine_extruder_trains":
        {
            "0": "Geeetech_Dual_Extruder_0",
            "1": "Geeetech_Dual_Extruder_1"
        },
        "preferred_material": "Geeetech_PLA_Green"
    },
    "overrides":
    {
        "brim_width": { "value": 10 },
        "gantry_height": { "value": 35 },
        "machine_depth": { "default_value": 320 },
        "machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-75, 35],
                [18, 35],
                [18, -18],
                [-75, -18]
            ]
        },
        "machine_height": { "default_value": 420 },
        "machine_name": { "default_value": "Geeetech A30M" },
        "machine_start_gcode": { "default_value": ";Geeetech A30M Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
        "machine_width": { "default_value": 320 }
    }
}