Cura/resources/definitions/blocks_pros100.def.json

{
    "version": 2,
    "name": "Blocks Pro S100",
    "inherits": "blocks_base",
    "metadata":
    {
        "visible": true,
        "platform": "blocks_pros100_platform.stl",
        "machine_extruder_trains": { "0": "blocks_pros100_extruder_0" },
        "preferred_variant_name": "0.8mm Nozzle",
        "quality_definition": "blocks_base"
    },
    "overrides":
    {
        "machine_depth": { "default_value": 1000 },
        "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" },
        "machine_height": { "default_value": 1000 },
        "machine_name": { "default_value": "Blocks Pro S100" },
        "machine_start_gcode": { "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n" },
        "machine_width": { "default_value": 1000 },
        "retraction_retract_speed": { "value": 50 }
    }
}