abax_pri3.def.json 2.0 KB

12345678910111213141516171819202122232425262728293031
  1. {
  2. "version": 2,
  3. "name": "Abax PRi3",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Abax 3D Technologies",
  9. "manufacturer": "Abax 3D Technologies",
  10. "file_formats": "text/x-gcode",
  11. "has_machine_quality": "true",
  12. "machine_extruder_trains": { "0": "abax_pri3_extruder_0" }
  13. },
  14. "overrides":
  15. {
  16. "layer_height": { "default_value": 0.2 },
  17. "layer_height_0": { "default_value": 0.2 },
  18. "machine_center_is_zero": { "default_value": false },
  19. "machine_depth": { "default_value": 220 },
  20. "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set temp of bed to Zero \nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y215 ;move X to min and Y to max \nG90 ;set to absolute positioning\nM84 ;turn off steppers\n; -- end of END GCODE --" },
  21. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  22. "machine_heated_bed": { "default_value": false },
  23. "machine_height": { "default_value": 200 },
  24. "machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z5.0 F200 ;move Z to position 5.0 mm\nG92 E0 ;zero the extruded length\n; -- end of START GCODE --" },
  25. "machine_width": { "default_value": 225 },
  26. "speed_print": { "default_value": 40 },
  27. "support_enable": { "default_value": true },
  28. "top_bottom_thickness": { "default_value": 1 },
  29. "wall_thickness": { "value": "1" }
  30. }
  31. }