Cura/resources/definitions/raise3D_N2_single.def.json

{
    "version": 2,
    "name": "Raise3D N2 Single",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "Raise3D",
        "manufacturer": "Raise3D",
        "file_formats": "text/x-gcode",
        "has_materials": true,
        "machine_extruder_trains":
        {
            "0": "raise3D_N2_single_extruder_0"
        }
    },

    "overrides": {
        "machine_name": { "default_value": "Raise3D N2 Single" },
        "machine_width": {
            "default_value": 305
        },
        "machine_height": {
            "default_value": 305
        },
        "machine_depth": {
            "default_value": 305
        },
        "machine_center_is_zero": {
            "default_value": false
        },
        "machine_heated_bed": {
            "default_value": true
        },
        "machine_nozzle_heat_up_speed": {
            "default_value": 6
        },
        "machine_nozzle_cool_down_speed": {
            "default_value": 4
        },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [ -75, 35 ],
                [ -75, -18 ],
                [ 18, 35 ],
                [ 18, -18 ]
            ]
        },
        "machine_min_cool_heat_time_window": {
            "default_value": 3600
        },
        "retraction_amount": {
            "default_value": 1.0
        },
        "adhesion_type": {
            "default_value": "skirt"
        },
        "gantry_height": {
            "value": "55"
        },
        "machine_use_extruder_offset_to_offset_coords": {
            "default_value": true
        },
        "machine_gcode_flavor": {
            "default_value": "RepRap (Marlin/Sprinter)"
        },
        "machine_start_gcode": {
            "default_value": "G90\nG21\n; home all axes\nG28\nG92 X0 Y0 Z0\n; move heatbed into position\nG1 X20.0 Y20.0 Z1.0 F1000\n; zero extruders\nG92 E0 E1\nT0; right tool\n; set extruder steps per mm\nM92 E140\n; purge nozzle\nG1 E25 F250\n; zero extruders\nG92 E0 E1\n; move heatbed down a little more\nG1 Z5.0 F20\n; wait 600ms\nG4 600\n; move to tack down the strands\nG1 X20.0 Y30.0 Z0 F9000\n; wait 600ms\nG4 600\n;move up a bit\nG1 Z5.0 F9000\n; wait 300ms\nG4 300\n;fast move to center\nG1 X152.5 Y152.5 F9000\nT0\n;Raise3D Job Start\nM117 Printing...\nM1001\n"
        },
        "machine_end_gcode": {
            "default_value": "M107\nM1002\nM104 S0 T1\nM104 S0 T0\nM140 S0\nM117 Print Complete.\nG28 X0 Y0\nG91\nG1 Z10\nG90\nM84"
        },
        "prime_tower_position_x": {
            "value": "195"
        },
        "prime_tower_position_y": {
            "value": "149"
        }
    }
}