| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576 |
- [general]
- definition = dagoma_sigma
- name = 0.4mm
- version = 4
- [metadata]
- hardware_type = nozzle
- setting_version = 21
- type = variant
- [values]
- acceleration_enabled = True
- acceleration_infill = 3000
- acceleration_print = 1500
- acceleration_travel = 1500
- acceleration_travel_layer_0 = 2000
- acceleration_wall_0 = 850
- acceleration_wall_x = 1600
- bridge_fan_speed_2 = 100.0
- bridge_fan_speed_3 = 100.0
- bridge_settings_enabled = True
- bridge_skin_density = 95.0
- bridge_skin_density_2 = 85.0
- bridge_skin_density_3 = 95.0
- bridge_wall_min_length = 2.0
- bridge_wall_speed = 25.0
- carve_multiple_volumes = True
- coasting_enable = True
- cool_fan_full_at_height = 0.6
- cool_min_layer_time = 6.0
- cool_min_speed = 5.0
- infill_overlap = 2.0
- infill_sparse_density = 15
- infill_sparse_thickness = 0.4
- infill_wall_line_count = 1
- layer_height_0 = 0.25
- line_width = 0.4
- machine_nozzle_id = 0.4mm
- machine_nozzle_size = 0.4
- retract_at_layer_change = True
- retraction_combing = noskin
- retraction_combing_max_distance = 5.0
- retraction_count_max = 25
- retraction_extrusion_window = 1.0
- retraction_hop = 0.0
- retraction_hop_enabled = True
- retraction_speed = 45
- roofing_layer_count = 1
- roofing_line_width = 0.3
- roofing_material_flow = 95
- roofing_monotonic = True
- skin_outline_count = 2
- skirt_gap = 2.0
- small_hole_max_size = 4.0
- speed_infill = 60
- speed_layer_0 = 14
- speed_travel = 140
- speed_travel_layer_0 = 27
- support_angle = 50.0
- support_fan_enable = True
- support_infill_rate = =15 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 15
- support_infill_sparse_thickness = =resolveOrValue('layer_height')
- support_interface_enable = False
- support_interface_height = 1.0
- support_interface_pattern = zigzag
- support_structure = tree
- support_top_distance = 0.1
- support_type = buildplate
- support_xy_distance = 1.5
- support_xy_distance_overhang = =machine_nozzle_size / 2
- support_z_distance = 0.2
- top_bottom_thickness = 0.8
- top_thickness = 0.8
- travel_avoid_distance = 3.0
- travel_avoid_supports = True
|
