Cura/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg

[general]
version = 4
name = Fast
definition = ultimaker_s5

[metadata]
setting_version = 15
type = quality
quality_type = draft
weight = -2
material = generic_abs
variant = AA 0.4

[values]
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_print_temperature = =default_material_print_temperature + 20
material_initial_print_temperature = =material_print_temperature - 15
material_final_print_temperature = =material_print_temperature - 20
prime_tower_enable = False
skin_overlap = 20
speed_print = 60
speed_layer_0 = =math.ceil(speed_print * 20 / 60)
speed_topbottom = =math.ceil(speed_print * 35 / 60)
speed_wall = =math.ceil(speed_print * 45 / 60)
speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
wall_thickness = 1

infill_line_width = =round(line_width * 0.4 / 0.35, 2)
speed_infill = =math.ceil(speed_print * 50 / 60)