Cura/resources/quality/deltacomb/PETG/deltacomb_DBE0.60_PETG_E.inst.cfg

[general]
version = 4
name = E
definition = deltacomb_base

[metadata]
setting_version = 15
type = quality
quality_type = e
material = generic_petg
variant = DBE 0.60mm

[values]
adhesion_type = skirt
cool_fan_full_at_height = 1
cool_fan_speed = 60
cool_fan_speed_max = 100
cool_fan_speed_min = 60
speed_print = 40
speed_infill = =speed_print
speed_wall_0 = =speed_print * 0.7
speed_roofing = =speed_print * 0.7
default_material_print_temperature = 235
material_bed_temperature = 60
material_bed_temperature_layer_0 = 45
initial_layer_line_width_factor = 120
retraction_speed = 40
coasting_enable = True
coasting_volume = 0.256
retraction_combing_max_distance = 5