Cura/resources/definitions/tronxy_d01.def.json

{
    "name": "Tronxy D01",
    "version": 2,
    "inherits": "tronxy_x",
    "metadata": {
        "quality_definition": "tronxy_x",
        "visible": true,
        "author": "AdderMk2",
        "platform": "tronxy.stl"
    },
    "overrides": {
        "machine_name": { "default_value": "Tronxy D01" },
        "machine_width": { "default_value": 220 },
        "machine_depth": { "default_value": 220 },
        "machine_height": { "default_value": 220 },
        "machine_head_with_fans_polygon": { "default_value": [
                [-32, 45],
                [-32, -30],
                [32, -30],
                [32, 45]
            ]
        },
        "gantry_height": { "value": 30 },

        "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature}\nM104 S{material_print_temperature} T0\nM190 S{material_bed_temperature}\nM109 S{material_print_temperature} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y220.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y220.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish" },

        "machine_max_feedrate_x": { "value": 150 },
        "machine_max_feedrate_y": { "value": 150 },
        "machine_max_feedrate_z": { "value": 20 },
        "machine_max_feedrate_e": { "value": 120 },
        "machine_max_acceleration_x": { "value": 150 },
        "machine_max_acceleration_y": { "value": 150 },
        "machine_max_acceleration_z": { "value": 150 },
        "machine_max_acceleration_e": { "value": 150 },
        "machine_acceleration": { "value": 120 }
    }
}