Cura/resources/i18n/ko_KR/fdmextruder.def.json.po

# Cura
# Copyright (C) 2022 Ultimaker B.V.
# This file is distributed under the same license as the Cura package.
#
msgid ""
msgstr ""
"Project-Id-Version: Uranium json setting files\n"
"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
"POT-Creation-Date: 2022-04-13 10:49+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: fdmextruder.def.json
msgctxt "machine_settings label"
msgid "Machine"
msgstr "기기"

#: fdmextruder.def.json
msgctxt "machine_settings description"
msgid "Machine specific settings"
msgstr "기기 세부 설정"

#: fdmextruder.def.json
msgctxt "extruder_nr label"
msgid "Extruder"
msgstr "익스트루더"

#: fdmextruder.def.json
msgctxt "extruder_nr description"
msgid "The extruder train used for printing. This is used in multi-extrusion."
msgstr "프린팅에 사용되는 익스트루더 트레인. 이것은 다중 압출에 사용됩니다."

#: fdmextruder.def.json
msgctxt "machine_nozzle_id label"
msgid "Nozzle ID"
msgstr "노즐 ID"

#: fdmextruder.def.json
msgctxt "machine_nozzle_id description"
msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
msgstr "\"AA 0.4\"및 \"BB 0.8\"과 같은 익스트루더 트레인의 노즐 ID."

#: fdmextruder.def.json
msgctxt "machine_nozzle_size label"
msgid "Nozzle Diameter"
msgstr "노즐 직경"

#: fdmextruder.def.json
msgctxt "machine_nozzle_size description"
msgid ""
"The inner diameter of the nozzle. Change this setting when using a non-"
"standard nozzle size."
msgstr "노즐의 내경. 비표준 노즐 크기를 사용할 때, 이 설정을 변경하십시오."

#: fdmextruder.def.json
msgctxt "machine_nozzle_offset_x label"
msgid "Nozzle X Offset"
msgstr "노즐 X 오프셋"

#: fdmextruder.def.json
msgctxt "machine_nozzle_offset_x description"
msgid "The x-coordinate of the offset of the nozzle."
msgstr "노즐 오프셋의 x 좌표."

#: fdmextruder.def.json
msgctxt "machine_nozzle_offset_y label"
msgid "Nozzle Y Offset"
msgstr "노즐 Y 오프셋"

#: fdmextruder.def.json
msgctxt "machine_nozzle_offset_y description"
msgid "The y-coordinate of the offset of the nozzle."
msgstr "노즐 오프셋의 y 좌표."

#: fdmextruder.def.json
msgctxt "machine_extruder_start_code label"
msgid "Extruder Start G-Code"
msgstr "익스트루더 스타트 G 코드"

#: fdmextruder.def.json
msgctxt "machine_extruder_start_code description"
msgid "Start g-code to execute when switching to this extruder."
msgstr "이 익스트루더로 전환 시 실행할 G 코드를 시작하십시오."

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_abs label"
msgid "Extruder Start Position Absolute"
msgstr "익스트루더 시작 위치의 절대 값"

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_abs description"
msgid ""
"Make the extruder starting position absolute rather than relative to the "
"last-known location of the head."
msgstr "익스트루더 시작 위치를 헤드의 마지막으로 알려진 위치에 상대적이 아닌 절대 위치로 만듭니다."

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_x label"
msgid "Extruder Start Position X"
msgstr "익스트루더 시작 X의 위치"

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_x description"
msgid "The x-coordinate of the starting position when turning the extruder on."
msgstr "익스트루더를 켤 때 시작 위치의 x 좌표."

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_y label"
msgid "Extruder Start Position Y"
msgstr "익스트루더 시작 위치 Y"

#: fdmextruder.def.json
msgctxt "machine_extruder_start_pos_y description"
msgid "The y-coordinate of the starting position when turning the extruder on."
msgstr "익스트루더를 켤 때 시작 위치의 y 좌표."

#: fdmextruder.def.json
msgctxt "machine_extruder_end_code label"
msgid "Extruder End G-Code"
msgstr "익스트루더 엔드 G 코드"

#: fdmextruder.def.json
msgctxt "machine_extruder_end_code description"
msgid "End g-code to execute when switching away from this extruder."
msgstr "이 익스트루더에서 전환 시 실행할 G 코드를 종료하십시오."

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_abs label"
msgid "Extruder End Position Absolute"
msgstr "익스트루더 끝 절대 위치"

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_abs description"
msgid ""
"Make the extruder ending position absolute rather than relative to the last-"
"known location of the head."
msgstr "익스트루더가 헤드의 마지막으로 알려진 위치에 상대값이 아닌 절대 위치로 끝나도록 하십시오."

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_x label"
msgid "Extruder End Position X"
msgstr "익스트루더 끝 X 위치"

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_x description"
msgid "The x-coordinate of the ending position when turning the extruder off."
msgstr "익스트루더를 끌 때 끝 위치의 x 좌표."

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_y label"
msgid "Extruder End Position Y"
msgstr "익스트루더 끝 Y 위치"

#: fdmextruder.def.json
msgctxt "machine_extruder_end_pos_y description"
msgid "The y-coordinate of the ending position when turning the extruder off."
msgstr "익스트루더를 끌 때 종료 위치의 y 좌표."

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_z label"
msgid "Extruder Prime Z Position"
msgstr "익스트루더 프라임 Z 위치"

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_z description"
msgid ""
"The Z coordinate of the position where the nozzle primes at the start of "
"printing."
msgstr "프린팅이 시작될 때 노즐이 시작하는 위치의 Z 좌표입니다."

#: fdmextruder.def.json
msgctxt "machine_extruder_cooling_fan_number label"
msgid "Extruder Print Cooling Fan"
msgstr "익스트루더 프린팅 냉각 팬"

#: fdmextruder.def.json
msgctxt "machine_extruder_cooling_fan_number description"
msgid ""
"The number of the print cooling fan associated with this extruder. Only "
"change this from the default value of 0 when you have a different print "
"cooling fan for each extruder."
msgstr "이 익스트루더와 관련된 프린팅 냉각 팬의 개수. 각 익스트루더마다 다른 프린팅 냉각 팬이 있을 때만 기본값 0에서 변경하십시오."

#: fdmextruder.def.json
msgctxt "platform_adhesion label"
msgid "Build Plate Adhesion"
msgstr "빌드 플레이트 고정"

#: fdmextruder.def.json
msgctxt "platform_adhesion description"
msgid "Adhesion"
msgstr "고정"

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_x label"
msgid "Extruder Prime X Position"
msgstr "익스트루더 프라임 X 위치"

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_x description"
msgid ""
"The X coordinate of the position where the nozzle primes at the start of "
"printing."
msgstr "프린팅이 시작될 때 노즐이 시작하는 위치의 X 좌표."

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_y label"
msgid "Extruder Prime Y Position"
msgstr "익스트루더 프라임 Y 위치"

#: fdmextruder.def.json
msgctxt "extruder_prime_pos_y description"
msgid ""
"The Y coordinate of the position where the nozzle primes at the start of "
"printing."
msgstr "프린팅이 시작될 때 노즐이 시작하는 위치의 Y 좌표."

#: fdmextruder.def.json
msgctxt "material label"
msgid "Material"
msgstr "재료"

#: fdmextruder.def.json
msgctxt "material description"
msgid "Material"
msgstr "재료"

#: fdmextruder.def.json
msgctxt "material_diameter label"
msgid "Diameter"
msgstr "직경"

#: fdmextruder.def.json
msgctxt "material_diameter description"
msgid ""
"Adjusts the diameter of the filament used. Match this value with the "
"diameter of the used filament."
msgstr "사용 된 필라멘트의 직경을 조정합니다. 이 값을 사용 필라멘트의 직경과 일치시킵니다."

#~ msgctxt "machine_extruder_start_code description"
#~ msgid "Start g-code to execute whenever turning the extruder on."
#~ msgstr "익스트루더를 켤 때마다 실행할 스타드 g 코드."

#~ msgctxt "machine_extruder_end_code description"
#~ msgid "End g-code to execute whenever turning the extruder off."
#~ msgstr "익스트루더를 끌 때마다 실행할 엔드 g 코드."