| 123456789101112131415161718192021222324252627282930313233343536373839 |
- {
- "version": 2,
- "name": "Wanhao Duplicator 9",
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "manufacturer": "Wanhao",
- "file_formats": "text/x-gcode",
- "has_materials": true,
- "platform": "wanhao_300_300_platform.obj",
- "platform_texture": "Wanhaobackplate.png",
- "machine_extruder_trains": {
- "0": "wanhao_d9_extruder_0"
- },
- "platform_offset": [ 0, -55, 0]
- },
- "overrides": {
- "machine_name": { "default_value": "Wanhao Duplicator 9" },
- "machine_width": { "default_value": 300 },
- "machine_height": { "default_value": 400 },
- "machine_depth": { "default_value": 300 },
- "machine_heated_bed": { "default_value": true },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_start_gcode": {
- "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
- },
- "machine_end_gcode": {
- "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
- },
- "support_angle": { "default_value": 60 },
- "support_enable": { "default_value": true },
- "layer_height_0": { "default_value": 0.15 },
- "layer_height": { "default_value": 0.2 },
- "speed_print": { "default_value": 30 },
- "adhesion_type": { "default_value": "raft" },
- "support_z_distance": { "default_value": 0.22 }
- }
- }
|
