Cura/resources/definitions/flsun_sr.def.json

{
    "version": 2,
    "name": "Flsun Super Racer",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Thushan Fernando, Guislain Cyril",
        "manufacturer": "Flsun",
        "file_formats": "text/x-gcode",
        "platform": "flsun_sr.stl",
        "has_machine_quality": true,
        "has_materials": true,
        "machine_extruder_trains": { "0": "flsun_sr_extruder_0" },
        "platform_offset": [
            0,
            -81,
            -43.5
        ],
        "preferred_quality_type": "normal"
    },
    "overrides":
    {
        "gantry_height": { "value": "0" },
        "infill_sparse_density": { "default_value": 15 },
        "machine_center_is_zero": { "default_value": true },
        "machine_depth": { "default_value": 264 },
        "machine_end_gcode": { "default_value": "G91 ; relative coordinates\nG1 E-1 F300 ; retract filament a bit before lifting\nG1 Z+5 E-5 F6000 ; raise platform from current position\nG28 X0 Y0 ; home axis\nG90 ; absolute coordinates\nG92 E0 ; reset extruder\nM104 S0 ; turn off hotend\nM140 S0 ; turn off heat bed\nM107 ; turn off fans\nM84 ; disable motors\n" },
        "machine_extruder_count": { "default_value": 1 },
        "machine_gcode_flavor": { "default_value": "Marlin" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [0, 0],
                [0, 0],
                [0, 0],
                [0, 0]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 320 },
        "machine_nozzle_size": { "default_value": 0.4 },
        "machine_shape": { "default_value": "elliptic" },
        "machine_start_gcode": { "default_value": "G21 ; millimeter units\nG90 ; absolute coordinates\nM82 ; E absolute\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0}\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_initial_print_temperature}\nG28 ; home axis\nM420 S1 ; enable mesh leveling\n; Lower nozzle and move to start position\nG1 Z150\nG1 X-130 Y0 Z0.4 F3000\n; Extrude about 40 mm by printing a 90 degree arc\nG3 X0 Y-130 I130 Z0.3 E40 F2700\n; Retract and move nozzle up\nG92 E0\nG1 E-1.5 F1800\nG0 Z0.5\nG1 E0 F300\n" },
        "machine_width": { "default_value": 264 },
        "material_diameter": { "default_value": 1.75 },
        "retraction_enable": { "default_value": true },
        "z_seam_type": { "value": "'back'" }
    }
}