Cura/resources/definitions/deltacomb_base.def.json

{
    "version": 2,
    "name": "Deltacomb Base Printer",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": false,
        "author": "Gabriele Rossetti",
        "manufacturer": "Deltacomb 3D Printers",
        "file_formats": "text/x-gcode",
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains":
        {
            "0": "deltacomb_base_extruder_0",
            "1": "deltacomb_base_extruder_1",
            "2": "deltacomb_base_extruder_2",
            "3": "deltacomb_base_extruder_3"
        },
        "preferred_material": "generic_pla",
        "preferred_quality_type": "D020",
        "variants_name": "Head"
    },
    "overrides":
    {
        "acceleration_enabled": { "value": "True" },
        "acceleration_layer_0": { "value": "acceleration_wall_0" },
        "acceleration_prime_tower": { "value": "acceleration_wall" },
        "acceleration_print": { "value": "4000" },
        "acceleration_support": { "value": "acceleration_wall" },
        "acceleration_support_interface": { "value": "acceleration_wall_0" },
        "acceleration_topbottom": { "value": "acceleration_wall_0" },
        "acceleration_travel": { "value": "9000" },
        "acceleration_wall": { "value": "acceleration_print * 0.5" },
        "acceleration_wall_0": { "value": "acceleration_wall * 0.5" },
        "brim_width": { "value": "3" },
        "infill_before_walls": { "default_value": false },
        "infill_pattern": { "value": "'cubic'" },
        "infill_sparse_density": { "default_value": 30 },
        "jerk_enabled": { "value": "True" },
        "jerk_infill": { "value": "10" },
        "jerk_print": { "value": "25" },
        "jerk_travel": { "value": "10" },
        "machine_center_is_zero": { "default_value": true },
        "machine_end_gcode": { "default_value": ";---------------------------------------\n;Deltacomb end script\n;---------------------------------------\nG91 ;relative positioning\nG1 F15000 X8.0 E-4.5 ;Wipe filament+material retraction\nG1 F15000 E4.0 Z1 ;Retraction compensation\nG28 ;Home all axes (max endstops)\nM84 ;steppers off\n" },
        "machine_extruder_count":
        {
            "default_value": 1,
            "maximum_value": "4"
        },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_heated_bed": { "default_value": true },
        "machine_max_feedrate_z": { "default_value": 300 },
        "machine_shape": { "default_value": "elliptic" },
        "machine_start_gcode": { "default_value": ";---------------------------------------\n;Deltacomb start script\n;---------------------------------------\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ;Home all axes (max endstops)\nM420 S1; Bed Level Enable\nG92 E0 ;zero the extruded length\nG1 Z15.0 F9000 ;move to the platform down 15mm\nG1 F9000\n\n;Put printing message on LCD screen\nM117 In stampa...\nM140 S{print_bed_temperature} ;set the target bed temperature\n;---------------------------------------" },
        "prime_tower_brim_enable": { "value": false },
        "prime_tower_position_x": { "value": "prime_tower_size / 2" },
        "prime_tower_position_y": { "value": "machine_depth / 2 - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' or (prime_tower_brim_enable and adhesion_type != 'raft') else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
        "prime_tower_size": { "value": "math.sqrt(extruders_enabled_count * prime_tower_min_volume / layer_height / math.pi) * 2" },
        "retraction_amount": { "default_value": 3.5 },
        "retraction_combing": { "value": "'noskin'" },
        "retraction_hop": { "default_value": 1.0 },
        "retraction_hop_enabled": { "default_value": true },
        "retraction_hop_only_when_collides": { "value": "1" },
        "retraction_speed": { "default_value": 40 },
        "roofing_layer_count": { "value": "1" },
        "roofing_line_width": { "value": "line_width * 0.75" },
        "skirt_brim_minimal_length": { "default_value": 150 },
        "skirt_brim_speed": { "value": "speed_layer_0" },
        "skirt_line_count": { "default_value": 3 },
        "speed_layer_0": { "value": "speed_print * 0.55" },
        "speed_print": { "default_value": 80 },
        "speed_topbottom": { "value": "speed_print * 0.90" },
        "speed_travel": { "value": "170" },
        "speed_travel_layer_0": { "value": "speed_travel * 0.70" },
        "speed_wall_0": { "value": "35 if speed_print > 35 else speed_print" },
        "speed_z_hop": { "value": "speed_travel" },
        "support_bottom_distance": { "value": "layer_height" },
        "support_bottom_enable": { "value": false },
        "support_use_towers": { "default_value": false },
        "support_wall_count": { "value": "1" },
        "support_z_distance": { "value": "layer_height" },
        "switch_extruder_retraction_amount": { "value": 10 },
        "switch_extruder_retraction_speeds": { "default_value": 70 },
        "top_bottom_thickness": { "default_value": 0.8 },
        "travel_avoid_distance": { "value": "1" },
        "travel_avoid_supports": { "value": "True" },
        "z_seam_corner": { "value": "'z_seam_corner_weighted'" }
    }
}