Cura/resources/definitions/abax_pri3.def.json

{
    "version": 2,
    "name": "Abax PRi3",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Abax 3D Technologies",
        "manufacturer": "Abax 3D Technologies",
        "file_formats": "text/x-gcode",
        "has_machine_quality": "true",
        "machine_extruder_trains": { "0": "abax_pri3_extruder_0" }
    },
    "overrides":
    {
        "layer_height": { "default_value": 0.2 },
        "layer_height_0": { "default_value": 0.2 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 220 },
        "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y215                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --" },
        "machine_gcode_flavor": { "default_value": "RepRap" },
        "machine_heated_bed": { "default_value": false },
        "machine_height": { "default_value": 200 },
        "machine_start_gcode": { "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --" },
        "machine_width": { "default_value": 225 },
        "speed_print": { "default_value": 40 },
        "support_enable": { "default_value": true },
        "top_bottom_thickness": { "default_value": 1 },
        "wall_thickness": { "value": "1" }
    }
}